Computers and Concrete

  • 제21권3호
  • /
  • Pages.321-333
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Punching shear behavior of recycled aggregate concrete

  • Dan, Saikat (Department of Civil Engineering, Indian Institute of Technology) ;
  • Chaudhary, Manpreet (Department of Civil Engineering, Indian Institute of Technology) ;
  • Barai, Sudhirkumar V. (Department of Civil Engineering, Indian Institute of Technology)
  • 투고 : 2016.07.04
  • 심사 : 2018.01.04
  • 발행 : 2018.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Flat-slabs, being a significant structural component, not only reduce the dead load of the structure but also reduce the amount of concrete required for construction. Moreover the use of recycled aggregates lowers the impact of large scale construction to nearby ecosystems. Recycled aggregate based concrete being a quasi-brittle material shows enormous cracking during failure. Crack growth in flat-slabs is mostly in sliding mode (Mode II). Therefore sufficient sections need to be provided for resistance against such failure modes. The main objective of the paper is to numerically determine the ultimate load carrying capacity of two self-similar flat-slab specimens and validate the results experimentally for the natural aggregate as well as recycled aggregate based concrete. Punching shear experiments are carried out on circular flat-slab specimen on a rigid circular knife-edge support built out of both normal (NAC) and recycled aggregate concrete (RAC, with full replacement). Uniaxial compression and bending tests have been conducted on cubes, cylinders and prisms using both types of concrete (NAC and RAC) for its material characterization and use in the numerical scheme. The numerical simulations have been conducted in ABAQUS (a known finite element software package). Eight noded solid elements have been used to model the flat slab and material properties have been considered from experimental tests. The inbuilt Concrete Damaged Plasticity model of ABAQUS has been used to monitor crack propagation in the specimen during numerical simulations.

