DOI QR코드

DOI QR Code

Damage controlled optimum seismic design of reinforced concrete framed structures

  • Gharehbaghi, Sadjad (Department of Civil Engineering, Behbahan Khatam Alanbia University of Technology)
  • 투고 : 2017.04.02
  • 심사 : 2017.10.27
  • 발행 : 2018.01.10

초록

In this paper, an innovative procedure is proposed for the seismic design of reinforced concrete frame structures. The main contribution of the proposed procedure is to minimize the construction cost, considering the uniform damage distribution over the height of structure due to earthquake excitations. As such, this procedure is structured in the framework of an optimization problem, and the initial construction cost is chosen as the objective function. The aim of uniform damage distribution is reached through a design constraint in the optimization problem. Since this aim requires defining allowable degree of damage, a damage pattern based on the concept of global collapse mechanism is presented. To show the efficiency of the proposed procedure, the uniform damage-based optimum seismic design is compared with two other seismic design procedures, which are the strength-based optimum seismic design and the damage-based optimum seismic design. By using the three different seismic design methods, three reinforced concrete frames including six-, nine-, and twelve-story with three bays are designed optimally under a same artificial earthquake. Then, to show the effects of the uniform damage distribution, all three optimized frames are used for seismic damage analysis under a suite of earthquake records. The results show that the uniform damage-based optimum seismic design method renders a design that will suffer less damage under severe earthquakes.

