References
- Ahn, S., J. Choi, S. Kim, J. Lee, C. H. Choi and H. Kim. 2015. Development of an integrated engine-hydro-mechanical transmission control algorithm for a tractor. Advances in Mechanical Engineering 7(7): 1-18.
- Bilski, B. 2013. Audible and infrasonic noise levels in the cabins of modern agricultural tractors - does the risk of adverse, exposure-dependent effects still exist? International Journal of Occupational Medicine and Environmental Health 26(3): 488-493. https://doi.org/10.2478/s13382-013-0116-0
- Capalbo, S. M. and M. Denny. 1986. Testing long-run productivity models for the Canadian and U.S. agricultural sectors. American Journal of Agricultural Economics 68(3): 615-625. https://doi.org/10.2307/1241545
- Cavallo, E., E. Ferrari, L. Bollani and M. Coccia. 2014a. Strategic management implications for the adoption of technological innovations in agricultural tractor: the role of scale factors and environmental attitude. Technology Analysis & Strategic Management 26 (7): 765-779. https://doi.org/10.1080/09537325.2014.890706
- Cavallo, E., E. Ferrari, L. Bollani and M. Coccia. 2014b. Attitudes and behaviour of adopters of technological innovations in agricultural tractors: A case study in Italian agricultural system. Agricultural Systems 130:44-54. https://doi.org/10.1016/j.agsy.2014.05.012
- Chang, D. I., M. S. Kim, K. D. Kim, Y. K. Huh, S. O. Chung and B. K. Cho. 2010. Development of a 50 kW tractor for European orchards. Annual Research Report. Jeonju, Republic of Korea: Center for IT Convergence Agricultural Machinery.
- Cho, J. M. 2003. Analysis of pressure modulation control and design parameters of powershift shuttle hydraulic clutch for tractor. MS thesis. Cheonan: Korea University of Technology and Education, Department of Mechanical Engineering.
- Choi, S. H., H. J. Kim, S. H. Ahn, S. H. Hong, M. J. Chai, O. E. Kwon, S. C. Kim, Y. J. Kim, C. H. Choi and H. S. Kim. 2013. Modeling and simulation for a tractor equipped with hydro-mechanical transmission. Journal of Biosystems Engineering 38(3): 171-179. https://doi.org/10.5307/JBE.2013.38.3.171
- Chung, S. O., Y. J. Kim, M. C. Choi, K. H. Lee, J. K. Ha, T. K. Kang and Y. K. Kim. 2016. Development of a hydraulic power transmission system for the 3-point hitch of 50-kW narrow tractors. Korean Journal of Agricultural Science 43(3): 450-458. https://doi.org/10.7744/kjoas.20160048
- Guzzomi, A. and V. Rondelli. 2013. Narrow-track wheeled agricultural tractor parameter variation. Journal of Agricultural Safety and Health 19(4): 237-260.
- Harris, K. J. and J. K. Jensen. 1964. John Deere power shift transmission. SAE Technical Paper 640052.
- Ha, J. K. 2015. Development of power transmission system for orchard tractor. PhD diss. Daejeon: Chungnam National University, Department of Agricultural Machinery Engineering.
- ILO, 1987. Safety in The Working Environment. International Labour Conference, Geneva, Switzerland: ILO.
- ISO. 2015. ISO-5131: Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator's position - Survey method. Geneva, Switzerland: International Organization for Standardization.
- Jung, G. H. 2013. Gear train design of 8-speed automatic transmission for tractor. Journal of Korean Society Fluid Power Construction Equipment 10(2): 30-36 (in Korean with English abstract).
- Kabir, M. S. N. 2015. Comfort evaluation and classification of agricultural tractors considering safety factors. PhD diss. Daejeon, Republic of Korea: Chungnam National University, Department of Agricultural Machinery Engineering.
