Acknowledgement
Supported by : Universidad de la Costa
References
- ACI 211.1-91 (1991), Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete, American Concrete Institute, Farmington Hills, MI, USA.
- Ahmadi, B. and Al-Khaja, W. (2001), "Utilization of paper waste sludge in the building construction industry", Resour. Conserv. Recycl., 32(2), 105-113. https://doi.org/10.1016/S0921-3449(01)00051-9
- Akcaozoglu, S., Atis, C.D. and Akcaozoglu, K. (2010), "An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete", Waste Manag., 30(2), 285-290. https://doi.org/10.1016/j.wasman.2009.09.033
- Akram, A., Sasidhar, C. and Pasha, K. (2015), "E-Waste Management by Utilization of E-Plastics in Concrete Mixtures as Coarse Aggregate Replacement", Int. J. Innov. Res. Sci. Eng. Technol., 4(7), 5087-5095. https://doi.org/10.15680/IJIRSET.2015.0407008
- Andrade, L.B., Rocha, J.C. and Cheriaf, M. (2009), "Influence of coal bottom ash as fine aggregate on fresh properties of concrete", Constr. Build. Mater., 23(2), 609-614. https://doi.org/10.1016/j.conbuildmat.2008.05.003
- Argos-Productos (2017), Cemento Gris Uso General, Argos, Medellin, Colombia.
- Arora, A. and Dave, U. (2013), "Utilization of E-waste and plastic bottle waste", Int. J. Stud. Res. Technol. Manage., 1(4), 398-406.
- Asociacion Colombiana de Ingenieria Sismica (2010), Reglamento Colombiano de Construccion Sismo Resistente (NSR-10), Bogota D.C., Colombia.
- Asokan, P., Osmani, M. and Price, A. (2010), "Improvement of the mechanical properties of glass fibre reinforced plastic waste powder filled concrete", Constr. Build. Mater., 24(4), 448-460. https://doi.org/10.1016/j.conbuildmat.2009.10.017
- ASTM C1157/C1157M-11 (2011), Standard Performance Specification for Hydraulic Cement, ASTM International, West Conshohocken, PA, USA.
- ASTM C136/C136M-14 (2014), Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA, USA.
- ASTM C143/C143M-15a (2015), Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM International, West Conshohocken, PA, USA.
- ASTM C192/C192M-16a (2016), Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International,West Conshohocken, PA, USA.
- ASTM C39/C39M-16b (2016), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International,West Conshohocken, PA, USA.
- ASTM D256-10e1 (2010), Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics, ASTM International,West Conshohocken, PA, USA.
- ASTM D638-14 (2014), Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA, USA.
- ASTM D785-08 (2015), Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials, ASTM International,West Conshohocken, PA, USA.
- ASTM D790-15e2 (2015), Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM International, West Conshohocken, PA.
- Baffa, I. and Akasaki, J. (2005), "Light-concrete with leather: durability aspects", International Conference for Structures, Coimbra, Portugal.
- Batayneh, M., Marie, I. and Asi, I. (2007), "Use of selected waste materials in concrete mixes", Waste Manage., 27(12), 1870-1876. https://doi.org/10.1016/j.wasman.2006.07.026
- Bompa, D.V. and Elghazouli, A.Y. (2017), "Bond-slip response of deformed bars in rubberised concrete", Constr. Build. Mater., 154, 884-898. https://doi.org/10.1016/j.conbuildmat.2017.08.016
- Bompa, D.V., Elghazouli, A.Y., Xu, B., Stafford, P.J. and Ruiz-Teran, A.M. (2017), "Experimental assessment and constitutive modelling of rubberised concrete materials", Constr. Build. Mater., 137, 246-260. https://doi.org/10.1016/j.conbuildmat.2017.01.086
- Cyr, M. and Ludmann, C. (2006), "Low risk meat and bone meal (MBM) bottom ash in mortars as sand replacement", Cement Concrete Res., 36(3), 469-480. https://doi.org/10.1016/j.cemconres.2005.09.009
- DANE (2016), Indicadores Basicos de Tenencia y Uso de Tecnologias de la Informacion y Comunicacion-TIC en Hogares y Personas de 5 y mas anos de edad 2015, DANE, Bogota D.C., Colombia.
