Structural Engineering and Mechanics

  • 제65권2호
  • /
  • Pages.155-162
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

On strain measurement of smart GFRP bars with built-in fiber Bragg grating sensor

  • Ju, Minkwan (Department of Civil and Environmental Engineering, Yonsei University) ;
  • Park, Kyoungsoo (Department of Civil and Environmental Engineering, Yonsei University) ;
  • Moon, Doyoung (Department of Civil Engineering, Kyungsung University) ;
  • Park, Cheolwoo (Department of Civil Engineering, Kangwon National University) ;
  • Sim, Jongsung (Department of Civil and Environmental Engineering, Hanyang University)
  • 투고 : 2017.12.15
  • 심사 : 2017.12.18
  • 발행 : 2018.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

A smart glass fiber reinforced polymer (SMFRP) reinforcing bar with a fiber Bragg grating (FBG) sensor was fabricated using a pultrusion technique, while ribs were formed to improve bonding between concrete and SMFRP. Then, strain of SMFRP bars were measured for a uniaxial tension test of an SMFRP bar, and a four-point bending test of concrete beams reinforced with SMFRP bars. The results of a uniaxial tension test illustrate that the strain obtained from an FBG sensor agrees well with that obtained from electrical resistance strain gauge (ERSG). Additionally, concrete beams reinforced with SMFRP bars were fabricated, and actual flexural test were performed while the strain of with an FBG sensor was compared with that of ERSG. The experimental results demonstrate that SMFRP bars can be used as reinforcement of concrete member while providing deformation information. Furthermore, SMFRP bars may provide stronger durability and smart monitoring to reinforced concrete members under corrosive environments during a service life.

키워드

과제정보

연구 과제 주관 기관 : Korea Agency for Infrastructure Technology Advancement(KAIA), National Research Foundation of Korea (NRF)

