Structural Engineering and Mechanics

  • 제65권4호
  • /
  • Pages.381-388
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Vibration analysis of a Timoshenko beam carrying 3D tip mass by using differential transform method

  • Kati, Hilal Doganay (Department of Mechanical Engineering, Bursa Technical University) ;
  • Gokdag, Hakan (Department of Mechanical Engineering, Bursa Technical University)
  • 투고 : 2017.03.01
  • 심사 : 2017.11.27
  • 발행 : 2018.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Dynamic behaviour of beam carrying masses has attracted attention of many researchers and engineers. Many studies on the analytical solution of beam with concentric tip mass have been published. However, there are limited works on vibration analysis of beam with an eccentric three dimensional object. In this case, bending and torsional deformations of beam are coupled due to the boundary conditions. Analytical solution of equations of motion of the system is complicated and lengthy. Therefore, in this study, Differential Transform Method (DTM) is applied to solve the relevant equations. First, the Timoshenko beam with 3D tip attachment whose centre of gravity is not coincident with beam end point is considered. The beam is assumed to undergo bending in two orthogonal planes and torsional deformation about beam axis. Using Hamilton's principle the equations of motion of the system along with the possible boundary conditions are derived. Later DTM is applied to obtain natural frequencies and mode shapes of the system. According to the relevant literature DTM has not been applied to such a system so far. Moreover, the problem is modelled by Ansys, the well-known finite element method, and impact test is applied to extract experimental modal data. Comparing DTM results with finite element and experimental results it is concluded that the proposed approach produces accurate results.

