Smart Structures and Systems

  • 제21권2호
  • /
  • Pages.207-223
  • /
  • 2018
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Vibration control of offshore wind turbine using RSM and PSO-optimized Stockbridge damper under the earthquakes

  • Islam, Mohammad S. (Civil and Environmental Engineering, Kunsan National University) ;
  • Do, Jeongyun (Industry-University Cooperation Foundation, Kunsan National University) ;
  • Kim, Dookie (Civil and Environmental Engineering, Kunsan National University)
  • 투고 : 2017.06.05
  • 심사 : 2018.01.19
  • 발행 : 2018.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this inquisition, a passive damper namely Stockbridge Damper (SBD) has been introduced to the field of vibration control of Offshore Wind Turbine (OWT) to reduce the earthquake excitations. The dynamic responses of the structure have been analyzed for three recorded earthquakes and the responses have been assessed. To find an optimum SBD, the parameters of damper have been optimized using Response Surface Methodology (RSM) based on Box-Behnken Design (BBD) and Particle Swarm Optimization (PSO). The influence of the design variables of SBD such as the diameter of messenger cable, the length of messenger cable and logarithmic decrement of the damping has been investigated through response variables such as maximum displacement, RMS displacement and frequency amplitude of structure under an artificially generated white noise. After that, the structure with optimized and non-optimized damper has been analyzed with under the same earthquakes. Moreover, the comparative results show that the structure with optimized damper is 11.78%, 18.71%, 11.6% and 7.77%, 7.01%, 10.23% more effective than the structure with non-optimized damper with respect to the displacement and frequency response under the earthquakes. The results show that the SBD can obviously affect the characteristics of the vibration of the OWT and RSM based on BBD and PSO approach can provide an optimum damper.

키워드

과제정보

연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning (KETEP), National Research Foundation of Korea (NRF)