참고문헌

  1. Abdul-Salam, B., Farghaly, A.S. and Benmokrane, B. (2016), "Mechanisms of shear resistance of one-way concrete slabs reinforced with FRP bars", Constr. Build. Mater., 127, 959-970. https://doi.org/10.1016/j.conbuildmat.2016.10.015
  2. ACI Committee 440 (2015), Guide for the Design and Construction of Concrete Reinforced with FRP Bars (ACI 440.1R-15), American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  3. ACI Committee 440 (2004), Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures (ACI 440.3R-04), American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  4. Ali, A.H., Mohamed, H.M. and Benmokrane, B. (2013), "Shear resistance of circular concrete members reinforced with FRP bars: code predictions and numerical analysis", Proceedings of the CSCE Annual Conference on Canadian Society for Civil Engineering (CSCE), Montreal, Canada.
  5. Ali, A.H., Mohamed, H.M. and Benmokrane, B. (2016), "Strength and behavior of circular FRP reinforced concrete sections without web reinforcement in shear", J. Struct. Eng., 143(3).
  6. Bai, Y.L., Dai, J.G. and Teng, J.G. (2017), "Buckling of steel reinforcing bars in FRP-confined RC columns: An experimental study", Constr. Build. Mater., 140, 403-415. https://doi.org/10.1016/j.conbuildmat.2017.02.149
  7. Benmokrane, B., Debaiky, A., El-Ragaby, A., Roy, R., El-Gamal, S. and El-Salakawy, E. (2006), "Laboratory and field performance of FOS sensors in static and dynamic strain monitoring in concrete bridge decks", Proceedings of SPIE 2006-Nondestructive Evaluation and Health Monitoring of Aerospace Materials, Composites, and Civil Infrastructure, San Diego, California, U.S.A.
  8. CAN/CSA S806-12 (2012), Design and Construction of Building Structures with Fibre-Reinforced Polymers, Canadian Standards Association/National Standard of Canada, Ontario, Canada.
  9. Chung, W. and Kang, D. (2008), "Full-scale test of a concrete box girder using FBG sensing system", Eng. Struct., 30(3), 643-652. https://doi.org/10.1016/j.engstruct.2007.05.003
  10. Dawood, T.A., Shenoi, R.A. and Sahin, M. (2007), "A procedure to embed fibre Bragg grating strain sensors into GFRP sandwich structures", Compos. Part A: Appl. Sci. Manufact., 38, 217-226. https://doi.org/10.1016/j.compositesa.2006.01.028
  11. De Baere, I., Luychx, G., Voet, E., Van Paepegem, W. and Degrieck, J. (2009), "On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions", Opt. Las. Eng., 47(3-4), 403-411. https://doi.org/10.1016/j.optlaseng.2008.01.001
  12. Edwards, A.T. (2000), "Comparison of strain gage and fiber optic sensors on a sting balance in a supersonic wind tunnel", M.Sc. Dissertation, Virginia Polytechnic Institute and State University, Virginai, U.S.A.
  13. Goldston, M., Remennikov, A. and Neaz Sheikh, M. (2016), "Experimental investigation of the behavior of concrete beams reinforced with GFRP bars under static and impact loading", Eng. Struct., 113, 220-232. https://doi.org/10.1016/j.engstruct.2016.01.044
  14. Huang, J. and Newhook, J. (2008), "Structural monitoring system for assessing the long-term behavior of the confederation bridge", Proceedings of the International Conference of Structures Congress, Crossing Borders, Vancouver, Canada.
  15. Huang, M., Zhou, Z., Huang, Y. and Ou, J. (2013), "A distributed self-sensing FRP anchor rod with built-in optical fiber sensor", Measure., 46, 1363-1370.
  16. Jensen, A.E., Havsgard, G.B., Pran, K., Wang, G., Vohra, S.T., Davis, M.A. and Dandrige, A. (2000), "Wet deck slamming experiments with a FRP sandwich panel using a network of 16 fibre optic Bragg grating strain sensors", Compos. Part B: Eng., 31, 187-198. https://doi.org/10.1016/S1359-8368(00)00004-4
  17. Ju, M. and Oh, H. (2015), "Experimental assessment on the flexural bonding performance of concrete beam with GFRP reinforcing bar under repeated loading", J. Polym. Sci., 11.
  18. Ju, M., Oh, H., Lim, J. and Sim, J. (2016), "A modified model for deflection calculation of reinforced concrete beam with deformed GFRP rebar", J. Polym. Sci., 10.
  19. Kara, I.F. (2008), "Flexural performance of FRP-reinforced concrete encased steel composite beams", Struct. Eng. Mech., 59(4), 775-793. https://doi.org/10.12989/SEM.2016.59.4.775
  20. Kalamkarov, A., Macdonald, D.O., Fitzgerald, S.B. and Georgiades, A.V. (2000), "Reliability assessment of pultruded FRP reinforcements with embedded fiber optic sensors", Compos. Struct., 50, 69-78. https://doi.org/10.1016/S0263-8223(00)00081-7
  21. Kalamkarov, A., Saha, G., Rokkam, S., Newhook, J. and Georgiades, A. (2005), "Strain and deformation monitoring in infrastructure using embedded smart FRP reinforcements", Compos. Part B: Eng., 36, 455-465. https://doi.org/10.1016/j.compositesb.2004.12.003
