Coupled systems mechanics

  • 제7권2호
  • /
  • Pages.177-195
  • /
  • 2018
  • /
  • 2234-2184(pISSN)
  • /
  • 2234-2192(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Influence of ductility classes on seismic response of reinforced concrete structures

  • Nikolic, Zeljana (University of Split, Faculty of Civil Engineering, Architecture and Geodesy) ;
  • Zivaljica, Nikolina (University of Split, Faculty of Civil Engineering, Architecture and Geodesy) ;
  • Smoljanovic, Hrvoje (University of Split, Faculty of Civil Engineering, Architecture and Geodesy)
  • 투고 : 2017.06.29
  • 심사 : 2017.08.17
  • 발행 : 2018.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Reinforced concrete buildings in a seismically active area can be designed as DCM (medium ductility) or DCH (high ductility) class according to the regulations of Eurocode 8. In this paper, two RC buildings, one with a wall structural system and the other with a frame system, previously designed for DCM and DCH ductility, were analysed by using incremental dynamic analysis in order to study differences in the behaviour of structures between these ductility classes, especially the failure mechanism and ultimate collapse acceleration. Despite the fact that a higher behaviour factor of DCH structures influences lower seismic resistance, in comparison to DCM structures, a strict application of the design and detailing rules of Eurocode 8 in analysed examples caused that the seismic resistance of both frames does not significantly differ. The conclusions were derived for two buildings and do not necessarily apply to other RC structures. Further analysis could make a valuable contribution to the analysis of the behaviour of such buildings and decide between two ductility classes in everyday building design.

키워드

과제정보

연구 과제번호 : Development of numerical models for reinforced-concrete and stone masonry structures under seismic loading based on discrete cracks

