Applied Microscopy

  • 제48권4호
  • /
  • Pages.117-121
  • /
  • 2018
  • /
  • 2287-5123(pISSN)
  • /
  • 2287-4445(eISSN)
한국현미경학회 (Korean Society of Microscopy)
권호 표지
DOI QR코드

DOI QR Code

A Brief Review of κ-Carbide in Fe-Mn-Al-C Model Alloys

  • Seol, Jae Bok (National Institute for Nanomaterials Technology (NINT), POSTECH)
  • 투고 : 2018.12.21
  • 심사 : 2018.12.27
  • 발행 : 2018.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The multiple length scale analysis of previously designed Fe-Mn-Al-C based low-density model alloys reveals the difference in ordered ${\kappa}-carbide$, $(Fe,Mn)_3AlC_x$, between Fe-25Mn-16Al-5.2C (at%) alloy and Fe-3Mn-10Al-1.2C (at%) alloy. For the former alloy composition consisting of fully austenite grains, ${\kappa}-carbide$ showed majorly cuboidal and minorly pancake morphology and its chemical composition was not changed through aging for 24 h and 168 h at $600^{\circ}C$. Meanwhile, for the isothermally annealed ferritic alloy system for 1 hr at 500 and $600^{\circ}C$, the dramatic change in the chemical composition of needle-shape ${\kappa}-carbide$, $(Fe,Mn)_3(Fe,Al)C_x$, was found. Here we address that the compositional fluctuations in the vicinity of the carbides are significantly controlled by abutting phase, either austenite or ferrite. Namely, the cooperative ordering of carbon and Al is an important factor contributing to carbide formation in the high-Mn and high-Al alloyed austenitic steel, while the carbon and Mn for the low-Mn and high Al alloyed ferritic steel.

키워드

참고문헌

  1. Bang C W, Seol J B, Yang Y S, and Park C G (2015) Atomically resolved cementite dissolution governed by the strain state in pearlite steel wires. Scripta Mater. 108, 151-155. https://doi.org/10.1016/j.scriptamat.2015.07.004
  2. Chao C Y, Hwang C N, and Liu T F (1993) GRAIN-BOUNDARY PRECIPITATION IN AN FE-7.8 AL-31.7 MN-0.54 C ALLOY. Scripta Metall. Mater. 28, 109-114. https://doi.org/10.1016/0956-716X(93)90546-5
  3. Choi K, Seo C H, Lee H, Kim S K, Kwak J H, Chin K G, Park K T, and Kim N J (2010) Effect of aging on the microstructure and deformation behavior of austenite base lightweight Fe-28Mn-9Al-0.8C steel. Scripta Mater. 63, 1028-1031. https://doi.org/10.1016/j.scriptamat.2010.07.036
  4. Connetable D, and Maugis P (2008) First principle calculations of the ${\kappa}$-Fe3AlC perovskite and iron-aluminium intermetallics. Intermetallics 16, 345-352. https://doi.org/10.1016/j.intermet.2007.09.011
  5. Gutierrez-Urrutia I, and Raabe D (2012) Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe-Mn-Al-C steel. Acta Mater. 60, 5791-5802. https://doi.org/10.1016/j.actamat.2012.07.018
  6. Gutierrez-Urrutia I, and Raabe D (2013) Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels. Scripta Mater. 68, 343-347. https://doi.org/10.1016/j.scriptamat.2012.08.038
  7. Noh J Y, and Kim H (2011) Density Functional Theory Calculations on ${\kappa}$-carbides, (Fe,Mn)3AlC. J. Kor. Phys. Soc. 58, 285-290. https://doi.org/10.3938/jkps.58.285
  8. Raabe D, Springer H, Gutierrez-Urrutia I, Rosters F, Bausch M, Seol J B, Koyama M, Choi P P, and Tsuzaki K (2014) Alloy Design, Combinatorial Synthesis, and Microstructure-Property Relations for Low-Density Fe-Mn-Al-C Austenitic Steels. JOM 66, 1845-1856. https://doi.org/10.1007/s11837-014-1032-x
  9. Seol J B, Jung J E, Jang Y W, and Park C G (2013) Influence of carbon content on the microstructure, martensitic transformation and mechanical properties in austenite/${\varepsilon}$-martensite dual-phase Fe-Mn-C steels. Acta Mater. 61, 558-578. https://doi.org/10.1016/j.actamat.2012.09.078
  10. Seol J B, Raabe D, Choi P, Lim Y R, and Park C G (2012) Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical properties of high-carbon bainitic-austenitic TRIP steels. Acta Mater. 60, 6183-6199. https://doi.org/10.1016/j.actamat.2012.07.064
  11. Seol J B, Raabe D, Choi P, and Park H S (2013) Direct evidence for the formation of ordered carbides in a ferrite-based low-density Fe-Mn-Al-C alloy studied by transmission electron microscopy and atom probe tomography. Scripta Mater. 68, 348-353. https://doi.org/10.1016/j.scriptamat.2012.08.013
  12. Springer H, and Raabe D (2012) Rapid alloy prototyping: Compositional and thermo-mechanical high throughput bulk combinatorial design of structural materials based on the example of 30Mn-1.2C-xAl triplex steels. Acta Mater. 60, 4950-4959. https://doi.org/10.1016/j.actamat.2012.05.017
  13. Yao M J, Dey P, Seol J B, Choi P, Herbig M, Marceau R K W, Hickel T, Neugebauer J, and Raabe D (2016) Combined atom probe tomography and density functional theory investigation of the Al offstoichiometry of ${\kappa}$-carbides in an austenitic Fe-Mn-Al-C low density steel. Acta Mater. 106, 229-238. https://doi.org/10.1016/j.actamat.2016.01.007