Steel and Composite Structures

  • 제29권6호
  • /
  • Pages.759-770
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical approaches for vibration response of annular and circular composite plates

  • Baltacioglu, Ali Kemal (Akdeniz University, Engineering Faculty, Civil Engineering Department, Division of Mechanics) ;
  • Civalek, Omer (Akdeniz University, Engineering Faculty, Civil Engineering Department, Division of Mechanics)
  • 투고 : 2018.09.22
  • 심사 : 2018.12.11
  • 발행 : 2018.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

In the present investigation, by using the two numerical methods, free vibration analysis of laminated annular and annular sector plates have been studied. In order to obtain the main equations two different shell theories such as Love's shell theory and first-order shear deformation theory (FSDT) have been used for modeling. After obtaining the fundamental equations in briefly, the methods of harmonic differential quadrature (HDQ) and discrete singular convolution (DSC) are used to solve the equation of motion. Accuracy, convergence and reliability of the present HDQ and DSC methods were tested by comparing the existing results obtained by different methods in the literature. The effects of some geometric and material properties of the plates are investigated via these two methods. The advantages and accuracy of the HDQ and DSC methods have also been examined with different grid numbers and shell theory. Some results for laminated annular plates and laminated circular plates were also been supplied.

키워드

과제정보

연구 과제 주관 기관 : Unit of Akdeniz University

참고문헌

  1. Abdelaziz, H.H., Meziane, M.A.A., Bousahla, A.A., Tounsi, A., Mahmoud, S.R. and Alwabli, A.S. (2017), "An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions", Steel Compos. Struct., Int. J., 25(6), 693-704.
  2. Aleksandrova, N.N. (2016), "Effect of thermal gradients on stress/strain distributions in a thin circular symmetric plate", Struct. Eng. Mech., Int. J., 58(4), 627-639. https://doi.org/10.12989/sem.2016.58.4.627
  3. Arefi, M, Mohammadi, M., Tabatabaeian, A., Dimitri, R. and Tornabene, F. (2018), "Two-dimensional thermo-elastic analysis of FG-CNTRC cylindrical pressure vessels", Steel and Compos. Struct., Int. J., 27(4), 525-536.
  4. Thai, H.T. and Kim, S.E. (2013), "A simple quasi-3D sinusoidal shear deformation theory for functionally graded plates", Compos. Struct., 99, 172-180. https://doi.org/10.1016/j.compstruct.2012.11.030
  5. Bouchafa, A., Bouiadjra, M.B., Houari, M.S.A. and Tounsi, A. (2015), "Thermal stresses and deflections of functionally graded sandwich plates using a new refined hyperbolic shear deformation theory", Steel Compos. Struct., Int. J., 18(6), 1493-1515. https://doi.org/10.12989/scs.2015.18.6.1493
  6. Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., Int. J., 58(3), 397-422. https://doi.org/10.12989/sem.2016.58.3.397
  7. Baltacioglu, A.K., Akgoz, B. and Civalek, O. (2010), "Nonlinear static response of laminated composite plates by discrete singular convolution method", Compos. Struct., 93, 153-161. https://doi.org/10.1016/j.compstruct.2010.06.005
  8. Baltacioglu, A.K., Civalek, O., Akgoz, B. and Demir, F. (2011), "Large deflection analysis of laminated composite plates resting on nonlinear elastic foundations by the method of discrete singular convolution", Int. J. Pres. Ves. Pip., 88, 290-300. https://doi.org/10.1016/j.ijpvp.2011.06.004
  9. Civalek, O. (1998), "Finite Element analysis of plates and shells", M.Sc. Dissertation; Firat University, Elazig, Turkey.
  10. Civalek, O. (2004), "Geometrically non-linear static and dynamic analysis of plates and shells resting on elastic foundation by the method of polynomial differential quadrature (PDQ)", Ph.D. Dissertation; Firat University, Elazig, Turkey.