키워드

참고문헌

  1. ACI 555R-01 (2001), Removal and Reuse of Hardened Concrete, Michigan, USA.
  2. Bathe, K.J. (2007), Finite Element Procedures, Prentice Hall, New Jersey, USA
  3. Bazant, Z and Kazemi, M.T. (1990), "Determination of fracture energy, process zone length and brittleness number from size effect, with application to rock and concrete", Int. J. Fract., 44, 111-131. https://doi.org/10.1007/BF00047063
  4. Bazant, Z. and Oh, B.H. (1983), "Crack band theory for fracture of concrete", Mater. Struct., 16, 155-177.
  5. Bazant, Z. (1984), "Size effect in blunt fracture: concrete, rock and metal", J. Eng. Mech., 110(4), 518-535 https://doi.org/10.1061/(ASCE)0733-9399(1984)110:4(518)
  6. Belen, G.F., Fernando, M.A., Diego, C.L. and Sindy, S.P. (2011), "Stress-strain relationship in axial compression for concrete using recycled saturated coarse aggregate", Constr. Build. Mater., 25, 2335-2342. https://doi.org/10.1016/j.conbuildmat.2010.11.031
  7. Bhikshma, V. and Kishore, R, (2010), "Development of stressstrain curves for recycled aggregate concrete", Asian J. Civil Eng. (Build. Hous.), 11(2), 253-261.
  8. Casuccio, M., Torrijos, M.C., Giaccio, G. and Zerbino, R (2008), "Failure mechanisms of recycled aggregate concrete", Constr. Build. Mater., 22, 1500-1506. https://doi.org/10.1016/j.conbuildmat.2007.03.032
  9. Chen, A., Xia, X., Zhang, Q. and Wu, M. (2012), "The meso-level numerical experiment research of the mechanics properties of recycled concrete", J. Softw., 7(9), 1932-1940.
  10. Cusatis, G., Pelessone, D. and Mencarelli, A. (2011), "Lattice discrete particle model (LDPM) for failure behavior of concrete. I: Theory", Cement Concrete Compos., 33, 881-890. https://doi.org/10.1016/j.cemconcomp.2011.02.011
  11. De Proft, K., Wells, G.N., Sluys, L.J. and De Wilde, W.P. (2004), "An experimental-computational investigation of fracture in brittle materials", Comput. Concrete, 1(3), 227-248. https://doi.org/10.12989/cac.2004.1.3.227
  12. Folino, P. and Hernan, X. (2014), "Recycled aggregate concrete- Mechanical behavior under uniaxial and triaxial compression", Constr. Build. Mater., 56, 21-31. https://doi.org/10.1016/j.conbuildmat.2014.01.073
  13. Gonzalez-Fonteboa, B., Martinez-Abella, F., Herrador, M.F. and Seara-Paz, S. (2012), "Structural recycled concrete: Behavior under low loading rate", Constr. Build. Mater., 28, 111-116. https://doi.org/10.1016/j.conbuildmat.2011.08.010
  14. Hillerborg, A., Modeer, M. and Petersson, P.E. (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6, 773-782. https://doi.org/10.1016/0008-8846(76)90007-7
  15. Hutton, D.V. (2004), Fundamentals of Finite Element Analysis, McGraw Hill, New York, USA.
  16. IS 456 (2000), Plain and Reinforced Concrete-Code of Practice, Bureau of Indian Standards, New Delhi, India.
  17. Jo, B.W., Tae, G.H., Schlangen, E. and Kim, C.H. (2005), "Crack propagation simulation of concrete with the regular triangular lattice model", Comput. Concrete, 2(2), 165-176. https://doi.org/10.12989/cac.2005.2.2.165
  18. Kumar, C.N.S. and Rao, T.G. (2012), "Punching shear resistance of concrete slabs using mode-II fracture energy", Eng. Fract. Mech., 83, 75-85. https://doi.org/10.1016/j.engfracmech.2012.01.004
  19. Li, W., Xiao, J. and Corr, D. J. (2013), "Numerical Modelling on the Stress-Strain Response and Fracture of Modelled Recycled Aggregate Concrete", Proceedings of the 13th International Conference on Fracture, Beijing, China, June.
  20. Manual, ABAQUS User'S (2012), Version 6.12, Karlsson & Sorensen, Hibbitt Inc.
  21. Ottosen, N.S. (1977), "A failure criterion for concrete", J. Eng. Mech. Div., 103(EM4), 527-535.
  22. Popovics, S. (1973), "A numerical approach to the complete stress-strain curve of concrete", Cement Concrete Res., 3, 583-599. https://doi.org/10.1016/0008-8846(73)90096-3
  23. Reinhardt, H.W. and Xu, S. (2000), "A practical testing approach to determine mode II fracture energy GIIF for concrete", Int. J. Fract., 105, 107-125. https://doi.org/10.1023/A:1007649004465
  24. Rybicki, E.F. and Kanninen, M.F. (1977), "A finite element calculation of stress intensity factors by a modified crack closure integral", Eng. Fract. Mech., 9, 931-938. https://doi.org/10.1016/0013-7944(77)90013-3
  25. Sahab, M.G., Ashour, A.F. and Toropov, V.V. (2005), "Cost optimization of reinforced concrete flat slab buildings", Eng. Struct., 27, 313-322. https://doi.org/10.1016/j.engstruct.2004.10.002
  26. Sih, G.C. (1973), "Some basic problems in fracture mechanics and new concepts", Eng. Fract. Mech., 5, 365-377. https://doi.org/10.1016/0013-7944(73)90027-1
  27. Simo, J.C. and Hughes, T.J.R. (1998), Computational Inelasticity, Springer, New York, USA.
  28. Wang, T. and Hsu, T.T.C. (2001), "Nonlinear finite element analysis of concrete structures using new constitutive models", Comput. Struct., 79, 2781-2791. https://doi.org/10.1016/S0045-7949(01)00157-2
  29. Xiao, J., Li, W. and Poon, C. (2011), "Recent studies on mechanical properties of recycled aggregate concrete in China-A review", Sci. China, 55(6), 1463-1480.