키워드

참고문헌

  1. Abramovich, H. and Hamburger, O. (1991), "Vibration of a cantilever Timoshenko beam with a tip mass", J. Sound Vibr., 148(1), 162-170. https://doi.org/10.1016/0022-460X(91)90828-8
  2. Arikoglu, A. and Ozkol, I. (2006), "Solution of difference equations by using differential transform method", Appl. Math. Comput., 174, 1216-1228.
  3. Auciello, N.M. (1996), "Transverse vibrations of a linearly tapered cantilever beam with tip mass of rotatory inertia and eccentricity", J. Sound Vibr., 194(1), 25-34. https://doi.org/10.1006/jsvi.1996.0341
  4. Balkaya, M., Kaya, M.O. and Saglamer, A. (2009), "Analysis of the vibration of an elastic beam supported on elastic soil using the differential transform method", Arch. Appl. Mech., 79, 135-146. https://doi.org/10.1007/s00419-008-0214-9
  5. Catal, S. (2008), "Solution of free vibration equations of beam on elastic soil by using differential transform method", Appl. Math. Modell., 32, 1744-1757. https://doi.org/10.1016/j.apm.2007.06.010
  6. Chen, C.K. and Ho, S.H. (1998), "Analysis of general elastically end restrained non-uniform beams using differential transform", Appl. Math. Modell., 22, 219-234. https://doi.org/10.1016/S0307-904X(98)10002-1
  7. Ebrahimi, F. and Mokhdari, M. (2015), "Transverse vibration analysis of rotating porous beam with functionally graded microstructure using the differential transform method", J. Braz. Soc. Mech. Sci. Eng., 37, 1435-1444. https://doi.org/10.1007/s40430-014-0255-7
  8. Esmailzadeh, E. and Nakhaie-Jazar, G. (1998), "Periodic behavior of a cantilever beam with end mass subjected to harmonic base excitation", J. Non-Lin. Mech., 33(4), 567-577. https://doi.org/10.1016/S0020-7462(97)00038-3
  9. Gokdag, H. and Kopmaz, O. (2005), "Coupled bending and torsional vibration of a beam with inspan and tip attachments", J. Sound Vibr., 287, 591-610. https://doi.org/10.1016/j.jsv.2004.11.019
  10. He, J. and Fu, Z.F. (2001), Modal Analysis, Butterworth-Heinemann, Oxford.
  11. Ho, S.H. and Chen, C.K. (2006), "Free transverse vibration of an axially loaded non-uniform spinning twisted Timoshenko beam using differential transform", J. Mech. Sci., 48, 1323-1331. https://doi.org/10.1016/j.ijmecsci.2006.05.002
  12. Hwang, I., Li, J. and Du, D. (2009), "Differential transformation and its application to nonlinear optimal control", J. Dyn. Syst. Measure. Contr., 131, 051010-1-051010-11. https://doi.org/10.1115/1.3155013
  13. Joshi, A. (1995), "Constant Frequency solutions of a uniform cantilever beam with variable tip mass and corrector spring", J. Sound Vibr., 179(1), 165-169. https://doi.org/10.1006/jsvi.1995.0010
  14. Kaya, M.O. and Ozdemir Ozgumus, O. (2007), "Flexural-torsional-coupled vibration analysis of axially loaded closed-section composite Timoshenko beam by using DTM", J. Sound Vibr., 306, 495-506. https://doi.org/10.1016/j.jsv.2007.05.049
  15. Kirk, C.L. and Wiedemann, S.M. (2002), "Natural frequencies and mode shapes of a free-free beam with large end masses", J. Sound Vibr., 254(5), 939-949. https://doi.org/10.1006/jsvi.2001.4138
  16. Liu, B., Zhou, X. and Du, Q. (2015), "Differential transform method for some delay differential equations", Appl. Math., 6, 585-593. https://doi.org/10.4236/am.2015.63053
  17. Liu, Z., Yin, Y., Wang, F., Zhao, Y. and Cai, L. (2013) "Study on modified differential transform method for free vibration analysis of uniform Euler-Bernoulli beam", Struct. Eng. Mech., 48(5), 697-709. https://doi.org/10.12989/sem.2013.48.5.697
  18. Matt, C.F. (2013), "Simulation of the transverse vibrations of a cantilever beam with an eccentric tip mass in the axial direction using integral transforms", Appl. Math. Modell., 37, 9338-9354. https://doi.org/10.1016/j.apm.2013.04.038
  19. Oguamanam, D.C.D. (2003), "Free vibration of beams with finite mass rigid tip load and flexural-torsional coupling", J. Mech. Sci., 45, 963-979. https://doi.org/10.1016/j.ijmecsci.2003.09.014
  20. Oguamanam, D.C.D. and Arshad, M. (2005), "On the natural frequencies of a flexible manipulator with a tip load", Proceedings of the Institution of Mechanical Engineers, 219, 1199-1205.
  21. Pukhov, G.E. (1981), "Expansion formulas for differential transforms", Cybern. Syst. Analy., 17, 460.
  22. Pukhov, G.E. (1982), "Differential transforms and circuit theory", J. Circ. Theor. App., 10, 265. https://doi.org/10.1002/cta.4490100307
  23. Rajasekaran, S. and Tochaei, E.N. (2014), "Free vibration analysis of axially functionally graded tapered Timoshenko beams using differential transformation element method and differential quadrature element method of lowest order", Meccan., 49, 995-1009. https://doi.org/10.1007/s11012-013-9847-z
  24. Salarieh, H. and Ghorashi, M. (2006), "Free vibration of Timoshenko beam with finite mass rigid tip load and flexural torsional coupling", J. Mech. Sci., 48, 763-779. https://doi.org/10.1016/j.ijmecsci.2006.01.008
  25. Salehi, P., Yagoobi, H. and Torabi, M. (2012), "Application of the differential transformation method and variation iteration method to large deformation of cantilever beams under point load", J. Mech. Sci. Technol., 26(9), 2879-2887. https://doi.org/10.1007/s12206-012-0730-y
  26. Vakil, M., Sharbati, E., Vakil, A., Heidari, F. and Fotouhi, R. (2013), "Vibration analysis of a Timoshenko beam on a moving base", J. Vibr. Contr., 21(6), 1068-1085. https://doi.org/10.1177/1077546313492808
  27. Yesilce, Y. (2010), "Differential transform method for free vibration analysis of a moving beam", Struct. Eng. Mech., 35(5), 645-658. https://doi.org/10.12989/sem.2010.35.5.645
  28. Zhou, J.K. (1986), Differential Transformation and Its Applications for Electrical Circuits, Huazhong University Press, Wuhan, China.

피인용 문헌

  1. Damage detection using both energy and displacement damage index on the ASCE benchmark problem vol.77, pp.2, 2018, https://doi.org/10.12989/sem.2021.77.2.151