  11. Civalek, O. (2006a), "The determination of frequencies of laminated conical shells via the discrete singular convolution method", J. Mech. Mater. Struct., 1(1), 163-182. https://doi.org/10.2140/jomms.2006.1.163
  12. Civalek, O. (2006b), "Free vibration analysis of composite conical shells using the discrete singular convolution algorithm", Steel Compos. Struct., Int. J., 6(4), 353-366. https://doi.org/10.12989/scs.2006.6.4.353
  13. Civalek, O. (2008), "Analysis of thick rectangular plates with symmetric cross-ply laminates based on first-order shear deformation theory", J. Compos. Mater., 42, 2853-2867. https://doi.org/10.1177/0021998308096952
  14. Civalek, O. (2013a), "Vibration analysis of laminated composite conical shells by the method of discrete singular convolution based on the shear deformation theory", Compos. Part B: Eng., 45(1), 1001-1009. https://doi.org/10.1016/j.compositesb.2012.05.018
  15. Civalek, O. (2013b), "Nonlinear dynamic response of laminated plates resting on nonlinear elastic foundations by the discrete singular convolution-differential quadrature coupled approaches", Compos. Part B: Eng., 50, 171-179. https://doi.org/10.1016/j.compositesb.2013.01.027
  16. Civalek, O. (2017), "Free vibration of carbon nanotubes reinforced (CNTR) and functionally graded shells and plates based on FSDT via discrete singular convolution method", Compos. Part B: Eng., 111, 45-59. https://doi.org/10.1016/j.compositesb.2016.11.030
  17. Civalek, O. and Acar, M.H. (2007), "Discrete singular convolution method for the analysis of Mindlin plates on elastic foundations", Int. J. Pres. Ves. Pip., 84, 527-535. https://doi.org/10.1016/j.ijpvp.2007.07.001
  18. Civalek, O. and Akgoz, B. (2011), "Nonlinear vibration analysis of laminated plates resting on nonlinear two-parameters elastic foundations", Steel Compos. Struct., Int. J., 11(5), 403-421. https://doi.org/10.12989/scs.2011.11.5.403
  19. Civalek, O., Korkmaz, A. and Demir, C. (2010), "Discrete singular convolution approach for buckling analysis of rectangular Kirchhoff plates subjected to compressive loads on two opposite edges", Adv. Eng. Softw., 41, 557-560. https://doi.org/10.1016/j.advengsoft.2009.11.002
  20. Civalek, O., Mercan, K. and Demir, C. (2016), "Vibration analysis of FG cylindrical shells with power-law index using discrete singular convolution technique", Curved Layer. Struct., 3, 82-90.
  21. Demir, C., Mercan, K. and Civalek, O. (2016), "Determination of critical buckling loads of isotropic, FGM and laminated truncated conical panel", Compos. Part B Eng., 94, 1-10. https://doi.org/10.1016/j.compositesb.2016.03.031
  22. Duan, G., Wang, X. and Jin, C. (2014), "Free vibration analysis of circular thin plates with stepped thickness by the DSC element method", Thin Wall. Struct., 85, 25-33. https://doi.org/10.1016/j.tws.2014.07.010
  23. Fantuzzi, N. and Tornabene, F. (2014), "Strong formulation finite element method for arbitrarily shaped laminated plates- Part I. Theoretical analysis", Adv. Aircr. Spacecr. Sci., 1, 125-143. https://doi.org/10.12989/aas.2014.1.2.125
  24. Gurses, M., Civalek, O., Korkmaz, A. and Ersoy, H. (2009), "Free vibration analysis of symmetric laminated skew plates by discrete singular convolution technique based on first-order shear deformation theory", Int. J. Numer. Methods Eng., 79, 290-313. https://doi.org/10.1002/nme.2553
  25. Gurses, M., Akgoz, B. and Civalek, O. (2012), "Mathematical modeling of vibration problem of nano-sized annular sector plates using the nonlocal continuum theory via eight-node discrete singular convolution transformation", Appl. Math. Comput., 219, 3226-3240.
