Geomechanics and Engineering

  • 제16권6호
  • /
  • Pages.655-667
  • /
  • 2018
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Probabilistic stability analysis of rock slopes with cracks

  • Zhu, J.Q. (Department of Civil and Architecture Engineering, Changzhou Institute of Technology) ;
  • Yang, X.L. (School of Civil Engineering, Central South University)
  • 투고 : 2018.04.28
  • 심사 : 2018.11.10
  • 발행 : 2018.12.30
⟨ 이전 논문 다음 논문 ⟩

초록

To evaluate the stability of a rock slope with one pre-exiting vertical crack, this paper performs corresponding probabilistic stability analysis. The existence of cracks is generally ignored in traditional deterministic stability analysis. However, they are widely found in either cohesive soil or rock slopes. The influence of one pre-exiting vertical crack on a rock slope is considered in this study. The safety factor, which is usually adopted to quantity the stability of slopes, is derived through the deterministic computation based on the strength reduction technique. The generalized Hoek-Brown (HB) failure criterion is adopted to characterize the failure of rock masses. Considering high nonlinearity of the limit state function as using nonlinear HB criterion, the multivariate adaptive regression splines (MARS) is used to accurately approximate the implicit limit state function of a rock slope. Then the MARS is integrated with Monte Carlo simulation to implement reliability analysis, and the influences of distribution types, level of uncertainty, and constants on the probability density functions and failure probability are discussed. It is found that distribution types of random variables have little influence on reliability results. The reliability results are affected by a combination of the uncertainty level and the constants. Finally, a reliability-based design figure is provided to evaluate the safety factor of a slope required for a target failure probability.

