Corrosion Science and Technology

  • 제17권6호
  • /
  • Pages.265-271
  • /
  • 2018
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Analysis of CRUD Flake Applied to Abnormal High Beam Current by Shielded-EPMA

  • Jung, Y.H. (Korea Atomic Energy Research Institute) ;
  • Baik, S.J. (Korea Atomic Energy Research Institute) ;
  • Ahn, S.B. (Korea Atomic Energy Research Institute)
  • 투고 : 2018.10.18
  • 심사 : 2018.12.03
  • 발행 : 2018.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

CRUD specimens, scraped from twice-burned fuel cladding in the Korean Nuclear Power Plant, were analyzed using Shielded-EPMA. The principal elements of the CRUD were identified as Ni and Fe, at an approximate ratio of 1.3 Ni/Fe. To investigate the morphology and composition of the pure metallic materials in the CRUD, coolant impurities must be removed. This can be accomplished by increasing the EPMA current to an abnormally high intensity until the impurities are melted. Normally, EPMA applications are performed at conditions of 20 kV voltage and 20 nA current. But in our study, the applied current was increased up to 1200 nA, over time increments ranging from 5 to 30 seconds. This technique was performed by opening an adjustable aperture for the gun alignment. Results showed impurities contained in the CRUD material disappeared and pure metal materials, e.g., Ni and Fe, remained. This method presents an innovative way to analyze CRUD.

키워드

E1COB2_2018_v17n6_265_f0001.png 이미지

Fig. 1 The scraper structure and working in the KNPP poolside.

E1COB2_2018_v17n6_265_f0002.png 이미지

Fig. 2 Trail covered with pine leaves(a), CRUD collection filter(b) and optical photograph(c) (x350).

E1COB2_2018_v17n6_265_f0003.png 이미지

Fig. 3 SEM and x-ray map of a CRUD flake. Applied to normal beam current injection.

E1COB2_2018_v17n6_265_f0004.png 이미지

Fig. 4 Before abnormal high beam current injection (Beam condition: 20 kV, 20 nA).

E1COB2_2018_v17n6_265_f0005.png 이미지

Fig. 5 EPMA monitor(a), Burning spot on monitor(b), CRUD flake before and after burning (c, d) and Close-up image of after burning CRUD (e, f). (Beam conditions: 20 kV, 1200 nA, Beam exposure time: 5 sec)

E1COB2_2018_v17n6_265_f0006.png 이미지

Fig. 6 After burn, remained metallic CRUD precipitate no1~no 3 analyses (SEM x10,000).

Table 1. Chemical composition of CRUD flakes at area measured by EPMA normal analysis (at%)

E1COB2_2018_v17n6_265_t0001.png 이미지

Table 2 CRUD Mass by ICP-MES Analysis, μg/filter (Oxygen Not Included)

E1COB2_2018_v17n6_265_t0002.png 이미지

Table 3 After burning, remained metallic quantitative analyses. (Beam conditions: 20 kV, 20 nA)

E1COB2_2018_v17n6_265_t0003.png 이미지

참고문헌

  1. C. S. Olsen, Nucl. Eng. Des., 89, 51 (1985). https://doi.org/10.1016/0029-5493(85)90142-6
  2. D. L. Porter, Chemical gradients in CRUD on BWR Reactor Fuel Elements, INL/CON-07-12474.
  3. D. H. Lister, G. Venkateswaran, and N. Arbeau, Nucl. Technol., 140, 288 (2002). https://doi.org/10.13182/NT02-A3340
  4. W. A. Byers and J. Deshon, Proc. Int. Conf., pp. 11 - 14, Water Chemistry in Nuclear Reactors Systems Conference, San Francisco, USA (2004).
  5. NRC Information Notice No. 97-85, Effects of CRUD Buildup and Boron Deposition on Power Distribution and Shutdown Margin, (1997).
  6. J. Deshon and D. Hussey, J. Min. Met. Mat. S., 63, 64 (2011).
  7. J. Y. Yeon, J. Nucl. Mater., 354, 163 (2006). https://doi.org/10.1016/j.jnucmat.2006.03.017
  8. M. C. Song and K. J. Lee, Ann. Nucl. Energy, 30, 1231 (2003). https://doi.org/10.1016/S0306-4549(03)00054-9
  9. J. Gardner, Proc. Int. Conf., Water Chemistry in Nuclear Reactors Systems Conference, October 11-14, San Francisco, USA (2004).
  10. M. hagiinuma, S. Ono, M. Sambongi, K. Takeda, K. tachibana, and K. Ishigure, Proc. JAIF Int. Conf., Water Chem. Nucl. Power Plants, October 13-16, Kashiwazaki, Japan (1989).
  11. R. Brutsch and D. Gavillet, HOTLAB Plenary Meeting, September 6-8, Halden, Norway (2004).
  12. M. C. Song and K. J. Lee, Nucl. Eng. Des., 229, 101 (2004). https://doi.org/10.1016/j.nucengdes.2003.12.006