키워드

참고문헌

  1. ACI Committee 318 (2011), "Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary (ACI 318R-11)", American Concrete Institute, Farmington Hills, Mich.
  2. ATC40 (1997), "Seismic evaluation and retrofit of concrete buildings", Applied Technology Council, California Seismic Safety Commission.
  3. Banon, H. and Veneziano, D. (1982), "Seismic safety of reinforced members and structures", Earthq. Eng. Struct. Dyn., 10, 179-193. https://doi.org/10.1002/eqe.4290100202
  4. Basu, B. and Gupta, V.K. (1996), "A note on damage-based inelastic spectra", Earthq. Eng. Struct. Dyn., 25, 421-433. https://doi.org/10.1002/(SICI)1096-9845(199605)25:5<421::AID-EQE560>3.0.CO;2-7
  5. Chan, C.M. and Zou, X.K. (2004), "Elastic and inelastic drift performance optimization for reinforced concrete buildings under earthquake loads", Earthq. Eng. Struct. Dyn., 33, 926-950.
  6. Chung, Y.S., Hatamoto, H., Meyer, C. and Shinozuka, M. (1993), "Seismic safety improvement of damage-controlled reinforced concrete frames", Adv. Eng. Softw., 18, 95-102. https://doi.org/10.1016/0965-9978(94)90003-5
  7. Cosenza, C., Manfredi, G. and Ramasco, R. (1993), "The use of damage functionals in earthquake engineering: a comparison between different methods", Earthq. Eng. Struct. Dyn., 22, 855-868. https://doi.org/10.1002/eqe.4290221003
  8. Cruz, M.F. and Lopez, O.A. (2004), "Design of reinforced concrete frames with damage control", Eng. Struct., 26, 2037-2045. https://doi.org/10.1016/j.engstruct.2004.01.002
  9. Elenas, A. and Meskouris, K. (2001), "Correlation study between seismic acceleration parameters and damage indices of structures", Eng. Struct., 23, 698-704. https://doi.org/10.1016/S0141-0296(00)00074-2
  10. Fajfar, P. (1992), "Equivalent ductility factors taking into account low-cycle fatigue", Earthq. Eng. Struct. Dyn., 21, 837-848. https://doi.org/10.1002/eqe.4290211001
  11. Fajfar, P. and Gaspersic, P. (1996), "The N2 method for the seismic damage analysis for RC buildings", Earthq. Eng. Struct. Dyn., 25, 23-67.
  12. FEMA (2000), "Pre standard and commentary for the seismic rehabilitation of buildings (FEMA-356)", Federal Emergency Manage Agency, the American Society of Civil Engineers, Washington.
  13. Fragiadakis, M. and Papadrakakis, M. (2008), "Performance-based optimum seismic design of reinforced concrete structures", Earthq. Eng. Struct. Dyn., 37, 825-844. https://doi.org/10.1002/eqe.786
  14. Ganzerli, S., Pantelides, C.P. and Reaveley. L.D. (2000), "Performance-based design using structural optimization", Earthq. Eng. Struct. Dyn., 29, 1677-1690. https://doi.org/10.1002/1096-9845(200011)29:11<1677::AID-EQE986>3.0.CO;2-N
  15. Gharehbaghi, S. and Fadaee, M.J. (2012), "Design optimization of reinforced concrete frames under earthquake loads", Int. J. Optim. Civil Eng., 2, 459-477.
  16. Gharehbaghi, S. and Khatibinia, M. (2015), "Optimal seismic design of reinforced concrete structures under time-history earthquake loads using an intelligent hybrid algorithm", Earthq. Eng. Eng. Vib., 14, 97-109. https://doi.org/10.1007/s11803-015-0009-2
  17. Gharehbaghi, S. and Salajegheh, E. (2011), "Optimum distribution of hysteretic energy in reinforced concrete structures", Proceedings of the 6th National Congress of Civil Engineering, Semnan, Iran. (in Persian)
  18. Gharehbaghi, S., Moustafa, A. and Salajegheh, E. (2016), "Optimum seismic design of reinforced concrete frame structures", Comput. Concrete, 17, 761-786. https://doi.org/10.12989/cac.2016.17.6.761
  19. Gharehbaghi, S., Salajegheh, E. and Khatibinia, M. (2011), "Optimization of reinforced concrete moment resistant frames based on uniform hysteretic energy distribution", Proceedings of the 1st International Conference on Urban Construction in the Vicinity of Active Faults, Tabriz, Iran.
  20. Gharehbaghi, S., Salajegheh, E. and Khatibinia, M. (2012), "Evaluation of seismic energy demand of reinforced concrete moment resistant frames considering soil-structure interaction effects", Proceedings of the Eleventh International Conference on Computational Structures Technology, Ed. Topping, B.H.V., Civil-Comp Press, Dubrovnik, Croatia.
  21. Ghobarah, A., Abou-Elfath, H. and Biddah, A. (1999), "Responsebased damage assessment of structures", Earthq. Eng. Struct. Dyn., 28, 79-104. https://doi.org/10.1002/(SICI)1096-9845(199901)28:1<79::AID-EQE805>3.0.CO;2-J
  22. Gholizadeh, S. and Salajegheh, E. (2009), "Optimal design of structures for time history loading by swarm intelligence and an advanced metamodel", Comput. Meth. Appl. Mech. Eng., 198, 2936-49. https://doi.org/10.1016/j.cma.2009.04.010
  23. Hajirasouliha, I., Asadi, P. and Pilakoutas K. (2012), "An efficient performance-based seismic design method for reinforced concrete frames", Earthq. Eng. Struct. Dyn., 41,663-679. https://doi.org/10.1002/eqe.1150
  24. Heidari, A. and Gharehbaghi, S. (2015), "Seismic performance improvement of special truss moment frames using damage and energy concepts", Earthq. Eng. Struct. Dyn., 44, 1055-1073. https://doi.org/10.1002/eqe.2499
  25. Housner, G.W. (1975), "Measures of severity of earthquake ground shaking", Proceedigns of the 1st U.S. National Conference on Earthquake Engineering, EERI, Oakland, California.
  26. Kennedy, J. and Eberhart, R.C. (2001), Swarm Intelligence. Academic Press, San Diego, California.
  27. Kennedy, R.P. (1981), "Peak acceleration as a measure of damage", Proceedings of the 4th International Seminar on Extreme Load Design of Nuclear Power Facilities, Paris, France.
  28. Kent, D.C. and Park, R. (1997), "Flexural members with confined concrete", J. Struct. Div., 97, 1969-1990.
