DOI QR코드

DOI QR Code

A simple test method to assess slump flow and stability of self-compacting concrete

  • Bouziani, Tayeb (Structures Rehabilitation and Materials Laboratory, University Amar Telidji-Laghouat)
  • 투고 : 2017.03.30
  • 심사 : 2017.07.28
  • 발행 : 2018.02.25

초록

Establishment of test methods to assess the fresh properties of self-compacting concrete (SCC) are required to ensure the homogeneity in fresh and hardened states. This paper discusses the suitability of a simple test method for assessing the slump flow and stability of SCC by testing on self-compacting mortar (SCM) fraction. The proposed test method aims at investigating slump flow diameter test and sieve stability test of SCC by testing SCM fraction with a plunger penetration apparatus. A central composite modeling design was performed to evaluate the effects of water/cement ratio (W/C), superplasticizer dosage (SP) and powder marble content (MP) on slump flow diameter, stability and plunger penetration test of fresh SCC. The responses of the derived statistical models are slump flow (Sf), sieve stability (S) and plunger penetration (P). Relationships obtained in this study show acceptable correlations between plunger penetration test value and slump flow diameter test results and stability. It should note that the developed relationships are very useful to predict slump flow diameter and stability of studied SCC mixtures by carrying out a simple plunger penetration test on its mortar, which can save labour and time in laboratory experiments.

키워드

참고문헌

  1. AFGC (2008), Recommendations for Use of Self-Compacting Concrete, Scientific and Technical Documents, Association Francaise de Genie Civil, France.
  2. Assaad, J.J. (2016), "Correlating thixotropy of self-consolidating concrete to stability, formwork pressure, and multilayer casting", J. Mater. Civil Eng., 28(10), 04016107. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001624
  3. Boukhelkhal, D., Boukendakdji, O., Kenai, S. and Bachene, S. (2015), "Effect of mineral admixture type on stability and rheological properties of self-compacting concrete", Rencontres Universitaires de Genie Civil, Bayonne, France, May.
  4. Bouziani, T., Benmounah, A. and Bederina, M. (2012), "Statistical modelling for effect of mix-parameters on properties of highflowing sand-concrete", J. Cent. South Univ., 19(10), 2966-2975. https://doi.org/10.1007/s11771-012-1365-y
  5. Carro-Lopez, D., Gonzalez-Fonteboa, B., De Brito, J., Martinez-Abella, F., Gonzalez-Taboada, I. and Silva, P. (2015), "Study of the rheology of self-compacting concrete with fine recycled concrete aggregates", Constr. Build. Mater., 96, 491-501. https://doi.org/10.1016/j.conbuildmat.2015.08.091
  6. Cussigh, F., Sonebi, M. and De Schutter, G. (2003), "Project testing SCC-segregation test methods", Proceedings of the 3rd International SyMPosium on Self-CoMPacting Concrete, Reykjavik, Iceland, August.
  7. De Schutter, G. (2005), "Guidelines for testing fresh selfcompacting concrete", Project Report from European Project Measurement of Properties of Fresh Self-CoMPacting Concrete.
  8. Esmaeilkhanian, B., Khayat, K.H., Yahia, A. and Feys, D. (2014), "Effects of mix design parameters and rheological properties on dynamic stability of self-consolidating concrete", Cement Concrete CoMPos., 54, 21-28. https://doi.org/10.1016/j.cemconcomp.2014.03.001
  9. Ghoddousi, P., Javid, A.A.S. and Sobhani, J. (2014), "Effects of particle packing density on the stability and rheology of selfconsolidating concrete containing mineral admixtures", Constr. Build. Mater., 53, 102-109. https://doi.org/10.1016/j.conbuildmat.2013.11.076
  10. Khayat, K.H., Ghezal, A. and Hadriche, M.S. (2000), "Utility of statistical models in proportioning self-consolidating concrete", Mater. Struct., 33(5), 338-344. https://doi.org/10.1007/BF02479705
  11. Kordts, S. and Breit, W. (2003), "Controlling the workability properties of self-compacting concrete used as ready-mixed concrete", Proceedings of the 3rd International SyMPosium on Self-CoMPacting Concrete, Reykjavik, Iceland, August.
  12. Mesbah, H.A., Yahia, A. and Khayat, K.H. (2011), "Electrical conductivity method to assess static stability of selfconsolidating concrete", Cement Concrete Res., 41(5), 451-458. https://doi.org/10.1016/j.cemconres.2011.01.004
  13. NF EN 413-2 (2006), Masonry Cement-Part 2: Test Methods, AFNOR Association of Standardization.
  14. Nunes, S., Figueiras, H., Milheiro Oliveira, P., Coutinho, J.S. and Figueiras, J. (2006), "A methodology to assess robustness of SCC mixtures", Cement Concrete Res., 36(12), 2115-2122. https://doi.org/10.1016/j.cemconres.2006.10.003
  15. Okamura, H. and Ouchi, M. (2003), "Self-compacting concrete", J. Adv. Concrete Tech., 1(1), 5-15. https://doi.org/10.3151/jact.1.5
  16. Ouchi, M. and Edamatsu, Y. (1999), "A simple evaluation method for interaction between coarse aggregate and mortar particles in self-compacting concrete", Proceedings of the 1st International RILEM SyMPosium on Self-CoMPacting Concrete, Stockholm, Sweden, September.
  17. Perrot, A. and Rangeard, D. (2017), "Effects of mix design parameters on consolidation behaviour of fresh cement-based materials", Mater. Struct., 50(2), 117. https://doi.org/10.1617/s11527-016-0988-0
  18. Shen, L., Jovein, H.B., Sun, Z., Wang, Q. and Li, W. (2015), "Testing dynamic segregation of self-consolidating concrete". Constr. Build. Mater., 75, 465-471. https://doi.org/10.1016/j.conbuildmat.2014.11.010
  19. Shi, C., Wu, Z., Lv, K. and Wu, L. (2015), "A review on mixture design methods for self-compacting concrete", Constr. Build. Mater., 84, 387-398. https://doi.org/10.1016/j.conbuildmat.2015.03.079
  20. Sonebi, M. (2001), "Factorial design modelling of mix proportion parameters of underwater composite cement grouts", Cement Concrete Res., 31(11), 1553-1560. https://doi.org/10.1016/S0008-8846(01)00583-X