- Elghazouli, A.Y., Bompa, D.V., Xu, B., Stafford, P.J. and Ruiz-Teran, A.M. (2018), "Inelastic behaviour of RC members incorporating high deformability concrete", High Tech Concrete: Where Technology and Engineering Meet, Springer International Publishing, Cham.
- Gawatre, D., Damal, V., Londhe, S., Mane, A. and Ghawate, H. (2015), "Environmental issues of plastic waste use in concrete", Int. J. Innov. Res. Adv. Eng., 2(5), 114-117.
- Guney, Y., Sari, Y.D., Yalcin, M., Tuncan, A. and Donmez, S. (2010), "Re-usage of waste foundry sand in high-strength concrete", Waste Manage., 30(8-9), 1705-1713. https://doi.org/10.1016/j.wasman.2010.02.018
- Jo, B.W., Park, S.K. and Park, J.C. (2008), "Mechanical properties of polymer concrete made with recycled PET and recycled concrete aggregates", Constr. Build. Mater., 22(12), 2281-2291. https://doi.org/10.1016/j.conbuildmat.2007.10.009
- Kim, H.K. and Lee, H.K. (2011), "Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete", Constr. Build. Mater., 25(2), 1115-1122. https://doi.org/10.1016/j.conbuildmat.2010.06.065
- Kinuthia, J., Snelson, D. and Gailius, A. (2009), "Sustainable medium-strength concrete (CS-concrete) from colliery spoil in South Wales UK", J. Civ. Eng. Manage., 15(2), 149-157. https://doi.org/10.3846/1392-3730.2009.15.149-157
- Kurup, A.R. and Senthil Kumar, K. (2017), "Novel fibrous concrete mixture made from recycled PVC fibers from electronic waste", J. Hazard. Toxic Radioact. Waste, 21(2), 4016020. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000338
- Lakshmi, R. and Nagan, S. (2010), "Studies on concrete containing E plastic waste", Int. J. Environ. Sci., 1(3), 270-281.
- Lakshmi, R. and Nagan, S. (2011), "Investigations on durability characteristics of E-plastic waste incorporated concrete", Asian J. Civil Eng. (Build. Hous.), 12(6), 773-787.
- Manatkar, P. and Deshmukh, G. (2015), "Use of non-metallic ewaste as a coarse aggregate in a concrete", Int. J. Res. Eng. Technol., 4(3), 242-246.
- Manjunath, A. (2016), "Partial replacement of E-plastic Waste as Coarse-aggregate in Concrete", Procedia Environ. Sci., 35, 731-739. https://doi.org/10.1016/j.proenv.2016.07.079
- Ministerio de Ambiente (2014), Reciclar, Una Nueva Costumbre, El Espectador, 129-136.
- Naik, T.R., Friberg, T.S. and Chun, Y. (2004), "Use of pulp and paper mill residual solids in production of cellucrete", Cement Concrete Res., 34(7), 1229-1234. https://doi.org/10.1016/j.cemconres.2003.12.013
- Pacheco-Torgal, F. and Jalali, S. (2010), "Reusing ceramic wastes in concrete", Constr. Build. Mater., 24(5), 832-838. https://doi.org/10.1016/j.conbuildmat.2009.10.023
- Papayianni, I. and Anastasiou, E. (2010), "Production of highstrength concrete using high volume of industrial by-products", Constr. Build. Mater., 24(8), 1412-1417. https://doi.org/10.1016/j.conbuildmat.2010.01.016
- Plastics International (2017), ABS, Plastics International, Eden Prairie, MN, USA.
- Rao, S.M., Reddy, B.V.V., Lakshmikanth, S. and Ambika, N.S. (2009), "Re-use of fluoride contaminated bone char sludge in concrete", J. Hazard. Mater., 166(2-3), 751-756. https://doi.org/10.1016/j.jhazmat.2008.11.115
- Sadrmomtazi, A., Dolati-Milehsara, S., Lotfi-Omran, O. and Sadeghi-Nik, A. (2016), "The combined effects of waste Polyethylene Terephthalate (PET) particles and pozzolanic materials on the properties of self-compacting concrete", J. Clean. Prod., 112, 2363-2373. https://doi.org/10.1016/j.jclepro.2015.09.107
- Sales, A. and de Souza, F.R. (2009), "Concretes and mortars recycled with water treatment sludge and construction and demolition rubble", Constr. Build. Mater., 23(6), 2362-2370. https://doi.org/10.1016/j.conbuildmat.2008.11.001
- Santiago, E.Q.R., Lima, P.R.L., Leite, M.B. and Toledo Filho, R.D. (2009), "Mechanical behavior of recycled lightweight concrete using EVA waste and CDW under moderate temperature", Rev. IBRACON Estruturas E Mater., 2(3), 211-221. https://doi.org/10.1590/S1983-41952009000300001
- Senthil Kumar, K. and Baskar, K. (2014), "Response surfaces for fresh and hardened properties of concrete with E-waste (HIPS)", J. Waste Manag., 2014, Article ID 517219.
