Structural Engineering and Mechanics

  • 제65권5호
  • /
  • Pages.611-619
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Nonlinear analysis of contemporary and historic masonry vaulted elements externally strengthened by FRP

  • Hamdy, Gehan A. (Department of Civil Engineering, Faculty of Engineering at Shoubra, Benha University) ;
  • Kamal, Osama A. (Department of Civil Engineering, Faculty of Engineering at Shoubra, Benha University) ;
  • El-Hariri, Mohamed O.R. (Department of Civil Engineering, Faculty of Engineering at Shoubra, Benha University) ;
  • El-Salakawy, Tarik S. (Department of Civil Engineering, Faculty of Engineering at Shoubra, Benha University)
  • 투고 : 2017.09.25
  • 심사 : 2018.01.03
  • 발행 : 2018.03.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper addresses numerical modeling and nonlinear analysis of unreinforced masonry walls and vaults externally strengthened using fiber reinforced polymers (FRP). The aim of the research is to provide a simple method for design of strengthening interventions for masonry arched structures while considering the nonlinear behavior. Several brick masonry walls and vaults externally strengthened by FRP which have been previously tested experimentally are modeled using finite elements. Numerical modeling and nonlinear analysis are performed using commercial software. Description of the modeling, material characterization and solution parameters are given. The obtained numerical results demonstrate that externally applied FRP strengthening increased the ultimate capacity of the walls and vaults and improved their failure mode. The numerical results are in good agreement with the experimentally obtained ultimate failure load, maximum displacement and crack pattern; which demonstrates the capability of the proposed modeling scheme to simulate efficiently the actual behavior of FRP-strengthened masonry elements. Application is made on a historic masonry dome and the numerical analysis managed to explain its structural behavior before and after strengthening. The modeling approach may thus be regarded a practical and valid tool for design of strengthening interventions for contemporary or historic unreinforced masonry elements using externally bonded FRP.

