Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Dynamic analysis of the agglomerated SiO2 nanoparticles-reinforced by concrete blocks with close angled discontinues subjected to blast load

  • Received : 2017.08.17
  • Accepted : 2017.10.27
  • Published : 2018.01.10
⟨ Previous Next ⟩

Abstract

Three structure-dependent integration methods with no numerical dissipation have been successfully developed for time integration. Although these three integration methods generally have the same numerical properties, such as unconditional stability, second-order accuracy, explicit formulation, no overshoot and no numerical damping, there still exist some different numerical properties. It is found that TLM can only have unconditional stability for linear elastic and stiffness softening systems for zero viscous damping while for nonzero viscous damping it only has unconditional stability for linear elastic systems. Whereas, both CEM and CRM can have unconditional stability for linear elastic and stiffness softening systems for both zero and nonzero viscous damping. However, the most significantly different property among the three integration methods is a weak instability. In fact, both CRM and TLM have a weak instability, which will lead to an adverse overshoot or even a numerical instability in the high frequency responses to nonzero initial conditions. Whereas, CEM possesses no such an adverse weak instability. As a result, the performance of CEM is much better than for CRM and TLM. Notice that a weak instability property of CRM and TLM might severely limit its practical applications.

Keywords

References

  1. Aliabadian, Z., Sharafisafa, M., Mortazavi, A. and Maarefvand, P. (2014), "Wave and fracture propagation in continuum and faulted rock masses: distinct element modeling", Arab. J. Geosci., 7, 5021-5035. https://doi.org/10.1007/s12517-013-1155-3
  2. Bayraktar, A., Turker, T., Altunisik, A.C. and Sevim, B. (2010), "Evaluation of blast effects on reinforced concrete buildings considering Operational Modal Analysis results", Soil Dyn. Earthq. Eng., 30, 310-319. https://doi.org/10.1016/j.soildyn.2009.12.005
  3. Brush, O. and Almorth, B. (1975), Buckling of Bars, Plates and Shells, Mc-Graw Hill.
  4. Dadsetan, S. and Bai, J. (2017), "Mechanical and microstructural properties of self-compacting concrete blended with metakaolin, ground granulated blast-furnace slag and fly ash", Constr. Build. Mater., 146, 658-667. https://doi.org/10.1016/j.conbuildmat.2017.04.158
  5. Hause, T. and Librescu, L. (2007), "Dynamic response of doubly-curved anisotropic sandwich panels impacted by blast loadings", Int. J. Solid. Struct., 44, 6678-6700. https://doi.org/10.1016/j.ijsolstr.2007.03.006
  6. Ismail, R. and Cartmell, M.P. (2012), "An analysis of the effects of the orientation angle of a surface crackon the vibration of an isotropic plate", J. Phys.: Conf. Ser., 382, 012007. https://doi.org/10.1088/1742-6596/382/1/012007
  7. Jayasooriy, R., Thambiratnam, D.P., Perera, N.J. and Kosse, V. (2011), "Blast and residual capacity analysis of reinforced concrete framed buildings", Eng. Struct., 33, 3483-3495. https://doi.org/10.1016/j.engstruct.2011.07.011
  8. Jeon, S., Kim, T.H. and You, K.H. (2015), "Characteristics of crater formation due to explosives blasting in rock mass", Geomech. Eng., 9, 329-344. https://doi.org/10.12989/gae.2015.9.3.329
  9. Joseph, P.F. and Erdogan, F. (1991), "Surface crack in a plate under antisymmetric loading conditions", Int. J. Solid. Struct., 27, 725-750. https://doi.org/10.1016/0020-7683(91)90031-A
  10. Kim, H.J., Yi, N.H., Kim, S.B., Nam, J.W., Ha, J.H. and Kim Jay, J.H. (2011), "Debonding failure analysis of FRP-retrofitted concrete panel under blast loading", Struct. Eng. Mech., 38, 479-501. https://doi.org/10.12989/sem.2011.38.4.479
