DOI QR코드

DOI QR Code

Axial load detection in compressed steel beams using FBG-DSM sensors

  • Bonopera, Marco (Bridge Engineering Division, National Center for Research on Earthquake Engineering) ;
  • Chang, Kuo-Chun (Department of Civil Engineering, National Taiwan University) ;
  • Chen, Chun-Chung (Bridge Engineering Division, National Center for Research on Earthquake Engineering) ;
  • Lee, Zheng-Kuan (Bridge Engineering Division, National Center for Research on Earthquake Engineering) ;
  • Tullini, Nerio (Department of Engineering, University of Ferrara)
  • 투고 : 2017.05.15
  • 심사 : 2017.12.12
  • 발행 : 2018.01.25

초록

Nondestructive testing methods are required to assess the condition of civil structures and formulate their maintenance programs. Axial force identification is required for several structural members of truss bridges, pipe racks, and space roof trusses. An accurate evaluation of in situ axial forces supports the safety assessment of the entire truss. A considerable redistribution of internal forces may indicate structural damage. In this paper, a novel compressive force identification method for prismatic members implemented using static deflections is applied to steel beams. The procedure uses the Euler-Bernoulli beam model and estimates the compressive load by using the measured displacement along the beam's length. Knowledge of flexural rigidity of the member under investigation is required. In this study, the deflected shape of a compressed steel beam is subjected to an additional vertical load that was short-term measured in several laboratory tests by using fiber Bragg grating-differential settlement measurement (FBG-DSM) sensors at specific cross sections along the beam's length. The accuracy of midspan deflections offered by the FBG-DSM sensors provided excellent force estimations. Compressive load detection accuracy can be improved if substantial second-order effects are induced in the tests. In conclusion, the proposed method can be successfully applied to steel beams with low slenderness under real conditions.

