Computers and Concrete

  • 제21권2호
  • /
  • Pages.157-166
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and analytical study on flexural behaviour of fly ash and paper sludge ash based geopolymer concrete

  • Senthamilselvi, P. (Department of Civil Engineering, Government College of Engineering) ;
  • Palanisamy, T. (Department of Civil Engineering, KSR College of Engineering)
  • 투고 : 2017.07.11
  • 심사 : 2017.09.11
  • 발행 : 2018.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

This article presents the flexural behaviour of reinforced fly ash (FA)-based geopolymer concrete (GPC) beams with partial replacement of FA for about 10% by weight with paper sludge ash (PSA). The beams were made of M35 grade concrete and cured under three curing conditions for comparison viz., ambient curing, external exposure curing, and oven curing at $60^{\circ}C$. The beams were experimentally tested at the 28th day of casting after curing by conducting two-point loading flexural test. Performance aspects such as load carrying capacity, first crack load, load-deflection and moment-curvature behaviours of both types of beams were experimentally studied and their results were compared under different curing conditions. To verify the response of reinforced GPC beams numerically, an ANSYS 13.0 finite element program was also used. The result shows that there is a good agreement between computer model failure behaviour with the experimental failure behaviour.

키워드

참고문헌

  1. Ambily, P.S., Madheswaran, C.K., Sharmila, S. and Muthiah, S. (2011), "Experimental and analytical investigations on shear behaviour of reinforced geopolymer concrete beams", Int. J. Civil Struct. Eng., 2(2), 673.
  2. Anuradha, R., Sreevidya, V. and Venkatasubramani, R. (2012), "Geopolymer reinforced concrete beams made with and without sand", J. Struct. Eng., 39(2), 254-262.
  3. Battaglia, A., Calace, N., Nardi, E., Petronio, B.M. and Pietroletti, M. (2003), "Paper mill sludge-soil mixture: kinetic and thermodynamic tests of cadmium and lead sorption capability", Microchem. J., 75(2), 97-102. https://doi.org/10.1016/S0026-265X(03)00074-2
  4. BIS 383 (1970), Specifications for Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standards, New Delhi, India.
  5. Dattatreya, J.K., Rajamane, N.P., Sabitha, D., Ambily, P.S. and Nataraja, M.C. (2011), "Flexural behaviour of reinforced geopolymer concrete beams", Int. J. Civil Struct. Eng., 2(1), 138-159.
  6. Davidovits, J. (1994), "Global warming impact on the cement and aggregates industries", World Res. Rev., 6(2), 263-278.
  7. Davidovits, J. (2005), "The polysialate terminology: a very useful and simple model for the promotion and understanding of green-chemistry", Geopolymer, Green Chemistry and Sustainable Development Solutions: Proceedings of the World Congress Geopolymer, Geopolymer Institute, Saint-Quentin, France, July.
  8. Fanning, P. (2001), "Nonlinear models of reinforced and posttensioned concrete beams", Electron. J. Struct. Eng., 2(1), 122-132.
  9. Fernandez-Jimenez, A., García-Lodeiro, I. and Palomo, A. (2015), "Development of new cementitious materials by alkaline activating industrial by-products", Second International Conference on Innovative Materials, Structures and Technologies, IOP Conference Series: Materials Science and Engineering, Riga, Latvia, October.
  10. Geng, X., Deng, J. and Zhang, S.Y. (2006), "Effects of hot pressing parameters and wax content on the properties of binderless fiberboard made from paper mill sludge", J. Wood Fiber Sci., 38(4), 736-741.
  11. Hardjito, D. and Rangan, B.V. (2005), "Development and properties of low-calcium fly ash-based geopolymer concrete", Research Report GC1; Faculty of Engineering, Curtin University of Technology, Perth, Australia.
  12. Hardjito, D., Wallah, S., Sumajouw, D. and Rangan, B. (2004), "Properties of geopolymer concrete with fly ash as source material: effect of mixture composition", The 7th CANMET/ACI International Conference on Recent Advance in Concrete Technology, Las Vegas, USA, May.