  22. Lau, K.T., Chan, C.C., Zhou, L.M. and Jin, W. (2001), "Strain monitoring in composite-strengthened concrete structures using optical fibre sensors", Compos. Part B: Eng., 32, 33-45. https://doi.org/10.1016/S1359-8368(00)00044-5
  23. Li, D., Zhou, Z. and Ou, J. (2011), "Development and sensing properties study of FRP-FBG smart stay cable for bridge health monitoring applications", Measure., 44, 722-729.
  24. Li, D., Zhou, Z. and Ou, J. (2012), "Dynamic behavior monitoring and damage evaluation for arch bridge suspender using GFRP optical fiber Bragg grating sensors", Opt. Las. Technol., 44(4), 1031-1038. https://doi.org/10.1016/j.optlastec.2011.10.014
  25. Li, H.C.H., Herszberg, I., Davis, C.E., Mouritz, A.P. and Galea, S.C. (2006), "Health monitoring of marine composite structural joints using fibre optic sensors", Compos. Struct., 75, 321-327. https://doi.org/10.1016/j.compstruct.2006.04.054
  26. Lu, S. and Xie, H. (2007), "Strengthen and real-time monitoring of RC beam using intelligent CFRP with embedded FBG sensors", Constr. Build. Mater., 21(9), 1839-1845. https://doi.org/10.1016/j.conbuildmat.2006.05.062
  27. Mao, J., Xu, F., Gao, Q., Liu, S., Jin, W. and Xu, Y. (2016), "A monitoring method based on FBG for concrete corrosion cracking", Sens., 16, 1093. https://doi.org/10.3390/s16071093
  28. Maranan, G., Manalo, A.C., Benmokrane, B., Karunasena, W. and Mendis P. (2015), "Evaluation of the flexural strength and serviceability of geopolymer concrete beams reinforced with glass-fibre-reinforced polymer (GFRP) bars", Eng. Struct., 101, 529-541. https://doi.org/10.1016/j.engstruct.2015.08.003
  29. Thomas, J. and Ramadass, S. (2015), "Design for shear strength of concrete beams longitudinally reinforced with GFRP bars", Struct. Eng. Mech., 53(1), 41-55. https://doi.org/10.12989/sem.2015.53.1.041
  30. Moyo, P., Brownjohnb, J.M.W., Sureshc, R. and Tjin, S.C. (2005), "Development of fiber Bragg grating sensors for monitoring civil infrastructure", Eng. Struct., 27, 1828-1834. https://doi.org/10.1016/j.engstruct.2005.04.023
  31. Perrya, M., Yanb, Z., Sunb, Z., Zhang, L., Niewczasa, P. and Johnston, M. (2014), "High stress monitoring of prestressing tendons in nuclear concrete vessels using fibre-optic sensors," Nucl. Eng. Des., 268, 35-40. https://doi.org/10.1016/j.nucengdes.2013.12.038
  32. Refai, A.E., Abed, F. and Al-Rahmani, A. (2015), "Structural performance and serviceability of concrete beams reinforced with hybrid (GFRP and steel) bars", Constr. Build. Mater., 96, 518-529. https://doi.org/10.1016/j.conbuildmat.2015.08.063
  33. Rodrigues, C., Felix, C., Lage, A. and Figueiras, J. (2010), "Development of a long-term monitoring system based on FBG sensors applied to concrete bridges", Eng. Struct., 32(8), 1993-2002. https://doi.org/10.1016/j.engstruct.2010.02.033
  34. Shin, C.S. and Chiang, C.C. (2006), "Fatigue damage monitoring in polymeric composites using multiple fiber bragg gratings", J. Fatig., 28, 1315-1321. https://doi.org/10.1016/j.ijfatigue.2006.02.032
  35. Takeda, S., Aoki, Y. and Nagao, Y. (2012), "Damage monitoring of CFRP stiffened panels under compressive load using FBG sensors", Compos. Struct., 94, 813-819. https://doi.org/10.1016/j.compstruct.2011.02.020
  36. Tan, G.H., Osborne, N.H. and Brownjohn, J.M. (2008), "Reducing false alerts by improving vibration wire strain gauge data quality using fast fourier transform", Proceedings of the International Conference on Deep Excavations (ICED), Singapore.
  37. Tian, S., Yang, Z., Chen, X. and Xie, Y. (2015), "Damage detection based on static strain responses using FBG in a wind turbine blade", Sens., 15, 19992-20005. https://doi.org/10.3390/s150819992
  38. Tsuda, H. and Lee, J.R. (2007), "Strain and damage monitoring of CFRP in impact loading using a fiber bragg grating sensor system", Compos. Sci. Technol., 67, 1353-1361. https://doi.org/10.1016/j.compscitech.2006.09.017
  39. Yin, S., Ruffin, P.B. and Yu, F.T.S. (2008), Fiber Optic Sensors, CRC Press.
  40. Zhao, X., Gou, J., Song, G. and Ou, J. (2009), "Strain monitoring in glass fiber reinforced composites embedded with carbon nanopaper sheet using fiber bragg grating (FBG) sensors", Compos. Part B: Eng., 40, 134-140. https://doi.org/10.1016/j.compositesb.2008.10.007

피인용 문헌

  1. PVC and POM gripping mechanisms for tension testing of FRP bars vol.77, pp.1, 2021, https://doi.org/10.12989/sem.2021.77.1.075
  2. Numerical and experimental investigation for monitoring and prediction of performance in the soft actuator vol.77, pp.2, 2021, https://doi.org/10.12989/sem.2021.77.2.167