연구 과제 주관 기관 : Croatian Science Foundation

참고문헌

  1. Armero, F. and Garikipati, K. (1996), "An analysis of strong discontinuities in multiplicative finite strain plasticity and their relation with the numerical simulation of strain localization in solids", J. Sol. Struct., 33, 2863-2885. https://doi.org/10.1016/0020-7683(95)00257-X
  2. Armero, F. and Linder, C. (2009), "Numerical simulation of dynamic fracture using finite elements with embedded discontinuities", J. Fract., 160, 119-141. https://doi.org/10.1007/s10704-009-9413-9
  3. Bazant, Z.P., Caner, F., Adley, M. and Akers, S. (2000), "Fracturing rate effect and creep in microplane model for dynamics", J. Eng. Mech., 126(9), 962-970. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:9(962)
  4. Boot, E. (2014), Earthquake Design Practice for Buildings, 3rd Edition, Thomas Telford Limited, London, U.K.
  5. Cusatis, G., Bazant, Z.P. and Cedolin, L. (2006), "Confinement-shear lattice CSL model for fracture propagation in concrete", Comput. Meth. Appl. Mech. Eng., 195(52), 7154-7171. https://doi.org/10.1016/j.cma.2005.04.019
  6. D'Addetta, G.A., Kuhl, E., Kun, F. and Ramm, E. (1999), "Micromechanical modelling of concrete cracking", Proceedings of the European Conference on Computational Mechanics, Munich, Germany.
  7. Dominguez, N. and Perez-Mota, J. (2014), "Coupling of nonlinear models for steel-concrete interaction in structural RC joints", Coupled Syst. Mech., 3(2), 195-211. https://doi.org/10.12989/csm.2014.3.2.195
  8. Eurocode 8 (2005), Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, EN 1998-1, CEN, Brussels.
  9. European Strong-Motion Database, .
  10. Ghaboussi, J. (1997), "Fully deformable discrete element analysis using a finite element approach", J. Comput. Geotech., 5,175-195.
  11. Hordijk, D.A. (1992), "Tensile and tensile fatigue behaviour of concrete-experiments, modelling and analyses", Heron, 37(1), 3-79.
  12. Ibrahimbegovic, A., Boulkertous, A., Davenne, L. and Brancherie, D. (2010), "Modelling of reinforcedconcrete structures providing crack-spacing based on X-FEM, ED-FEM and novel operator split solution procedure", J. Numer. Meth. Eng., 83, 452-481.
  13. Iervolino, I., Maddaloni, G. and Cosenza, E. (2008), "Eurocode 8 compliant real record sets for seismic analysis of structures", J. Earthq. Eng., 12, 54-90. https://doi.org/10.1080/13632460701457173
  14. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  15. Moes, N., Dolbow, J. and Belytschko, T. (1999), "A finite element method for crack growth without remeshing", J. Numer. Meth. Eng., 46, 131-150. https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J
  16. Munjiza, A. (2004), The Combined Finite-Discrete Element Method, John Wiley & Sons, London, U.K.
  17. Nam Do, X., Ibrahimbegovic, A. and Brancherie, D. (2015a), "Combined hardening and localized failure with softening plasticity in dynamics", Coupled Syst. Mech., 4(2), 115-136. https://doi.org/10.12989/csm.2015.4.2.115
  18. Nam Do, X., Ibrahimbegovic, A. and Brancherie, D. (2015b), "Localized failure in damage dynamics", Coupled Syst. Mech., 4(3), 211-235. https://doi.org/10.12989/csm.2015.4.3.211
  19. Nikolic, M. and Ibrahimbegovic, A. (2015), "Rock mechanics model capable of representing initial heterogeneities and full set of 3D failure mechanisms", Comput. Meth. Appl. Mech. Eng., 290, 209-227. https://doi.org/10.1016/j.cma.2015.02.024
  20. Nikolic, M., Ibrahimbegovic, A. and Miscevic, P. (2015), "Brittle and ductile failure of rocks: Embedded discontinuity approach for representing mode I and mode II failure mechanisms", J. Numer. Meth. Eng., 102(8), 1507-1526. https://doi.org/10.1002/nme.4866
  21. Nikolic, M., Ibrahimbegovic, A. and Miscevic, P. (2016), "Discrete element model for the analysis of fluidsaturated fractured poro-plastic medium based on sharp crack representation with embedded strong discontinuities", Comput. Meth. Appl. Mech. Eng., 298, 407-427. https://doi.org/10.1016/j.cma.2015.10.009
  22. Nikolic, M., Karavelic, E., Ibrahimbegovic, A. and Miscevic, P. (2017a), "Lattice element models and their peculiarities", Archiv. Comput. Meth. Eng.
  23. Nikolic, Z., Zivaljic, N., Smoljanovic, H. and Balic, I. (2017b), "Numerical modelling of reinforced-concrete structures under seismic loading based on the finite element method with discrete inter-element cracks", Earthq. Eng. Struct. Dyn., 46(1), 159-178. https://doi.org/10.1002/eqe.2780
  24. Ortiz, M. and Pandolfi, A. (1999), "Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis", J. Numer. Meth. Eng., 44, 1267-1282. https://doi.org/10.1002/(SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7
  25. Ortiz, M. and Quigley, J.J. (1991), "Adaptive mesh refinement in strain localization problem", Comput. Meth. Appl. Mech. Eng., 90, 781-804. https://doi.org/10.1016/0045-7825(91)90184-8
  26. Ozbolt, J., Li, Y. and Kozar, I. (2001), "Microplane model for concrete with relaxed kinematic constraint", J. Sol. Struct., 38(16), 2683-2711. https://doi.org/10.1016/S0020-7683(00)00177-3
  27. Pearce, C.J., Thavalingam, A., Liao, Z. and Bicanic, N. (2000), "Computational aspects of the discontinuous deformation analysis framework for modelling concrete fracture", Eng. Fract. Mech., 65, 283-298. https://doi.org/10.1016/S0013-7944(99)00121-6
  28. Pramanik, D., Banerjee, A.K. and Roy, R. (2016), "Implications of bi-directional interaction on seismic fragilities of structures", Coupled Syst. Mech., 5(2), 101-126. https://doi.org/10.12989/csm.2016.5.2.101
  29. Reinhardt, H.V. (1984), "Fracture mechanics of an elastic softening material like concrete", Heron, 29(2), 3-41.
  30. Rethore, J., Gravouil, A. and Combescure, A. (2005), "An energy-conserving scheme for dynamic crack growth using the eXtended finite element method", J. Numer. Meth. Eng., 63(5), 631-659. https://doi.org/10.1002/nme.1283
  31. Schlangen, E. and Garboczi, E.J. (1997), "Fracture simulation of concrete using lattice models: computational aspects", Eng. Fract. Mech., 57(2/3), 319-332. https://doi.org/10.1016/S0013-7944(97)00010-6
  32. SeismoStruct, A Computer Program for Static and Dynamic Nonlinear Analysis of Framed Structures, .
  33. Simo, J.C., Oliver, J. and Armero, F. (1993), "An analysis of strong discontinuities induced by strainsoftening in rate-independent inelastic solids", Comput. Mech., 12, 277-296. https://doi.org/10.1007/BF00372173
  34. Soltani, M. and Maekawa, K. (2008), "Path-dependent mechanical model for deformed reinforcing bars at RC interface under coupled cyclic shear and pullout tension", Eng. Struct., 30, 1079-1091. https://doi.org/10.1016/j.engstruct.2007.06.013
  35. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31, 491-514. https://doi.org/10.1002/eqe.141
  36. Wells, G.N., Sluys, L.J. and Borst, R. (2002), "Simulating the propagation of displacement discontinuities in a regularized strain-softening medium", J. Numer. Meth. Eng., 53, 1235-1256. https://doi.org/10.1002/nme.375
  37. Yamamoto, Y., Nakamura, H., Kuroda, I. and Furuya, N. (2014), "Crack propagation analysis of reinforced concrete wall under cyclic loading using RBSM", Eur. J. Environ. Civil Eng., 18(7), 780-792. https://doi.org/10.1080/19648189.2014.881755
  38. Zivaljic, N., Nikolic, Z. and Smoljanovic, H. (2014), "Computational aspects of the combined finite-discrete element method in modelling of plane reinforced concrete structures", Eng. Fract. Mech., 131, 669-686. https://doi.org/10.1016/j.engfracmech.2014.10.017
  39. Zivaljic, N., Smoljanovic, H. and Nikolic, Z. (2012), "Sensitivity analysis of numerical parameters in FEM/DEM model for RC structures", J. Eng. Modell., 25(1-4), 7-17.
  40. Zivaljic, N., Smoljanovic, H. and Nikolic, Z. (2013), "A combined finite-discrete element model for RC structures under dynamic loading", Eng. Comput., 30, 982-1010. https://doi.org/10.1108/EC-03-2012-0066

피인용 문헌

  1. Review of Resilience-Based Design vol.9, pp.2, 2020, https://doi.org/10.12989/csm.2020.9.2.091