키워드

과제정보

연구 과제 주관 기관 : National Applied Research Laboratories

참고문헌

  1. Aldar, A. (Ed.) (2013), Health assessment of engineered structures: bridges, buildings, and other infrastructures, World Scientific Publishing.
  2. Bahra, A.S. and Greening, P.D. (2011), "Identifying multiple axial load patterns using measured vibration data", J. Sound Vib., 330(15), 3591-3605. https://doi.org/10.1016/j.jsv.2011.02.024
  3. Bazant, Z.P. and Cedolin, L. (1991), Stability of Structures, Oxford University Press, New York.
  4. Bonopera, M., Chang, K.C., Chen, C.C., Lin, T.K. and Tullini, N. (2018), "Compressive column load identification in steel space frames using second-order deflection-based methods", Int. J. Struct. Stab. Dy., 18(7), 1850092. DOI: 10.1142/S021945541850092X
  5. Chang, K.C., Lee, Z.K. and Chen, C.C. (2012), "Structural assessment of a repaired cable bridge damaged in 1999 Chi-Chi earthquake", Proceedings of the International Symposium on Engineering Lessons Learned from the 2011 Great East Japan Earthquake, March 1-4, Tokyo, Japan.
  6. International Federation for Structural Concrete (2003), Monitoring and safety evaluation of existing concrete structures, FIB Bulletin No. 22, Lausanne, Switzerland.
  7. Kim, Y.S., Sung, H.J., Kim, H.W. and Kim, J.M. (2011), "Monitoring of tension force and load transfer of ground anchor by using optical FBG sensors embedded tendon", Smart Struct. Syst., 7(4), 303-317. https://doi.org/10.12989/sss.2011.7.4.303
  8. Lai, C.C., Au, H.Y., Liu, M.S.Y., Ho, S.L. and Tam, H.Y. (2016), "Development of level sensors based on fiber Bragg grating for railway track differential settlement measurement", IEEE Sens. J., 16(16), 6346-6350. https://doi.org/10.1109/JSEN.2016.2574622
  9. Lee, Z.K, Chen, C.C., Hung, H.H., Sung, Y.C. and Lee, L.S. (2014), "Loading tests and long-term monitoring on Wugu- Yangmei viaduct of Taiwan National Highway", Proceedings of the 5th Asia Conference on Earthquake Engineering, October 16-18, Taipei, Taiwan.
  10. Lee, Z.K. (2013), "Dazhi bridge safety monitoring demonstration project", Proceedings of the 5th International Conference on Advances in Experimental Structural Engineering, November 8-9, Taipei, Taiwan.
  11. Lee, Z.K. (2014), Bridge safety monitoring integrated system with full optical fiber and the method for sensing thereof, J.P. Patent No. 5542980.
  12. Lee, Z.K. (2015), Bridge safety monitoring integrated system with full optical fiber and the method for sensing thereof, U.S. Patent No. 9183739.
  13. Lim, Y.Y. and Soh, C.K. (2013), "Damage detection and characterization using EMI technique under varying axial load", Smart Struct. Syst., 11(4), 349-364. https://doi.org/10.12989/sss.2013.11.4.349
  14. Maes, K., Peeters, J., Reynders, E., Lombaert, G. and De Roeck, G. (2013), "Identification of axial forces in beam members by local vibration measurements", J. Sound Vib., 332(21), 5417-5432. https://doi.org/10.1016/j.jsv.2013.05.017
  15. Marecos, J. (1978), "The measurement of vertical displacements through water levelling method", Mater. Struct., 11(5), 361-370.
  16. Naseralavi, S.S., Shojaee, S. and Ahmadi, M. (2016), "Modified gradient methods hybridized with Tikhonov regularization for damage identification of spatial structure", Smart Struct. Syst., 18(5), 839-864. https://doi.org/10.12989/sss.2016.18.5.839
  17. Rebecchi, G., Tullini, N. and Laudiero, F. (2013), "Estimate of the axial force in slender beams with unknown boundary conditions using one flexural mode shape", J. Sound Vib., 332(18), 4122-4135. https://doi.org/10.1016/j.jsv.2013.03.018
  18. Rodrigues, C., Felix, C. and Figueiras, J. (2011), "Fiber-opticbased displacement transducer to measure bridge deflections", Struct. Health Monit., 10(2), 147-156. https://doi.org/10.1177/1475921710373289
  19. Rodrigues, C., Felix, C., Lage, A. and Figueiras, J. (2010), "Development of a long-term monitoring system based on FBG sensors applied to concrete bridges", Eng. Struct., 32(8), 1993-2002. https://doi.org/10.1016/j.engstruct.2010.02.033
  20. Sung, H.J., Do, T.M., Kim, J.M. and Kim, Y.S. (2017), "Longterm monitoring of ground anchor tensile forces by FBG sensors embedded tendon", Smart Struct. Syst., 19(3), 269-277. https://doi.org/10.12989/sss.2017.19.3.269
  21. Timoshenko, S.P. and Gere, J.M. (1961), Theory of Elastic Stability, McGraw-Hill, New York.
  22. Tullini, N. (2013), "Bending tests to estimate the axial force in slender beams with unknown boundary conditions", Mech. Res. Commun., 53, 15-23. https://doi.org/10.1016/j.mechrescom.2013.07.011
  23. Tullini, N. and Laudiero, F. (2008), "Dynamic identification of beam axial loads using one flexural mode shape", J. Sound Vib., 318(1-2), 131-147. https://doi.org/10.1016/j.jsv.2008.03.061
  24. Tullini, N., Rebecchi, G. and Laudiero, F. (2012), "Bending tests to estimate the axial force in tie-rods", Mech. Res. Commun., 44, 57-64. https://doi.org/10.1016/j.mechrescom.2012.06.005
  25. Vurpillot, S., Krueger, G., Benouaich, D., Clement, D. and Inaudi, D. (1998), "Vertical deflection of a pre-stressed concrete bridge obtained using deformation sensors and inclinometer measurements", ACI Struct. J., 95(5), 518-526.

피인용 문헌

  1. Reliability of the Tensile Force Identification in Ancient Tie-Rods Using One Flexural Mode Shape pp.1558-3066, 2019, https://doi.org/10.1080/15583058.2018.1563227
  2. Influence of prestressing on the behavior of uncracked concrete beams with a parabolic bonded tendon vol.77, pp.1, 2018, https://doi.org/10.12989/sem.2021.77.1.001