  29. Khashaee, P. (2004), "Energy-based seismic design and damage assessment for structures", Ph.D. Thesis, Department of Civil Engineering, Southern Methodist University, USA.
  30. Khatibinia, M., Gharehbaghi, S. and Moustafa, A. (2015), "Seismic reliability-based design optimization of reinforced concrete structures including soil-structure interaction effects", Earthquake Engineering- From Engineering Seismology to Optimal Seismic Design of Engineering Structures, Ed. A. Moustafa, InTech, Croatia.
  31. Khatibinia, M., Salajegheh, E., Salajegheh, J. and Fadaee, M.J. (2013), "Reliability-based design optimization of reinforced concrete structures including soil-structure interaction using a discrete gravitational search algorithm and a proposed metamodel", Eng. Optim., 45, 1147-1165. https://doi.org/10.1080/0305215X.2012.725051
  32. Kunnath, S.K. (2005), "Performance-based seismic design and evaluation of building structures", Earthq. Eng. Struct. Des., Eds. Chen, W.F. and Lui, E. M., CRC Press.
  33. Kunnath, S.K., Reinhorn, A.M. and Lobo, R.F. (1992), "IDARC Version 3: A program for the inelastic damage analysis of RC structures", Technical Report NCEER-92-0022, National Centre for Earthquake Engineering Research, State University of New York, Buffalo, NY.
  34. Lagaros, N.D. and Papadrakakis, M. (2007), "Seismic design of RC structures: A critical assessment in the framework of multiobjective optimization", Earthq. Eng. Struct. Dyn., 36, 1623-1639. https://doi.org/10.1002/eqe.707
  35. Lagaros, N.D., Fragiadakis, M., Papadrakakis, M. and Tsompanakis, Y. (2006), "Structural optimization: A tool for evaluating seismic design procedures", Eng. Struct., 28, 1623-1633. https://doi.org/10.1016/j.engstruct.2006.02.014
  36. Lee, C. and Ahn, J. (2003), "Flexural design of reinforced concrete frames by genetic algorithm", J. Struct. Eng., 129, 762-74. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(762)
  37. Mahin, S.A. and Bertero, V.V. (1981), "An evaluation of inelastic seismic design spectra", J. Struct. Div., 107, 1777-1795.
  38. MATLAB (2010), The Language of Technical Computing, Math Works Inc.
  39. Miyakoshi, J. and Hayashi, Y. (2000), "Correlation of building damage with indices of seismic ground motion intensity during the 1999 Chi-Chi, Taiwan earthquake", Proceedings of the International Workshop on Annual Commemoration of Chi-Chi Earthquake, NCREE, Taipei, Taiwan, 2, 337-348.
  40. Montuori, R. and Muscati, R. (2015), "Plastic design of seismic resistant reinforced concrete frame", Earthq. Struct., 8, 205-224. https://doi.org/10.12989/eas.2015.8.1.205
  41. Montuori, R. and Muscati, R. (2016), "A general design procedure for failure mechanism control of reinforced concrete frames", Eng. Struct., 118, 137-155. https://doi.org/10.1016/j.engstruct.2016.03.043
  42. Montuori, R., Nastri, E. and Piluso, V. (2015), "Advances in Theory of Plastic Mechanism Control: closed form solution for MR-frames", Earthq. Eng. Struct. Dyn., 44, 1035-1054. https://doi.org/10.1002/eqe.2498
  43. Moustafa, A. (2011), "Damage-based design earthquake loads for single-degree-of-freedom inelastic structures", J. Struct. Eng., 137, 456-467. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000074
  44. OPENSEES (2012), "Open system for earthquake engineering simulation", Pacific Earthquake Engineering Research Centre, Release 2. 3. 2, University of California, Berkeley.
  45. Park, Y.J. and Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111, 722-739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)
  46. Park, Y.J., Ang, A.H.S. and Wen, Y.K. (1987), "Damage-limiting aseismic design of buildings", Earthq. Spectra, 3, 1-26. https://doi.org/10.1193/1.1585416
  47. PEER Strong Motion Database (2012), http://peer.berkeley.edu/smcat/index.html.
  48. Roufaiel, M.S.L. and Meyer, C. (1987), "Analytical modeling of hysteretic behavior of r/c frames", J. Struct. Eng., 113, 429-444. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:3(429)
  49. Salajegheh, E., Gholizadeh, S. and Khatibinia, M. (2008), "Optimal design of structures for earthquake loads by a hybrid RBF-BPSO method", Earthq. Eng. Eng. Vib., 7, 14-24.
  50. SEAOC, Vision 2000 Committee (1995), "Performance based seismic engineering of buildings", Structural Engineers Association of California, Sacramento, California.
  51. Seismosoft Programs (2013), http://www.seismosoft.com.
  52. Standard No. 2800 (2800-code) (2004), Iranian Code of Practice for Seismic Resistant Design of Buildings, Building and Housing Research Center, 3rd Edition, Tehran, Iran.
  53. United States Geological Survey (USGS) (2012), http://earthquake.usgs.gov.
  54. Vanderplaats, G.N. (1984), Numerical Aptimization Techniques for Engineering Design with Applications, McGraw Hill, NewYork.
  55. Yazdani, H., Khatibinia, M., Gharehbaghi, S. and Hatami, K. (2017), "Probabilistic performance-based optimum seismic design of RC structures considering soil-structure interaction effects", ASCE-ASME J. Risk Uncert. Eng. Syst., Part A: Civil Eng., 3, G4016004. https://doi.org/10.1061/AJRUA6.0000880
  56. Zahrah, T.F. and Hall, W. J. (1984), "Earthquake energy absorption in SDOF structures", J. Struct. Eng., 110, 1757-1772. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:8(1757)
  57. ASCE/SEI 7-10 (2010), "Minimum design loads for buildings and other structures", American Society of Civil Engineers/Structural Engineering Institute, Reston, VA.

피인용 문헌

  1. An efficient method for optimizing the seismic resistance of reinforced concrete frame structures vol.23, pp.4, 2018, https://doi.org/10.1177/1369433219878856
  2. Sensitivity analysis to determine seismic retrofitting column location in reinforced concrete buildings vol.78, pp.1, 2021, https://doi.org/10.12989/sem.2021.78.1.077