  26. Hamzehkolaei, N.S., Malekzadeh, P. and Vaseghi, J. (2011), "Thermal effect on axisymmetric bending of functionally graded circular and annular plates using DQM", Steel Compos. Struct., Int. J., 11(4), 341-358. https://doi.org/10.12989/scs.2011.11.4.341
  27. Hou, Y., Wei, G.W. and Xiang, Y. (2005), "DSC-Ritz method for the free vibration analysis of Mindlin plates", Int. J. Num. Meth. Eng., 62, 262-288. https://doi.org/10.1002/nme.1186
  28. Jhung, M.J., Choi, Y.H. and Kim, H.J. (2005), "Natural vibration characteristics of a clamped circular plate in contact with fluid", Struct. Eng. Mech., Int. J., 21(2), 169-184. https://doi.org/10.12989/sem.2005.21.2.169
  29. Khare, S. and Mittal, N.D. (2016), "Three-dimensional free vibration analysis of thick laminated circular plates", Int. J. Eng., Sci. Technol., 8(2), 11-29. https://doi.org/10.4314/ijest.v8i2.2
  30. Khare, S. and Mittal, N.D. (2017), "Free vibration of thick laminated circular and annular plates using three-dimensional finite element analysis", AEJ - Alexandria Eng. J., 57(3), 1217-1228.
  31. Leissa, A.W. (1993), Vibration of Shells, Acoustical Society of America, Melville, NY, USA.
  32. Malekzadeh, P. (2009), "Three-dimensional free vibration analysis of thick laminated annular sector plates using a hybrid method", Compos. Struct., 90, 428-437. https://doi.org/10.1016/j.compstruct.2009.04.015
  33. Mercan, K. and Civalek, O. (2016), "DSC method for buckling analysis of boron nitride nanotube (BNNT) surrounded by an elastic matrix", Compos. Struct., 143, 300-309. https://doi.org/10.1016/j.compstruct.2016.02.040
  34. Pang, F., Li, H., Miao, X. and Wang, X. (2017), "A modified Fourier solution for vibration analysis of moderately thick laminated annular sector plates with general boundary conditions, internal radial line and circumferential arc supports", Curved Layer. Struct., 4, 189-220.
  35. Qatu, M. (2004), Vibration of Laminated Shells and Plates, Academic Press, UK.
  36. Reddy, J.N. (2003), Mechanics of Laminated Composite Plates And Shells: Theory and Analysis, (2nd Edition), CRC Press, New York, NY, USA.
  37. Saidi, A.R., Baferani, A.H. and Jomehzadeh, E. (2011), "Benchmark solution for free vibration of functionally graded moderately thick annular sector plates", Acta Mech., 219, 309-335. https://doi.org/10.1007/s00707-011-0459-1
  38. Sharma, A., Sharda, H.B. and Nath, Y. (2005), "Stability and vibration of thick laminated composite sector plates", J. Sound Vib., 287, 1-23. https://doi.org/10.1016/j.jsv.2004.10.030
  39. Shu, C. and Xue, H. (1997), "Explicit computations of weighting coefficients in the harmonic differential quadrature", J. Sound Vib., 204(3), 549-555. https://doi.org/10.1006/jsvi.1996.0894
  40. Soedel, W. (2004), Vibrations of Shells and Plates, (3rd Edition), CRC Press, New York, NY, USA.
  41. Striz, A.G., Wang, X. and Bert, C.W. (1995), "Harmonic differential quadrature method and applications to analysis of structural components", Acta Mech., 111, 85-94. https://doi.org/10.1007/BF01187729
  42. Su, Z., Jin, G. and Ye, T. (2014), "Three-dimensional vibration analysis of thick functionally graded conical, cylindrical shell and annular plate structures with arbitrary elastic restraints", Compos. Struct., 118, 432-447. https://doi.org/10.1016/j.compstruct.2014.07.049
  43. Su, Z., Jin, G. and Wang, X. (2015), "Free vibration analysis of laminated composite and functionally graded sector plates with general boundary conditions", Compos. Struct., 132, 720-736. https://doi.org/10.1016/j.compstruct.2015.06.008
  44. Tong, L. (1994), "Free vibration of laminated conical shells including transverse shear deformation", Int. J. Solids Struct., 31, 443-456. https://doi.org/10.1016/0020-7683(94)90085-X
  45. Tornabene, F. and Fantuzzi, N. (2014), Mechanics of Laminated Composite Doubly-curved Shell Structures, the Generalized Differential Quadrature Method and the Strong Formulation Finite Element Method, Societa Editrice Esculapio, Bologna, Italy.
