DOI QR코드

DOI QR Code

U-플랜지 트러스 보의 구조 내력에 관한 실험 연구

Experimental Study on the Structural Capacity of the U-Flanged Truss Steel Beam

  • 오명호 (국립목포대학교 건축공학과) ;
  • 김영호 (엔테이지) ;
  • 강재윤 (한국건설기술연구원 인프라안전연구본부) ;
  • 김명한 (국립목포대학교 건축공학과)
  • Oh, Myoung Ho (Dept. of Architectural Engineering, Mokpo National Univ.) ;
  • Kim, Young Ho (NTAGE) ;
  • Kang, Jae Yoon (Dept. of Infrastructure Safety Research, Korea Institute of Civil Engineering and Building Technology) ;
  • Kim, Myeong Han (Dept. of Architectural Engineering, Mokpo National Univ.)
  • 투고 : 2018.11.20
  • 심사 : 2018.12.11
  • 발행 : 2018.12.15

초록

U-flanged truss beam is composed of u-shaped upper steel flange, lower steel plate of 8mm or more thickness, and connecting lattice bars. Upper flange and lower plate are connected by the diagonal lattice bars welded on the upper and lower sides. In this study the structural experiments on the U-flanged truss beams with various shapes of upper flange were performed, and the flexural and shear capacities of U-flanged truss beam in the construction stage were evaluated. The principal test parameters were the shape of upper flange and the alignment space of diagonal lattice bars. In all the test specimens, the peak loads were determined by the buckling of lattice bar regardless of the upper flange shape. The test results have shown that the buckling of lattice bar is very important design factor and there is no need to reinforce the basic u-shaped upper flange. However, the early lattice buckling occurred in the truss beam with upper steel bars because of the insufficient strength and stiffness of upper chord, and the reinforcement in the upper chord is necessary. The formulae of Eurocode 3 (2005) have presented more exact evaluations of lattice buckling load than those of KBC 2016.

키워드

참고문헌

  1. Chae, H. S., Ryoo, J., Chung, K. S., Moon, Y. M., & Cho, S. M., "Experimental Study on Structural Performance of Endreinforced Steel-beam system(Eco-girder)", Journal of Korean Society of Steel Construction, Vol.22, No.6, pp.533-541, 2010
  2. Heo, B. W., Bae, K. W., & Moon, T. S., "Flexural Capacity of the Encased(Slim Floor) Composite Beam with Deep Deck Plate", Journal of Korean Society of Steel Construction, Vol.16, No.2, pp.235-245, 2004
  3. Kim, D. B., Kim, Y. H., Oh, M. H., & Kim, M. H., "Experimental Study on the Flexural Capacity of the Concrete-Filled Composite Beam with Exposed Top Flange", Journal of the Korean Society of Hazard Mitigation, Vol.17, No.4, pp.1-9, 2017
  4. Lee, M. H., Oh, M. H., Kim, Y. H., Jeong, S. C., & Kim, M. H., "Experimental Study on the Shear Capacity of Slim AU Composite Beam", Journal of Korean Association for Spatial Structures, Vol.17, No.3, pp.99-105, 2017 https://doi.org/10.9712/KASS.2017.17.3.099
  5. Park, K. S., Heo, B. W., Kwak, M. G., & Bae, K. W., "Experimental Study of the Flexural Behavior of Encased Composite Beams for Residential Buildings", Journal of the Architectural Institute of Korea Structure & Construction, Vol.24, No.12, pp.91-98, 2008
  6. Trentadue, F., Quaranta, G., Marano, G. C., & Monti, G., "Simplified Lateral-Torsional Buckling Analysis in Special Truss-Reinforced Composite Steel-Concrete Beams", Journal of Structural Engineering, Vol.137, No.12, pp.1419-1427, 2011 https://doi.org/10.1061/(ASCE)ST.1943-541X.0000390
  7. MOLIT, "Korea Building Code", Ministry of Land, Infrastructure and Transport, 2016.
  8. BS EN 1993-1-1:2005: Eurocode 3, "Design of steel structures. Part 1-1 : General rules and rules for buildings", British Standards(BS), 2005.