- Senthil Kumar, K. and Baskar, K. (2015a), "Development of ecofriendly concrete incorporating recycled high-impact polystyrene from hazardous electronic waste", J. Hazard. Toxic Radioact. Waste, 19(3), 4014042. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000265
- Senthil Kumar, K. and Baskar, K. (2015b), "Recycling of E-plastic waste as a construction material in developing countries", J. Mater. Cycles Waste Manage., 17(4), 718-724. https://doi.org/10.1007/s10163-014-0303-5
- Senthil Kumar, K., Premalatha, P.V. and Baskar, K. (2017), "Evaluation of transport properties of concrete made with Ewaste plastic", J. Test. Eval., 45(5), 20160008. https://doi.org/10.1520/JTE20160008
- Senthil Kumar, K., Premalatha, P.V., Baskar, K., Sankaran Pillai, G. and Shahul Hameed, P. (2018), "Assessment of radioactivity in concrete made with e-waste plastic", J. Test. Eval., 46(2), 20160006. https://doi.org/10.1520/JTE20160006
- Siddique, R., Khatib, J. and Kaur, I. (2008), "Use of recycled plastic in concrete: A review", Waste Manage., 28(10), 1835-1852. https://doi.org/10.1016/j.wasman.2007.09.011
- Silva, R.V., de Brito, J. and Saikia, N. (2013), "Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates", Cememt Concrete Compos., 35(1), 23-31. https://doi.org/10.1016/j.cemconcomp.2012.08.017
- Teo, D.C.L., Mannan, M.A. and Kurian, V.J. (2010), "Durability of lightweight OPS concrete under different curing conditions", Mater. Struct., 43(1-2), 1-13.
- Vargas, J. and Polo, E. (2017), "Obtencion de una mezcla de concreto con residuos plasticos de equipos electronicos para la fabricacion de elementos no estructurales", Universidad de la Costa, Barranquilla, Colombia.
- Wang, C.C., Chen, T.T., Wang, H.Y. and Huang, C. (2014), "A predictive model for compressive strength of waste LCD glass concrete by nonlinear-multivariate regression", Comput. Concrete, 13(4), 531-545. https://doi.org/10.12989/cac.2014.13.4.531
- Wang, H.Y. and Chen, J.S. (2008), "Study of thin film transition liquid crystal display (TFT-LCD) optical waste glass applied in early-high-strength controlled low strength materials", Comput. Concrete, 5(5), 491-501. https://doi.org/10.12989/cac.2008.5.5.491
- Wang, H.Y., Hsiao, D.H. and Wang, S.Y. (2012), "Properties of recycled green building materials applied in lightweight aggregate concrete", Comput. Concrete, 10(2), 95-104. https://doi.org/10.12989/cac.2012.10.2.095
- Xu, B., Bompa, D.V., Elghazouli, A.Y., Ruiz-Teran, A.M. and Stafford, P.J. (2018), "Behaviour of rubberised concrete members in asymmetric shear tests", Constr. Build. Mater., 159, 361-375. https://doi.org/10.1016/j.conbuildmat.2017.10.091
- Yellishetty, M., Karpe, V., Reddy, E.H., Subhash, K.N. and Ranjith, P.G. (2008), "Reuse of iron ore mineral wastes in civil engineering constructions: A case study", Resour. Conserv. Recycl., 52(11), 1283-1289. https://doi.org/10.1016/j.resconrec.2008.07.007
- Yuksel, I., Siddique, R. and Ozkan, O. (2011), "Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement", Constr. Build. Mater., 25(2), 967-972. https://doi.org/10.1016/j.conbuildmat.2010.06.085