  46. Tornabene, F., Fantuzzi, N., Viola, E. and Ferreira, A.J.M. (2013), "Radial basis function method applied to doubly-curved laminated composite shells and panels with a General Higherorder Equivalent Single Layer formulation", Compos. Part B: Eng., 55, 642-659. https://doi.org/10.1016/j.compositesb.2013.07.026
  47. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2014), "The local GDQ method applied to general higher-order theories of doubly-curved laminated composite shells and panels: the free vibration analysis", Compos. Struct., 116, 637-660. https://doi.org/10.1016/j.compstruct.2014.05.008
  48. Tornabene, F., Fantuzzi, N., Bacciocchi, M. and Viola, E. (2016), "Effect of agglomeration on the natural frequencies of functionally graded carbon nanotube-reinforced laminated composite doubly-curved shells", Compos. Part B: Eng., 89, 187-218. https://doi.org/10.1016/j.compositesb.2015.11.016
  49. Tahouneh, V. (2014), "Free vibration analysis of bidirectional functionally graded annular plates resting on elastic foundations using differential quadrature method", Struct. Eng. Mech., Int. J., 52, 663-686. https://doi.org/10.12989/sem.2014.52.4.663
  50. Wang, X., Wang, Y. and Xu, S. (2012), "DSC analysis of a simply supported anisotropic rectangular plate", Compos. Struct., 94, 2576-2584. https://doi.org/10.1016/j.compstruct.2012.03.005
  51. Wang, Q., Shi, D., Liang, Q. and Ahad, F. (2016a), "An improved Fourier series solution for the dynamic analysis of laminated composite annular, circular, and sector plate with general boundary conditions", J. Compos. Mater., 50(30), 4199-4233. https://doi.org/10.1177/0021998316635240
  52. Wang, Q., Shi, D., Liang, Q. and e Ahad, F. (2016b), "A unified solution for free in-plane vibration of orthotropic circular, annular and sector plates with general boundary conditions", Appl. Math. Model., 40(21), 9228-9253. https://doi.org/10.1016/j.apm.2016.06.005
  53. Wei, G.W. (2001a), "Vibration analysis by discrete singular convolution", J. Sound Vib., 244, 535-553. https://doi.org/10.1006/jsvi.2000.3507
  54. Wei, G.W. (2001b), "Discrete singular convolution for beam analysis", Eng. Struct., 23, 1045-1053. https://doi.org/10.1016/S0141-0296(01)00016-5
  55. Wei, G.W., Zhao, Y.B. and Xiang, Y. (2001), "The determination of natural frequencies of rectangular plates with mixed boundary conditions by discrete singular convolution" Int. J. Mech. Sci., 43, 1731-1746. https://doi.org/10.1016/S0020-7403(01)00021-2
  56. Wei, G.W., Zhao, Y.B. and Xiang, Y. (2002a), "A novel approach for the analysis of high-frequency vibrations", J. Sound Vib., 257, 207-246. https://doi.org/10.1006/jsvi.2002.5055
  57. Wei, G.W., Zhao, Y.B. and Xiang, Y. (2002b), "Discrete singular convolution and its application to the analysis of plates with internal supports. Part 1: Theory and algorithm", Int. J. Num. Meth. Eng., 55, 913-946. https://doi.org/10.1002/nme.526
  58. Wu, C.P. and Yu, L.T. (2016), "A state space meshless method for the 3D analysis of FGM axisymmetric circular plates", Steel Compos. Struct., Int. J., 22(1), 161-182. https://doi.org/10.12989/scs.2016.22.1.161
  59. Wu, C.P. and Yu, L.T. (2018), "Quasi-3D static analysis of twodirectional functionally graded circular plates", Steel Compos. Struct., Int. J., 27(6), 789-801.
  60. Yousefzadeh, S., Jafari, A.A., Mohammadzadeh, A. and Najafi, M. (2018), "Dynamic response of functionally graded annular/circular plate in contact with bounded fluid under harmonic load", Struct. Eng. Mech., Int. J., 65, 523-533.

피인용 문헌

  1. Free vibration analysis of angle-ply laminated composite and soft core sandwich plates vol.33, pp.5, 2019, https://doi.org/10.12989/scs.2019.33.5.663