- Kabir, M. S., Ryu, M. J., Chung, S. O., Kim, Y. J., Choi, C. H., Hong, S. J and J. H. Sung. 2014. Research trends for performance, safety, and comfort evaluation of agricultural tractors: A review. Journal of Biosystems Engineering 39(1): 21-33. https://doi.org/10.5307/JBE.2014.39.1.021
- KAMICO (Korea Agricultural Machinery Industry Cooperative) and KSAM (Korean Society for Agricultural Machinery). 2016. Agricultural Machinery Yearbook Republic of Korea. Korean Society for Agricultural Machinery. Available at http://www.ksam76.or.kr.
- Kechayov, D. and A. Trifonov. 2003. Noise effect of tractor stayer 942 upon the subsidiary agricultural workers. Journal of Environmental Protection and Ecology 4(4): 831-835.
- Kim, B. G., W. O. Lee, S. Y. Shin, H. K. Kim, C. H. Kang and J. Y. Rhee. 2009. Analysis of determining factors for power size of a tractor. Journal of Biosystems Engineering 34(1): 8-14 (in Korean, with English abstract). https://doi.org/10.5307/JBE.2009.34.1.008
- Kim, H. G., Y. J. Jo, C. S. Kim, Y. H. Han and D. C. Kim. 2016. Design improvement of mechanical transmission for tracked small agricultural transporters through gear strength analysis. Journal of Biosystems Engineering 41(1): 1-11. https://doi.org/10.5307/JBE.2016.41.1.001
- Lee, K. H. 1990. Spur and helical gear design for manual transmission. Journal of the Korean Society of Automotive Engineers 12(6): 3-10 (in Korean).
- Lee, I. Y., S. N. Yun, K. U. Yang, P. Y. Huh and D. G. Lee. 1996. Performance improvement of clutch actuating hydraulic control system at semi-automatic transmission for construction vehicles. Transactions of Korea Society of Automotive Engineers 4(3): 10-21 (In Korean, with English abstract).
- Lee, P. U, S. O. Chung, C. H. Choi, Y. J. Park and Y. J. Kim. 2016. Analysis of the effects of operating point of tractor engine on fatigue life of PTO gear using simulation. Korean Journal of Agricultural Science 43(3): 441-449. https://doi.org/10.7744/kjoas.20160047
- Nelson, D. I., R. Y. Nelson, M. Concha-Barrientos and M. Fingerhut. 2005. The global burden of occupational noise-induced hearing loss. American Journal of Industrial Medicine 48(6): 446-458. https://doi.org/10.1002/ajim.20223
- OECD. 2018. OECD code 2: Standard code for the official testing of agricultural and forestry tractor performance. Parish, France: OECD. Available at www.oecd.org.
- Park, Y. J., S. C. Kim and J. G. Kim. 2016a. Analysis and verification of power transmission characteristics of the hydromechanical transmission for agricultural tractors. Journal of Mechanical Science and Technology 30 (11): 5063-5072. https://doi.org/10.1007/s12206-016-1056-y
- Park, Y. J., J. G. Kim and G. H. Lee. 2016b. Characteristic analysis of planetary gear set of hydromechanical transmission system of agricultural tractors. Journal of Biosystems Engineering 41(3): 145-152. https://doi.org/10.5307/JBE.2016.41.3.145
- Raikwar, S., V. K. Tewari, S. Mukhopadhyay, C. R. B. Verma and M. S. Rao. 2015. Simulation of components of a power shuttle transmission system for an agricultural tractor. Computers and Electronics in Agriculture 114:114-124. https://doi.org/10.1016/j.compag.2015.03.006
- SK (Statistics Korea). 2016. Agricultural area statistics in 2015. Available at http://kostat.go.kr/portal/korea/index.action.
- Yun, C. J. 1998. Analysis and control of the clutch hydraulic control system for a variable speed drive independent quality. MS thesis. Seoul: Seoul National University, Department of Mechanical Design and Production Engineering.