DOI QR코드

DOI QR Code

Multiple criteria decision making method for selecting of sealing element for earth dams considering long and short terms goals

  • Rashidi, Babak (Department of Civil Engineering, Karaj Branch, Islamic Azad University) ;
  • Shirangi, Ehsan (Department of Civil Engineering, Karaj Branch, Islamic Azad University) ;
  • Baymaninezhad, Matin (Department of Civil Engineering, Karaj Branch, Islamic Azad University)
  • 투고 : 2017.09.30
  • 심사 : 2018.01.18
  • 발행 : 2018.02.25

초록

Nowadays, using math logic in great civil projects is considered by the clients to achieve the goals of project including quality optimization, costs, avoiding individual, emotional and political decision making, long-term and short-term goals and they are the main requirements of each project and should be considered by the decision makers to avoid the illogical decision making applied on the majority of civil projects and this imposes great financial and spiritual costs on our country. The present study attempts to present one of the civil projects (Ghasre Shirin storage dam) whose client was not ministry of energy for the first time and the short-term and long-term goals of the private sector were applied based on the triangle of quality, cost and time. Also, the math logic and model (multi-criteria decision making method and decision making matrix) is used in one of the most important sections of project, sealing element, policies and new materials (Geosynthetics) are considered and this leads to suitable decision making in this regard. It is worth to mention that this method is used for other sections of a dam including body, water diversion system, diaphragm and other sectors or in other civil projects of building, road construction, etc.

키워드

참고문헌

  1. Akpinar, U., Binici, B. and Arici, Y. (2014), "Earthquake stresses and effective damping in concrete gravity dams", Eartq. Struct., 6(3), 251-266. https://doi.org/10.12989/eas.2014.6.3.251
  2. Amiri, M. (2016), Multi-criteria decision making, Academic publication of Kian.
  3. Castelli, F., Lentini, V. and Trifaro, C.A. (2017), "1D Seismic analysis of earth dams: The example of the lentini site", Proced. Eng., 158, 356-361.
  4. Drochytka, R. and Magdaléna, K. (2017), "Options for the remediation of embankment dams using suitable types of alternative raw materials", Constr. Build. Mater., 143, 649-658. https://doi.org/10.1016/j.conbuildmat.2017.02.089
  5. Elcik, H. and Cakmakci, M. (2017), "Harvesting of microalgae via submerged membranes: flux, fouling and its reversibility", Membr. Water Treat., 8(5), 499-515. https://doi.org/10.12989/MWT.2017.8.5.499
  6. Haciefendioglu, K. (2006), "Transient stochastic analysis of nonlinear response of earth and rock-fill dams to spatially varying ground motion", Struct. Eng. Mech., 22(6), 647-664. https://doi.org/10.12989/sem.2006.22.6.647
  7. Khodaverd, A. (2007), Geosynthetics and their application in civil and environmental projects, Fadak publications. Isatis.
  8. Mirzaei, Z., Akbarpour, A., Khatibinia, M. and Khashei Siuki, A. (2015), "Optimal design of homogeneous earth dams by particle swarm optimization incorporating support vector machine approach", Geomech. Eng., 9(6), 709-727. https://doi.org/10.12989/gae.2015.9.6.709
  9. Opricovic, S. and Tzeng, G.H. (2004), "The compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS", Eur. J. Operat. Res., 156(2), 445-455. https://doi.org/10.1016/S0377-2217(03)00020-1
  10. Rajnish, K. (2014), "Selection of material for optimal design using multi criteria decision making (ELSEVIER)", 3rd Int. Conf. Mat. Proc. Charac.
  11. Rodriguez, R.F., Nicieza, C.G., Gayarre, F.L. and Ramos Lopez, F.L. (2015), "Application of hydraulic cylinder testing to determine the geotechnical properties of earth-filled dams", Geomech. Eng., 9(4), 483-498. https://doi.org/10.12989/gae.2015.9.4.483
  12. Vafafyian, M. (2012), "Earth dams", Jihad Daneshgahi Pub. Indus. Unit Isfahan, 23, 12-44.
  13. Zamani Nouri, A. and Heydari, M.M. (2017), "Performance and flow field assessment of settling tanks using experimental and CFD modeling", Membr. Water Treat., 8(5), 423-435. https://doi.org/10.12989/MWT.2017.8.5.423