References
- Y. Kojima, 2001, "Project of Platform Science and Technology for Advanced Magnesium Alloys", Materials Transactions, Vol. 42, No. 7, pp. 1154-1159. https://doi.org/10.2320/matertrans.42.1154
- G. Lee, K. Kim and C. Kang, 2014, "Effect of heat treatment on the microstructure and damping capacity of hot rolled magnesium alloy", J. of the Korean Soci. for Power System Eng., Vol. 18, No. 4, pp. 66-71.
- K. Nishiyama, R. Matsui, Y. Ikeda, S. Niwa and T. Sakaguchi, 2003, "Damping properties of a sintered Mg-Cu-Mn alloy", J. Alloys Compd, Vol. 355, pp. 22-25. https://doi.org/10.1016/S0925-8388(03)00256-1
- H. Kageyama, M. Shimazu, S. Kamado and Y. Kojima, 1998, "Effect of alloying elements and heat treatment on damping capacity of Mg-Al alloys", J. of JILM, Vol. 48, No. 5, pp. 217-221. https://doi.org/10.2464/jilm.48.217
- D. Jang and S. Kim, 2008, "Developement Trend of Damping Mg Alloys", J. of the Korea Foundry Society, Vol. 28, No. 5, pp. 199-203.
- A. Rollett, F. J. Humphreys, G. S. Rohrer and M. Hatherly, 2004, "Recrystallization and related annealing phenomena", Pergamon, pp. 1-658.
- X. Yang, Y. ZHU, H. Miura and T. Sakai, 2010, "Static recrystallization behavior of hot-deformed magnesium alloy AZ31 during isothermal annealing", Trans. Nonferrous Met. Soc. China, Vol. 20, pp. 1269-1274. https://doi.org/10.1016/S1003-6326(09)60289-2
- A. Takayma, X. Yang, H. Miura and T. Sakai, 2008, "Continuous static recrystallization in ultrafine-grained copper processed by multidirectional forging", Mater. Sci. Eng. A, Vol. 478, pp. 221-228. https://doi.org/10.1016/j.msea.2007.05.115
- K. Sugimoto, K. Matsui, T. Okamoto and K. Kishitake, 1975, "Effect of Crystal Orientation on Amplitude - Dependent Damping in Magnesium", Trans. JIM, Vol. 16, pp. 647-655. https://doi.org/10.2320/matertrans1960.16.647
Cited by
- 뜨임한 구조용강 SCM435의 경도 및 충격 흡수에너지에 대한 신뢰성 평가 vol.22, pp.6, 2018, https://doi.org/10.21289/ksic.2019.22.6.681