키워드

참고문헌

  1. Acito, M. and Milani, G. (2012), "Homogenization approach for the evaluation of crack patterns induced by foundation settlement on an old masonry building", Open Civil Eng. J., 6, 215-230. https://doi.org/10.2174/1874149501206010215
  2. ANSYS(R) Nonlinear Analysis Computer Program, Release 12.0 (2012), Theory Reference Manual, ANSYS Inc., Canonsburg, PA, U.S.A.
  3. Balic, I., Zivaljic, N., Smoljanovic, H. and Trogrlic, B. (2016), "Seismic resistance of dry stone arches under in-plane seismic loading", Struct. Eng. Mech., 58(2), 243-257. https://doi.org/10.12989/sem.2016.58.2.243
  4. Chacara, C., Mendes, N. and Lourenco, P.B. (2016), "Simulation of shake table tests on out-of-plane masonry buildings, part IV: Macro and micro FEM based approaches", J. Arch. Herit., 11, 103-116.
  5. Clementi, F., Gazzani, V., Poiani, M. and Lenci, S. (2016), "Assessment of seismic behavior of heritage masonry buildings using numerical modeling", J. Build. Eng., 8, 29-47. https://doi.org/10.1016/j.jobe.2016.09.005
  6. Croci, G. (1998), Conservation and Structural Restoration of Architectural Heritage, Advances in Architectures Series, Computational Mechanical Publications, Southampton, U.K.
  7. D'Ambrisi, A., Valentina, M. and Marco, M. (2012), "Seismic assessment of a historical masonry tower with nonlinear static and dynamic analyses tuned on ambient vibration test", Eng. Struct., 36, 210-219. https://doi.org/10.1016/j.engstruct.2011.12.009
  8. Da Porto, F., Guidi, G., Garbin, E. and Modena, C. (2010), "Inplane behavior of clay masonry walls: Experimental testing and finite-element modelling", J. Struct. Div., 136(11), 1379-1392. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000236
  9. Doven, M.S. and Kafkas, U. (2017), "Micro modelling of masonry walls by plane bar elements for detecting elastic behavior", Struct. Eng. Mech., 62(5), 643-649. https://doi.org/10.12989/SEM.2017.62.5.643
  10. ECP 204 (2005), Egyptian Code of Practice for Design and Construction of Masonry Structures, Ministry of Housing and Urban Communities, Cairo, Egypt.
  11. El-Salakawy, T.S. (2015), "Response of masonry structures strengthened by different techniques", Ph.D. Dissertation, Benha University, Cairo, Egypt.
  12. El-Salakawy, T.S., El-Hariri, O.R., Kamal, O.A. and Hamdy, G.A. (2014), "Experimental investigation of masonry vaults/walls strengthened using different techniques", J. Civil Eng. Technol., 5(12), 354-365.
  13. Gabor, A., Benanni, A, Jacquelin, E. and Lebon, F. (2006), "Modeling approaches of the in-plane shear behavior of unreinforced and FRP strengthened masonry panels", Compos. Struct., 74, 277-288. https://doi.org/10.1016/j.compstruct.2005.04.012
  14. Giordano, A., Mele, E. and De Luca, A. (2002), "Modeling of historical masonry structures: Comparison of different approaches through a case study", Eng. Struct., 24(8), 1057-1069. https://doi.org/10.1016/S0141-0296(02)00033-0
  15. Grande, E., Imbimbo, M. and Sacco, E. (2013), "Finite element analysis of masonry panels strengthened with FRPs", Compos. B, 71, 1296-1309.
  16. Kamal, O.A., Hamdy, G.A. and El-Salakawy, T.S. (2014), "Nonlinear analysis of historic and contemporary vaulted masonry assemblages", HBRC J., 10, 235-246. https://doi.org/10.1016/j.hbrcj.2013.11.004
  17. Karbassi, A. and Lestuzzi, P. (2012), "Fragility analysis of existing unreinforced buildings through a numerical-based methodology", Open Civil Eng. J., 6, 121-130. https://doi.org/10.2174/1874149501206010121
  18. Kaushik, H., Rai, D. and Jain, S. (2007), "Stress-strain characteristics of clay brick masonry under uniaxial compression", J. Mater. Civil Eng., 19, 728-739. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:9(728)
  19. Kheirollahi, M. (2013), "Equivalent frame model and shell element for modeling of inplane behavior of unreinforced brick masonry buildings", Struct. Eng. Mech., 46(2), 213-229. https://doi.org/10.12989/sem.2013.46.2.213
  20. Kocaturk, T. and Erdogan, Y.S. (2016), "Earthquake behavior of M1 minaret of historical Sultan Ahmed Mosque (Blue Mosque)", Struct. Eng. Mech., 59(3), 539-558. https://doi.org/10.12989/sem.2016.59.3.539
  21. Lourenco, P.B. (2002), "Computations on historic masonry structures", Prog. Struct. Eng. Mater., 4(3), 301-319. https://doi.org/10.1002/pse.120
  22. Lourenco, P.B., Milani, G., Tralli, A. and Zucchini, A. (2007), "Analysis of masonry structures: Review of and recent trends of homogenization techniques", Can. J. Civil Eng., 34, 1443-1457. https://doi.org/10.1139/L07-097
  23. Mahfouz, I. and Rizk, T. (2003), "Applications of FRP in strengthening of structures", Proceedings of the 6th International Conference on Structural Faults and Repair, London, U.K., July.
  24. Mahini, S.S. (2015), "Smeared crack material modeling for the nonlinear analysis of CFRP-strengthened historical brick vaults with adobe piers", Constr. Build. Mater., 74, 201-218. https://doi.org/10.1016/j.conbuildmat.2014.10.033
  25. Mazzotti, C. and Murgo, F.S. (2015), "Numerical and experimental study of GFRP-masonry interface behavior: Bond evolution and role of the mortar layers", Compos. B, 75, 212-225. https://doi.org/10.1016/j.compositesb.2015.01.034
  26. Mendes, N. and Lourenco, P.B. (2010), "Seismic assessment of masonry 'Gaioleiro' buildings in Lisbon, Portugal", J. Earthq. Eng., 14, 80-101.
  27. Milani, G. and Lourenco, P.B. (2013), "Simple homogenized model for the nonlinear analysis of FRP-strengthened masonry structures I: Theory", J. Eng. Mech., 139(1), 59-76. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000457
  28. Milani, G. (2011), "Simple homogenization model for the nonlinear analysis of in-plane loaded masonry walls", Compos. Struct., 89, 1586-1601. https://doi.org/10.1016/j.compstruc.2011.05.004
  29. Oliveira, D.V., Basilio, I. and Lourenco, P.B. (2010), "Experimental behavior of FRP strengthened masonry arches", J. Compos. Constr., 14 (3), 312-322. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000086
  30. Reccia, E., Cazzani, A. and Cecchi, A. (2012), "FEM-DEM modeling for out-of-plane loaded masonry panels: A limit analysis approach", Open Civil Eng. J., 6, 231-238. https://doi.org/10.2174/1874149501206010231
  31. Roca, P., Cervera, M., Gariup, G. and Pela, L. (2010), "Structural analysis of masonry historical constructions, classical and advanced approaches", Arch. Comp. Meth. Eng., 17(3), 299-325. https://doi.org/10.1007/s11831-010-9046-1
  32. Roca, P., Cervera, M., Pela, L., Clemente, R. and Chiumenti, M. (2013), "Continuum FE models for the analysis of mallorca cathedral", Eng. Struct., 46, 653-670. https://doi.org/10.1016/j.engstruct.2012.08.005
  33. Sarhosis, V, Asteris, P.G., Mohebkhah, A., Xiao, J. and Wang, T. (2016), "Three-dimensional modelling of ancient colonnade structural systems subjected to harmonic and seismic loading", Struct. Eng. Mech., 60(5), 633-653. https://doi.org/10.12989/sem.2016.60.4.633
  34. Szolomicki, J., Berkowski, P. and Baranski, J. (2015), "Computer modeling of masonry cross vaults strengthened with fiber reinforced polymer strips", Arch. Civil Mech. Eng., 15(3), 751-766. https://doi.org/10.1016/j.acme.2014.05.006
  35. Valluzzi, M.R., Valdemarca, M. and Modena, C. (2001), "Behaviour of brick masonry vaults strengthened by FRP laminates", J. Compos. Constr., 5(3), 165-169.
  36. Xin, R., Yao, J. and Zhao, Y. (2017), "Experimental research on masonry mechanics and failure under biaxial compression", Struct. Eng. Mech., 61(1), 161-169. https://doi.org/10.12989/sem.2017.61.1.161

피인용 문헌

  1. Multiscale Numerical Analysis of TRM-Reinforced Masonry under Diagonal Compression Tests vol.10, pp.11, 2018, https://doi.org/10.3390/buildings10110196