Figure 1. The circularity distribution of (a) non-circularized UHMWPE powder and (b) circularized UHMWPE powder.
Figure 2. The particle shape images of (a) non-circularized UHMWPE powder and (b) circularized UHMWPE powder.
Figure 3. Tactile meter.
Figure 4. The tribological properties of UHMWPE/HDPE composites as a function of UHMWPE content: (a) abrasion resistance of UHMWPE/HDPE composites and (b) plane friction coefficient of UHMWPE/HDPE composites.
Figure 5. The mechanical properties of UHMWPE/HDPE composites as a function of UHMWPE content: (a) tensile strengths of UHMWPE/HDPE composites and (b) IZOD impact strengths of UHMWPE/HDPE composites.
Table 1. Compositions of UHMWPE/HDPE Composites
References
- W.-Y. Jung and J.-I. Weon, "Characterization of Thermal Degradation for High Density Polyethylene : Mechanical and Thermal Behaviors and Long-Term Lifetime Prediction", Polymer(Korea), 39, 873 (2015).
- S. Ronca, "Brydson's Plastics Materials", ed. by M. Gilbert, 8th Ed. p247, Elsevier Ltd., Cambridge (2017).
- M. H. Jung, J. C. Kim, and J.-H. Chang, "Ultra High Molecular Weight Polyethylene Nanocomposite Films: Thermomechanical Property, Morphology, and Gas Permeability", Polymer(Korea), 31, 428 (2007).
- J.-H. Lee and H.-I. Kim, "Effect of Surface Oxidation on Welding Properties of Polyethylene Pipe", Polymer(Korea), 41, 139 (2017).
- J. Tong, Y. Ma, R. D. Arnell, and L. Ren, "Free abrasive wear behavior of UHMWPE composites filled with wollastonite fibers", Compos. Part A: Appl. Sci. Manuf., 37, 38 (2006). https://doi.org/10.1016/j.compositesa.2005.05.023
- F. Zivic, M. Babic, S. Mitrovic, D. Adamovic, and S. Pelemis, "Friction Coefficient of UHMWPE During Dry Reciprocating Sliding", Tribology in Industry, 36, 281 (2014).
- S. Wannasri, S. V. Panin, L. R. Ivanova, L. A. Kornienko, and S. Piriyayon, "Increasing wear resistance of UHMWPE by mechanical activation and chemical modification combined with addition of nanofibers", Procedia Eng., 1, 67 (2009). https://doi.org/10.1016/j.proeng.2009.06.018
- G. Sui, W. H. Zhong, X. Ren, X. Q. Wang, and X. P. Yang, "Structure, mechanical properties and friction behavior of UHMWPE/HDPE/carbon nanofibers", Mater. Chem. Phys., 115, 404 (2009). https://doi.org/10.1016/j.matchemphys.2008.12.016
- D.-Y. Yi, "Performance Improvement of Epoxy Resin System by the Filler Reformation", J Korean Inst. IIIum. Electr. Install. Eng., 24, 130 (2010).
- K. H. Lee, J. S. Jung, S. W. Han, J. U. Ha, H. W. Lee, and J. S. Oh, "The Tactile Assessment of Skin Materials in Automotive Interior", Polymer(Korea) (in press)
- D.-X. Li, W.-J. Li, Y. Xie, and X.-X. L, "Effects of solid lubricants on friction and wear behaviors of polyamide 6", J. Appl. Polym. Sci., 124, 4239 (2012). https://doi.org/10.1002/app.35409
- N. Chand, U. K. Dwivedi, and M. K. Sharma, "Development and tribological behaviour of UHMWPE filled epoxy gradient composites", Wear, 262, 184 (2007). https://doi.org/10.1016/j.wear.2006.04.012
- C. Z. Liu, J. Q. Wu, J. Q. Li, L. Q. Ren, J. Tong, and A. D. Arnell, "Tribological behaviours of PA/UHMWPE blend under dry and lubricating condition", Wear, 260, 109 (2006). https://doi.org/10.1016/j.wear.2004.12.044
- H.-G. Wang, L.-Q. Jian, B.-L. Pan, J.-Y. Zhang, S.-R. Yang, and H.-G. Wang, "Mechanical and Tribological Behaviors of Polyamide 66/Ultra high Molecular Weight Polyethylene Blends", Polym. Eng. Sci., 47, 738 (2007). https://doi.org/10.1002/pen.20748
- A. D. A. Lucas, J. D. Ambrosio, H. Otaguro, L. C. Costa, and J. A. M. Agnelli, "Abrasive wear of HDPE/UHMWPE blends", Wear, 270, 576 (2011). https://doi.org/10.1016/j.wear.2011.01.011
- A. B. Boscoletto, R. Franco, M. Scapin, and M. Tavan, "An investigation on rheological and impact behaviour of high density and ultra high molecular weight polyethylene mixtures", Eur. Polym. J., 33, 97 (1997). https://doi.org/10.1016/S0014-3057(96)00115-2
- M. F. Diop, W. R. Burghardt, and J. M. Torkelson, "Wellmixed blends of HDPE and ultrahigh molecular weight polyethylene with major improvements in impact strength achieved via solid-state shear pulverization", Polymer, 55, 4948 (2014). https://doi.org/10.1016/j.polymer.2014.07.050