키워드

참고문헌

  1. Adoko, A.C., Jiao, Y.Y., Wu, L., Wang, H. and Wang, Z.H. (2013), "Predicting tunnel convergence using multivariate adaptive regression spline and artificial neural network", Tunn. Undergr. Sp. Technol., 38(3), 368-376. https://doi.org/10.1016/j.tust.2013.07.023
  2. Chen, X.W. and Dai, W. (2011), "Maximum entropy principle for uncertain variables", Int. J. Fuzzy Syst., 13(3), 232-236.
  3. Douglas, K.J. (2002), "The shear strength of rock masses", Ph.D. Dissertation, The University of New South Wales, Sydney, Australia.
  4. Hoek, E. (1998), "Reliability of Hoek-Brown estimates of rock mass properties and their impact on design", Int. J. Rock Mech. Min. Sci., 35(1), 63-68. https://doi.org/10.1016/S0148-9062(97)00314-8
  5. Hoek, E., Carranza-Torres, C. and Corkum, B. (2002), "Hoek-Brown failure criterion-2002 Edition", Proceedings of the NARMS-TAC Conference, Toronto, Canada, July.
  6. Jiang, S.H., Li, D.Q., Zhang, L.M. and Zhou, C.B. (2014), "Slope reliability analysis considering spatially variable shear strength parameters using a non-intrusive stochastic finite element method", Eng. Geol., 168(1), 120-128. https://doi.org/10.1016/j.enggeo.2013.11.006
  7. Li, A.J., Cassidy, M.J., Wang, Y., Merifield, R.S. and Lyamin, A.V. (2012), "Parametric Monte Carlo studies of rock slopes based on the Hoek-Brown failure criterion", Comput. Geotech., 45, 11-18. https://doi.org/10.1016/j.compgeo.2012.05.010
  8. Li, A.J., Merifield, R.S. and Lyamin, A.V. (2008), "Stability charts for rock slopes based on the Hoek-Brown failure criterion", Int. J. Rock Mech. Min. Sci., 45(5), 689-700. https://doi.org/10.1016/j.ijrmms.2007.08.010
  9. Li, D.Q., Zheng, D., Cao, Z.J., Tang, X.S. and Phoon, K.K. (2016), "Response surface methods for slope reliability analysis: Review and comparison", Eng. Geol., 203, 3-14. https://doi.org/10.1016/j.enggeo.2015.09.003
  10. Li, L. and Chu, X. (2015), "Multiple response surfaces for slope reliability analysis", Int. J. Numer. Anal. Meth. Geomech., 39(2), 175-192. https://doi.org/10.1002/nag.2304
  11. Li, T.Z. and Yang, X.L. (2018a), "Probabilistic stability analysis of subway tunnels combining multiple failure mechanisms and response surface method", Int. J. Geomech., 18(12), 04018167. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001315
  12. Li, Y.X. and Yang, X.L. (2018b), "Three-dimensional seismic displacement analysis of rock slopes based on Hoek-Brown failure criterion", KSCE J. Civ. Eng., 22(11), 4334-4344. https://doi.org/10.1007/s12205-018-3022-y
  13. Li, Z.W. and Yang, X.L. (2018c), "Active earth pressure for soils with tension cracks under steady unsaturated flow conditions", Can. Geotech. J., 55(12), 1850-1859. https://doi.org/10.1139/cgj-2017-0713
  14. Li, Z.W. and Yang, X.L. (2018d), "Stability of 3D slope under steady unsaturated flow condition", Eng. Geol., 242, 150-159. https://doi.org/10.1016/j.enggeo.2018.06.004
  15. Liu, L.L. and Cheng, Y.M. (2016), "Efficient system reliability analysis of soil slopes using multivariate adaptive regression splines-based Monte Carlo simulation", Comput. Geotech., 79, 41-54. https://doi.org/10.1016/j.compgeo.2016.05.001
  16. Michalowski, R.L. (2013), "Stability assessment of slopes with cracks using limit analysis", Can. Geotech. J., 50(10), 1011-1021. https://doi.org/10.1139/cgj-2012-0448
  17. Pan, Q.J. and Dias, D. (2018), "Probabilistic analysis of a rock tunnel face using polynomial chaos expansion method", Int. J. Geomech., 18(4), 04018013. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001116
  18. Utili, S. (2013), "Investigation by limit analysis on the stability of slopes with cracks", Geotechnique, 63(2), 140-154. https://doi.org/10.1680/geot.11.P.068
  19. Xu, B. and Low, B.K. (2006), "Probabilistic stability analyses of embankments based on finite-element method", J. Geotech. Geoenviron. Eng., 132(11), 1444-1454. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:11(1444)
  20. Xu, J.S. and Yang, X.L. (2018), "Three-dimensional stability analysis of slope in unsaturated soils considering strength nonlinearity under water drawdown", Eng. Geol., 237, 102-115. https://doi.org/10.1016/j.enggeo.2018.02.010
  21. Yang, X.L. and Li, Z.W. (2018a), "Factor of safety of threedimensional stepped slopes", Int. J. Geomech., 18(6), 04018036. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001154
  22. Yang, X.L. and Li, Z.W. (2018b), "Kinematical analysis of 3D passive earth pressure with nonlinear yield criterion", Int. J. Numer. Anal. Meth. Geomech., 42(7), 916-930. https://doi.org/10.1002/nag.2771
  23. Yang, X.L. and Li, Z.W. (2018c), "Upper bound analysis of 3D static and seismic active earth pressure", Soil Dyn. Earthq. Eng., 108, 18-28. https://doi.org/10.1016/j.soildyn.2018.02.006
  24. Yang, X.L. and Liu, Z.A. (2018), "Reliability analysis of threedimensional rock slop", Geomech. Eng., 15(6), 1183-1191. https://doi.org/10.12989/gae.2018.15.6.1183
  25. Yang, X.L. and Zhang, S. (2018), "Risk assessment model of tunnel water inrush based on improved attribute mathematical theory", J. Central South Univ., 25(2), 379-391. https://doi.org/10.1007/s11771-018-3744-5
  26. Yang, X.L., Zhou, T. and Li, W.T. (2018), "Reliability analysis of tunnel roof in layered Hoek-Brown rock masses", Comput. Geotech., 104, 302-309. https://doi.org/10.1016/j.compgeo.2017.12.007
  27. Zhang, J., Zhang, L.M. and Tang, W.H. (2011), "New methods for system reliability analysis of soil slopes", Can. Geotech. J., 48(7), 1138-1148. https://doi.org/10.1139/t11-009
  28. Zhang, W.G. and Goh, A.T.C. (2013), "Multivariate adaptive regression splines for analysis of geotechnical engineering systems", Comput. Geotech., 48(3), 82-95. https://doi.org/10.1016/j.compgeo.2012.09.016

피인용 문헌

  1. 3D Rotational Failure Mechanism of Tunnel Face in Weathered and Saturated Hoek-Brown Rock Masses vol.23, pp.6, 2019, https://doi.org/10.1007/s12205-019-1048-4
  2. Optimal design of shape of a working in cracked rock mass vol.24, pp.3, 2021, https://doi.org/10.12989/gae.2021.24.3.227
  3. Discontinuous rock slope stability analysis by limit equilibrium approaches - a review vol.14, pp.12, 2018, https://doi.org/10.1080/17538947.2021.1988163