  13. IS 10262 (2009), Guidelines for Concrete Mix Design Proportioning, Bureau of Indian Standards, New Delhi, India.
  14. IS 456 (2000), Plain and Reinforced Concrete-Code of Practice, Bureau of Indian Standards, New Delhi, India.
  15. IS: 516 (1959) Methods of Tests for Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
  16. Jindal, B., Singhal, D., Sharma, S.K., Ashish, D. and Parveen, K. (2017), "Improving compressive strength of low calcium fly ash geopolymer concrete with alccofine", Adv. Concrete Constr., 5(1), 17-29. https://doi.org/10.12989/acc.2017.5.1.17
  17. Kachlakev, D., Miller, T., Yim, S., Chansawat, K. and Potisuk, T. (2001), "Finite element modeling of reinforced concrete structures strengthened with FRP laminates", Report for Oregon Departmentof Transportation, Salem, USA, May.
  18. Kannapiran, K., Sujatha, T. and Nagan, S. (2013), "Comparative study on the flexural behaviour of reinforced cement concrete and reinforced geopolymer concrete beams", J. Struct. Eng., 39(5), 598-604.
  19. Khale, D. and Chaudhary, R. (2007), "Mechanism of geopolymerization and factors influencing its development: a review", J. Mater. Sci., 42, 729-746. https://doi.org/10.1007/s10853-006-0401-4
  20. Madheswaran, C.K., Ambily, P.S., Lakshmanan, N., Dattatreya, J.K. and Sathik, J.K. (2014), "Shear behavior of reinforced geopolymer concrete thin-webbed T-beams", ACI Mater. J., 111(1), 89-98.
  21. Manjunath, G.S., Radhakrishna, C. and Giridhar, M.J. (2011), "Compressive strength development in ambient cured geopolymer mortar", Int. J. Earthq. Sci. Eng., 4(10), 830-834.
  22. Mun, S.P. and Ahn, B.J. (2001), "Chemical conversion of paper sludge incineration ash into synthetic zeolite", J. Ind. Eng. Chem., 7(5), 292-298.
  23. Nguyen, K.T., Namshik, A., Le, T.A. and Lee, K. (2016), "Theoretical and experimental study on mechanical properties and flexural strength of fly ash-geopolymer concrete", Constr. Build. Mater., 106(3), 65-77. https://doi.org/10.1016/j.conbuildmat.2015.12.033
  24. Parveen, S.D. (2017), "Development of mix design method for geopolymer concrete", Adv. Concrete Constr., 5(4), 377-390. https://doi.org/10.12989/ACC.2017.5.4.377
  25. Pires, E.F.C., Silva, F.J., Pereira, R.A. and Darwish, F.A.I. (2014), "Fracture toughness of geopolymer concrete for precasting RC beams", 15th NOCMAT 2014, Pirassununga SP, Brazil BioSMat., November.
  26. Puertas, F., Martinez-Ramirez, S., Alonso, S. and Vazquez, T. (2000), "Alkali-activated fly ash/slag cement strength behaviour and hydration products", Cement Concrete Res., 30(10), 1625-1632. https://doi.org/10.1016/S0008-8846(00)00298-2
  27. Ridzuan, A.R.M., Khairulniza, A.A. and Fadhil, M.A. (2013), "The evaluation of high calcium green polymeric concrete", Adv. Mater. Res., 626(4), 776-780.
  28. Santhakumar, R., Dhanaraj, R. and Chandrasekaran, E. (2007), "Behaviour of retrofitted reinforced concrete beams under combined bending and torsion: A numerical study", Electron. J. Struct. Eng., 7(7), 34-45.
  29. Shi, C., Krivenko, P.V. and Roy, D. (2006) Alkali-Activated Cements and Concrete, Taylor and Francis, Oxford, London, New York.
  30. Silverstrim, T., Martin, J. and Rostami, H. (1999), "Geopolymeric fly ash cement", Proceeding of Geopolymere'99, Saint-Quentine, France, June.
  31. Silverstrim, T., Rostami, H., Clark, B. and Martin, J. (1997), "Microstructure and properties of chemically activated fly ash concrete", Proceedings of the 19th International Conference on Cement Microscopy, International Cement Microscopy Association, Cincinnati, OH, Washington, April.
  32. Temuujin, J., Williams, R.P. and Riessen, A. (2009), "Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature", J. Mater. Proc. Technol., 209(12), 5276-5280. https://doi.org/10.1016/j.jmatprotec.2009.03.016
  33. Wallah, S.E. and Rangan, B.V. (2006), "Low-calcium fly ashbased geopolymer concrete: long-term properties", Research Report GC 2, Curtin University of Technology, Perth, Australia.