참고문헌

  1. Alkmim, M.H., De Morais, M.V.G. and Fabro, A.T. (2016), "Vibration reduction of wind turbines using tuned liquid column damper using stochastic analysis", J. Phys. Conference Series, 744(1), 012178.
  2. Barry, O.R. (2014), "Vibration modeling and analysis of a single conductor with Stockbridge dampers", Ph.D. Dissertation, University of Toronto, Canada.
  3. Barbieri, N. and Barbieri, R. (2012), "Dynamic analysis of Stockbridge damper", Adv. Acoust. Vib., 2012, Article ID: 659398.
  4. Bezerra, M.A., Santelli, R.E., Oliveira, E.P., Villar, L.S. and Escaleira, L.A. (2008), "Response surface methodology (RSM) as a tool for optimization in analytical chemistry", Talanta, 76(5), 965-977. https://doi.org/10.1016/j.talanta.2008.05.019
  5. Box, G.E. and Behnken, D.W. (1960), "Some new three level designs for the study of quantitative variables", Technometrics, 2(4), 455-475. https://doi.org/10.1080/00401706.1960.10489912
  6. Brodersen, M.L. and Hogsberg, J. (2014), "Damping of offshore wind turbine tower vibrations by a stroke amplifying brace", Energy Procedia, 53(2014), 258-267. https://doi.org/10.1016/j.egypro.2014.07.235
  7. Cao, G., Ren, N., Wang, A., Lee, D.J., Guo, W., Liu, B., Feng, Y. and Zhao, Q. (2009), "Acid hydrolysis of corn stover for biohydrogen production using Thermoanaerobacterium thermosaccharolyticum W16", Int. J. Hydrogen Energ., 34(17), 7182-7188. https://doi.org/10.1016/j.ijhydene.2009.07.009
  8. Chang, S., Sun, W., Cho, S.G. and Kim, D. (2016), "Vibration Control of Nuclear Power Plant Piping System Using Stockbridge Damper under Earthquakes", Sci. Technol. Nuclear Install., 2016, Article ID. 5014093.
  9. Chen, J., Peng, W., Ge, R. and Wei, J. (2009), "Optimal design of composite laminates for minimizing delamination stresses by particle swarm optimization combined with FEM", Struct. Eng. Mech., 31(4), 407-421. https://doi.org/10.12989/sem.2009.31.4.407
  10. Den Hartog, J.P. (1947), Mechanical vibrations, McGraw-Hill, New York.
  11. Derringer, G. and Suich, R. (1980), "Simultaneous optimization of several response variables", J. Qual. Technol., 12(4), 214-219. https://doi.org/10.1080/00224065.1980.11980968
  12. Dos Santos, J.M.M. (2015), "Modelling and analysis of wind-excited vibrations of transmission lines", Ph.D. Dissertation, University of Porto.
  13. Ferreira, S.C., Bruns, R.E., Ferreira, H.S., Matos, G.D., David, J. M., Brandao, G.C. and Dos Santos, W.N.L. (2007), "Box-Behnken design: an alternative for the optimization of analytical methods", Analytica Chimica Acta, 597(2), 179-186. https://doi.org/10.1016/j.aca.2007.07.011
  14. Jaksic, V., Wright, C.S., Murphy, J., Afeef, C., Ali, S.F., Mandic, D.P. and Pakrashi, V. (2015), "Dynamic response mitigation of floating wind turbine platforms using tuned liquid column dampers", Phil. T. R. Soc. A., 373 (2035).
  15. Jeon, S.H., Seo, M.W., Cho, Y.U., Park, W.G. and Jeong, W.B. (2013), "Sloshing characteristics of an annular cylindrical tuned liquid damper for spar-type floating offshore wind turbine", Struct. Eng. Mech., 47(3), 331-343. https://doi.org/10.12989/sem.2013.47.3.331
  16. Kasap, H. (2012), "Investigation of Stockbridge dampers for vibration control of overhead transmission lines", Ph.D. Dissertation, Middle East Technical University.
  17. Khan, A., Do, J. and Kim, D. (2016), "Cost effective optimal mix proportioning of high strength self-compacting concrete using response surface methodology", Comput. Concrete, 17(5), 629-638. https://doi.org/10.12989/cac.2016.17.5.629
  18. Lee, G.N., Kim, D.H. and Lee, Y.J. (2015), "Dynamic reliability analysis of offshore wind turbine support structure under earthquake", Proceedings of the 2015 World Congress on Advances in Civil, Environmental, and Materials Research (ACEM15), Incheon, South Korea, August.
  19. Leung, A.Y., Zhang, H., Cheng, C.C. and Lee, Y.Y. (2008), "Particle swarm optimization of TMD by non-stationary base excitation during earthquake", Earthq. Eng. Struct. D., 37(9), 1223-1246. https://doi.org/10.1002/eqe.811
  20. Leung, A.Y.T. and Zhang, H. (2009), "Particle swarm optimization of tuned mass dampers", Eng. Struct., 31(3), 715-728. https://doi.org/10.1016/j.engstruct.2008.11.017
  21. Mason, L.R., Gunst, R.F. and Hess, J.S. (1989), "Statistical design & analysis of experiments, Wiley, New York.
  22. Montgomery, D.C. (2005), Design and analysis of experiments, (6th Ed.), John Wiley & Sons Inc, New York.
  23. Mousavi, S.A., Zahrai, S.M. and Bargi, K. (2012), "Optimum geometry of tuned liquid column-gas damper for control of offshore jacket platform vibrations under seismic excitation", Earthq. Eng. Eng. Vib., 11 (4), 579-592. https://doi.org/10.1007/s11803-012-0143-z
  24. Myers, R.H., Montgomery, D.C. and Anderson-Cook, C.M. (2016), Response Surface Methodology: process and product optimization using designed experiments, John Wiley & Sons.
  25. Navarro Canales, C., Lara Lopez, A., Colin Venegas, J., Razo-Garcia, J. and Aguilera-Cortes, L.A. (2008), "Optimal design of Stockbridge dampers", Ingenieria Mecanica, Tecnologia Y desarrollo, 2(6), 193-199.
  26. Rahman, M.S, Islam, M.S., Do, J. and Kim, D. (2017), "Response surface methodology based multi-objective optimization of tuned mass damper for jacket supported offshore wind turbine", Struct. Eng. Mech., 63(3), 303-315. https://doi.org/10.12989/SEM.2017.63.3.303
  27. Roderick, C. (2012), "Vibration reduction of offshore wind turbines using tuned liquid column dampers", Master Thesis, University of Massachusetts Amherst, United State.
  28. Sepehri, A., Daneshmand, F. and Jafarpur. K. (2012), "A modified particle swarm approach for multi-objective optimization of laminated composite structures", Struct. Eng. Mech., 42(3), 335-352. https://doi.org/10.12989/sem.2012.42.3.335
  29. Shariatmadar, H. and Razavi, H. (2014), "Seismic control response of structures using an ATMD with fuzzy logic controller and PSO method", Struct. Eng. Mech., 51(4), 547-564. https://doi.org/10.12989/sem.2014.51.4.547
  30. Song, H., Damiani, R., Robertson, A. and Jonkman, J. (2013), "A new structural-dynamics module for offshore multimember substructures within the wind turbine computer-aided engineering tool FAST", Proceedings of the 23rd International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers, Anchorage, Alaska, June.
  31. Soto-Perez, L., Lopez, V. and Hwang, S.S. (2015), "Response Surface Methodology to optimize the cement paste mix design: Time-dependent contribution of fly ash and nano-iron oxide as admixtures", Mater. Des., 86, 22-29. https://doi.org/10.1016/j.matdes.2015.07.049
  32. Stockbridge, G.H. (1925), "Vibration damper," Patent No. 1675391, USA Patent Office.
  33. Tang, H., Zhang, W., Xie, L. and Xue, S. (2013), "Multi-stage approach for structural damage identification using particle swarm optimization", Smart Struct.Syst., 11(1), 69-86. https://doi.org/10.12989/sss.2013.11.1.069
  34. Urushadze, S., Pirner, M., Pospisil, S. and Kral, R. (2012), "Experimental and numerical verification of vortex-induced vibration of hangers on the footbridge", Proceedings of the 18th International Conference of Engineering Mechanics, Svratka, Czech Republic, May.
  35. Vorpahl, F., Popko, W. and Kaufer, D. (2011), "Description of a basic model of the UpWind reference jacket" for code comparison in the OC4 project under IEA Wind Annex XXX", Fraunhofer Institute for Wind Energy and Energy System Technology (IWES), Bremerhaven, Germany.
  36. Wagner, H., Ramamurti, V., Sastry, R.V.R. and Hartmann, K. (1973), "Dynamics of Stockbridge dampers", J. Sound Vib., 30(2), 207-220. https://doi.org/10.1016/S0022-460X(73)80114-2
  37. Wang, S.Q. and Li, N. (2013), "Semi-active vibration control for offshore platforms based on LQG method", J Mar. Sci. Technol., 21 (5), 562-568.