Abstract
Image data collected by an airborne hyperspectral camera system have a great usability in coastal line mapping, detection of facilities composed of specific materials, detailed land use analysis, change monitoring and so forh in a complex coastal area because the system provides almost complete spectral and spatial information for each image pixel of tens to hundreds of spectral bands. A few approaches after classifying by a few approaches based on SAM(Spectral Angle Mapper) supervised classification were applied for extracting optimal land cover information from hyperspectral images acquired by CASI-1500 airborne hyperspectral camera on the object of a coastal area which includes both land and sea water areas. We applied three different approaches, that is to say firstly the classification approach of combined land and sea areas, secondly the reclassification approach after decompostion of land and sea areas from classification result of combined land and sea areas, and thirdly the land area-only classification approach using atmospheric correction images and compared classification results and accuracies. Land cover classification was conducted respectively by selecting not only four band images with the same wavelength range as IKONOS, QuickBird, KOMPSAT and GeoEye satelllite images but also eight band images with the same wavelength range as WorldView-2 from 48 band hyperspectral images and then compared with the classification result conducted with all of 48 band images. As a result, the reclassification approach after decompostion of land and sea areas from classification result of combined land and sea areas is more effective than classification approach of combined land and sea areas. It is showed the bigger the number of bands, the higher accuracy and reliability in the reclassification approach referred above. The results of higher spectral resolution showed asphalt or concrete roads was able to be classified more accurately.
항공기 탑재용 초분광 카메라시스템에 의해 얻어진 영상데이터는 수십 내지 수백의 연속된 초분광 해상도로부터 동시에 각 화소별 완전한 분광 및 공간정보를 포함하고 있으므로 복잡한 연안지역에 대한 해안선 매핑, 특정재료로 이루어진 시설물 탐지, 연안지역의 토지이용 상세분석 및 변화 모니터링 등에 그 활용잠재성이 대단히 크다. 육역과 해역을 포함하는 연안지역을 대상으로 항공기 탑재 초분광센서인 CASI-1500으로부터 취득된 초분광 항공영상을 이용하여 분광각매퍼(SAM;Spectral Angle Mapper) 감독분류방법으로 토지피복분류를 행하였다. 첫번째, 대기보정영상에 대하여 육역과 해역이 포함된 지역에 대한 통합분류, 두번째, 육 해역의 통합분류결과로부터 육역과 해역의 분리 후 재분류, 그리고 세번째로 육역만을 대상으로 한 분류를 각각 수행하여 결과 및 정확도를 비교하였다. 또한 초분광 항공영상 48개 밴드로부터 IKONOS, QuickBird, KOMPSAT, GeoEye 등 고해상도 위성영상과 동일한 파장대의 4개 밴드영상, 그리고 WorldView-2 위성영상과 동일한 파장대의 8개 밴드영상만을 선택하여 각각 토지피복분류를 수행하고 초분광 48개 밴드영상으로 분류한 결과와 비교하였다. 연구결과, 연안지역에 대한 육역과 해역 통합영상으로 분류하는 것에 비해 육역과 해역 통합영상으로 분류한 후 육역과 해역을 분리하여 재분류를 수행하는 것이 효과적인 것으로 나타났다. 육역의 분류 결과에서 분광해상도가 높은 영상의 결과일수록 아스팔트나 콘크리트 도로가 더 정확하게 분류되었다.