  11. Kinney, G.F. and Graham, KJ. (1985), Explosive Shock, Springer-verlag, Newyork.
  12. Kyei, C. and Braimah, A. (2017), "Effects of transverse reinforcement spacing on the response of reinforced concrete columns subjected to blast loading", Eng. Struct., 142, 148-164. https://doi.org/10.1016/j.engstruct.2017.03.044
  13. Li, G.Q., Yang, T.Ch. and Chen, S.W. (2009), "Behavior and simplified analysis of steel-concrete composite beams subjected to localized blast loading", Struct. Eng. Mech., 32, 337-350. https://doi.org/10.12989/sem.2009.32.2.337
  14. Li, J., Ma, G. and Huang, X. (2010), "Analysis of wave propagation through a filled rock joint", Rock Mech, Rock Eng., 43, 789-798. https://doi.org/10.1007/s00603-009-0033-5
  15. Li, X., Wang, E., Li, Zh., Bie, X., Chen, L., Feng, J. and Li, N. (2016), "Blasting wave pattern recognition based on Hilbert-Huang transform", Geomech. Eng., 11, 607-624. https://doi.org/10.12989/gae.2016.11.5.607
  16. Lu, Y.C. and Xu, Y.G. (1986), "Line-spring model for a surface crack loaded antisymmetrically", National University of Defense Technology Technical Paper.
  17. Luccioni, B., Isla, F., Codina, R., Ambrosini, D., Zerbino, R., Giaccio, G. and Torrijo, M.C. (2017), "Effect of steel fibers on static and blast response of high strength concrete", Int. J. Impact Eng., 107, 23-37. https://doi.org/10.1016/j.ijimpeng.2017.04.027
  18. Ma, H.M., Gao, X. L. and Reddy, J.N. (2011), "A non-classical Mindlin plate model based on a modified couple stress theory", Acta Mech., 220, 217-235. https://doi.org/10.1007/s00707-011-0480-4
  19. Mori, T. and Tanaka, K. (1973), "Average stress in matrix and average elastic energy of materials with misfitting inclusions", Acta Metall. Mater., 21, 571- 574. https://doi.org/10.1016/0001-6160(73)90064-3
  20. Nam, J.W., Kim, H.J., Yi, N.H., Kim, I.S., Jay Kim, J.H. and Choi, H.J. (2009), "Blast analysis of concrete arch structures for FRP retrofitting design", Comput. Concrete, 6, 305-318. https://doi.org/10.12989/cac.2009.6.4.305
  21. Ona, M., Morales-Alonso, G., Galvez, F., Sanchez-Galvez, V. and Cendon, D. (2016), "Analysis of concrete targets with different kinds of reinforcements subjected to blast loading", The Europ. Phys. J. Spec. Top., 225, 265-282. https://doi.org/10.1140/epjst/e2016-02633-8
  22. Petel, O.E., Jette, F.X., Goroshin, S., Frostm D.L. and Ouellet, S. (2011), "Blast wave attenuation through a composite of varying layer distribution", Shock Wav., 21, 215-224. https://doi.org/10.1007/s00193-010-0295-6
  23. Pourghasemi Sagand, M. (2015), "The experimental study of the effects of discountinously on the Blast-induced energy partitioning in resistant rocks", MSc Theses, University of Tehran.
  24. Rice, J.R. and Levy, N. (1972), "The part-through surface crack in an elastic plate", J. Appl. Mech., 39, 185-194. https://doi.org/10.1115/1.3422609
  25. Shi, D.L. and Feng, X.Q. (2004), "The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube reinforced composties", J. Eng. Mat. Tech., ASME, 126, 250-270. https://doi.org/10.1115/1.1751182
  26. Simsek, M. (2010), "Non-linear vibration analysis of a functionally graded Timoshenko beam under action of a moving harmonic load", Compos. Struct., 92, 2532-2546. https://doi.org/10.1016/j.compstruct.2010.02.008
  27. Wu, Y.K., Hao, H., Zhou, Y.X. and Chong, K. (1998), "Propagation characteristics of blast-induced shock waves in a jointed rock mass", Soil Dyn. Earthq. Eng., 17, 407-412. https://doi.org/10.1016/S0267-7261(98)00030-X
  28. Yoo, D.Y. and Banthia, N. (2017), "Mechanical and structural behaviors of ultra-high-performance fiber-reinforced concrete subjected to impact and blast", Constrt. Build. Mater., 149, 416-431. https://doi.org/10.1016/j.conbuildmat.2017.05.136