DOI QR코드

DOI QR Code

Evaluation of vierendeel peripheral frame as supporting structural element for prevention of progressive collapse

  • Khaloo, Alireza (Department of Civil Engineering, Sharif University of Technology) ;
  • Omidi, Hossein (Department of Civil Engineering, Sharif University of Technology)
  • 투고 : 2017.09.30
  • 심사 : 2017.12.16
  • 발행 : 2018.03.10

초록

Progressive building collapse occurs when failure of a structural component leads to the failure and collapse of surrounding members, possibly promoting additional failure. Global system collapse will occur if the damaged system is unable to reach a new static equilibrium configuration. The most common type of primary failure which led to the progressive collapse phenomenon, is the sudden removal of a column by various factors. In this study, a method is proposed to prevent progressive collapse phenomena in structures subjected to removal of a single column. A vierendeel peripheral frame at roof level is used to redistribute the removed column's load on other columns of the structure. For analysis, quasi-static approach is used which considers various load combinations. This method, while economically affordable is easily applicable (also for new structures as well as for existing structures and without causing damage to their architectural requirements). Special emphasis is focused on the evolution of vertical displacements of column removal point. Even though additional stresses and displacements are experienced by removal of a structural load bearing column, the proposed method considerably reduces the displacement at the mentioned point and prevents the collapse of the structural frame.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation

참고문헌

  1. Arshian, A.H. and Morgenthal, G. (2017), "Three-dimensional progressive collapse analysis of reinforced concrete frame structures subjected to sequential column removal", Eng. Struct., 132, 87-97. https://doi.org/10.1016/j.engstruct.2016.11.018
  2. Cassianola, D., D'Aniello, M., Rebelo, C., Landolfo, R. and da Silva, L.S. (2016), "Influence of seismic design rules on the robustness of steel moment resisting frames", Steel Compos. Struct., Int. J., 21(3), 479-500. https://doi.org/10.12989/scs.2016.21.3.479
  3. Chen, C.H., Zhu, Y.F., Yao, Y. and Huang, Y. (2016), "Progressive collapse analysis of steel frame structure based on the energy principle", Steel Compos. Struct., Int. J., 21(3), 553-571. https://doi.org/10.12989/scs.2016.21.3.553
  4. Dusenberry, D.O. and Hamburger, R.O. (2006), "Practical means for energy-based analyses of disproportionate collapse potential", J. Perform. Construct. Facil., 20(4), 336-348. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(336)
  5. Ellingwood, B.R., Smilowitz, R., Dusenberry, D.O., Duthinh, D., Lew, H. and Carino, N. (2007), "Best practices for reducing the potential for progressive collapse in buildings", US Department of Commerce, National Institute of Standards and Technology.
  6. Ellingwood, B.R., Smilowitz, R., Dusenberry, D.O., Duthinh, D., Lew, H.S. and Carino, N.J. (2007), "Best practices for reducing the potential for progressive collapse in buildings", Gaithersburg: National Institute of Standards and Technology.
  7. Fu, F. (2010), "3-d nonlinear dynamic progressive collapse analysis of multistorey steel composite frame buildings-parametric study", Eng. Struct., 32(12), 3974-3980. https://doi.org/10.1016/j.engstruct.2010.09.008
  8. Fu, F. (2012), "Response of a multi-storey steel composite building with concentric bracing under consecutive column removal scenarios", J. Constr. Steel Res., 70, 115-126. https://doi.org/10.1016/j.jcsr.2011.10.012
  9. GSA (2003), Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects; The U.S. General Services Administration;
  10. Guneyisi, E.M., D'Aniello, M., Landolfo, R. and Mermerdas, K. (2014), "Prediction of the flexural overstrength factor for steel beams using artificial neural network", Steel Compos. Struct., Int. J., 17(3), 215-236. https://doi.org/10.12989/scs.2014.17.3.215
  11. Izzuddin, B., Vlassis, A., Elghazouli, A. and Nethercot, D. (2008), "Progressive collapse of multi-storey buildings due to sudden column loss - part i: Simplified assessment framework", Eng. Struct., 30(5), 1308-1318. https://doi.org/10.1016/j.engstruct.2007.07.011
  12. Kim, J. and Kim, T. (2009), "Assessment of progressive collapseresisting capacity of steel moment frames", Journal of Constructional Steel Research, 65(1), 169-179. https://doi.org/10.1016/j.jcsr.2008.03.020
  13. Kim, J. and Park, J. (2008), "Design of steel moment frames considering progressive collapse", Steel Compos. Struct., Int. J., 8(1), 85-98. https://doi.org/10.12989/scs.2008.8.1.085
  14. Kim, J.K., Lee, S.J. and Choi, H.H. (2010), "Progressive collapse resisting capacity of moment frames with viscous dampers", J. Computat. Struct. Eng. Inst. Korea, 23(5), 517-524.
  15. Kordbagh, B. and Mohammadi, M. (2017), "Influence of seismicity level and height of the building on progressive collapse resistance of steel frames", Struct. Des. Tall Special Build., 26(2).
  16. Liu, R., Davison, B. and Tyas, A. (2005), "A study of progressive collapse in multi-storey steel frames", Proceedings of Structures Congress 2005: Metropolis and Beyond, New York, NY, April, pp. 1-9.
  17. Nezamisavojbolaghi, K., Hosseini, M. and Shafiei, A. (2017), "Numerical Modeling of Infills in Asymmetric Steel Moment Frames for Their Dynamic Analysis with Progressive Collapse Approach", Proceedings of the 6th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Rhodes Island, Greece, June, pp. 1403-1418.
  18. Rezvani, F.H. and Asgarian, B. (2014), "Effect of seismic design level on safety against progressive collapse of concentrically braced frames", Steel Compos. Struct., Int. J., 16(2), 135-156. https://doi.org/10.12989/scs.2014.16.2.135
  19. Seethalakshmi, M.S., Prakash, M., Satyanarayanan, K.S. and Thamilarasu, V. (2016), "Effect of Masonry Infill Structure with Openings during Progressive Collapse by Removing a Middle Column", Ind. J. Sci. Technol., 9(23).
  20. Tavakoli, H.R. and Kiakojouri, F. (2013), "Influence of sudden column loss on dynamic response of steel moment frames under blast loading", Int. J. Eng. Transact. B: Appl., 26(2), 197-206.
  21. Tavakoli, H.R. and Kiakojouri, F. (2013), "Numerical study of progressive collapse in framed structures: A new approach for dynamic column removal", Int. J. Eng., Transact. A: Basics, 26(7), 685-692.
  22. Tsai, M.H. (2017), "An Approximate Analytical Formulation for the Rise-Time Effect on Dynamic Structural Response Under Column Loss", Int. J. Struct. Stabil. Dyn, 1850038.
  23. Usmani, A.S., Chung, Y.C. and Torero, J.L. (2003), "How did the WTC towers collapse: a new theory", Fire Safe. J., 38(6), 501-533. https://doi.org/10.1016/S0379-7112(03)00069-9
  24. Unified Facilities Criteria (UFC)-DoD. (2005), Design of Buildings to Resist Progressive Collapse; Department of Defense.
  25. Wang, T., Chen, Q., Zhao, H. and Zhang, L. (2016) "Experimental study on progressive collapse performance of frame with specially shaped columns subjected to middle column removal", Shock Vib., 13 p. DOI: 10.1155/2016/7956189
  26. Wickersheimer, D.J. (1976), "The Vierendeel", J. Soc. Architect. Hist., 35(1), 54-60. https://doi.org/10.2307/988971