Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Analysis on natural vibration characteristics of steel-concrete composite truss beam

  • Jiang, Lizhong (School of Civil Engineering, Central South University) ;
  • Feng, Yulin (School of Civil Engineering, Central South University) ;
  • Zhou, Wangbao (School of Civil Engineering, Central South University) ;
  • He, Binbin (State Key Laboratory of Frozen Soil Engineering, Northwest Institute of Eco-Environment and Resources, CAS)
  • Received : 2017.03.18
  • Accepted : 2017.09.29
  • Published : 2018.01.10
⟨ Previous Next ⟩

Abstract

In order to study the natural vibration characteristics of steel-concrete composite truss beam (SCCTB), the influence of multiple factors such as interface slip, shear deformation and moment of inertia are considered. Afterwards, based on the Hamilton principle the vibration control differential equation and natural boundary conditions of SCCTB are deduced. By solving SCCTB differential equations of vibration control, an analytical calculation method is proposed for analyzing the natural vibration characteristics of SCCTB. The natural frequencies of SCCTBs with different degrees of shear connection and effective lengths are calculated by using the analytical method, and the results are compared against those obtained from ANSYS finite element numerical calculation method. The results show that the analytical method considering the influence factors such as interface slip, shear deformation and moment of inertia are in good agreement with those obtained from ANSYS finite element numerical calculation method. This evidences the correctness of the analytical method and show that the method proposed exhibits improvement over the previously developed theories for the natural vibration characteristics of SCCTB. Finally, based on the analytical method, the influence factors of SCCTB natural vibration characteristics are analyzed. The results indicate that the influence of interface slip stiffness on SCCTB's natural frequency is more than 10% and therefore cannot be neglected. Moreover, shear deformation has an effect of more than 35% on SCCTB's natural frequency and the effect cannot be ignored either in this case too.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China, Central South University

References

  1. Aiello, M.A. (2008), "Analisi sperimentale della connessione acciaio-calcestruzzo nelle travi reticolari miste (Experimental analysis of steel-concrete connection in hybrid truss beams)", Proceeding of 7th Italian Workshop on Composite Structures.
  2. Bouchair, A., Bujnak, J. and Duratna, P. (2012), "Connection in steel-concrete composite truss", Procedia Eng., 40, 96-101. https://doi.org/10.1016/j.proeng.2012.07.062
  3. Bujnak, J. and Bouchair, A. (2014), "Theoretical and experimental research on steel concrete composite truss", IABSE Symposium Report International Association for Bridge and Structural Engineering, 102(19), 1749-1756.
  4. Campione, G., Colajanni, P. and Monaco, A. (2016), "Analytical evaluation of steel-concrete composite trussed beam shear capacity", Mater. Struct., 49(8), 3159-3176. https://doi.org/10.1617/s11527-015-0711-6
  5. Chan, S.L. and Fong, M. (2011a), "Experimental and analytical investigations of steel and composite trusses", Conference paper Advanced Steel Construction, 26, 1-17.
  6. Colajanni, P., La Mendola, L. and Monaco, A. (2014), "Stress transfer mechanism investigation in hybrid steel trussedconcrete beams by push-out tests", J. Constr. Steel Res., 95, 56-70. https://doi.org/10.1016/j.jcsr.2013.11.025
  7. Colajanni, P., La Mendola, L., Latour, M., Monaco, A. and Rizzano, G. (2015a), "FEM analysis of push-out test response of Hybrid Steel Trussed Concrete Beams (HSTCBs)", J. Constr. Steel Res., 111, 88-102. https://doi.org/10.1016/j.jcsr.2015.04.011
  8. Colajanni, P., La Mendola, L. and Monaco, A. (2015b), "Stiffness and strength of composite truss beam to RC column connection in MRFs", J. Constr. Steel. Res., 113, 86-100. https://doi.org/10.1016/j.jcsr.2015.06.003
  9. Colajanni, P., La Mendola, L., Latour, M., Monaco, A. and Rizzano, G. (2017), "Analytical prediction of the shear connection capacity in composite steel-concrete trussed beams", Mater. Struct., 50(1), 48. https://doi.org/10.1617/s11527-016-0931-4
  10. Ding, F., Liu, J., Liu, X., Guo, F. and Jiang, L. (2016), "Flexural stiffness of steel-concrete composite beam under positive moment", Steel Compos. Struct., 20(6), 1369-1389. https://doi.org/10.12989/scs.2016.20.6.1369
  11. Duratna, P., Bujnak, J. and Bouchair, A. (2013), "Behavior of steel-concrete composite trusses", Pollack Periodica, 8(2), 23-28. https://doi.org/10.1556/Pollack.8.2013.2.3
  12. Fong, M., Chan, S.L. and Uy, B. (2011b), "Advanced design for trusses of steel and concrete-filled tubular sections", Eng. Struct., 33(12), 3162-3171. https://doi.org/10.1016/j.engstruct.2011.08.002
  13. Giltner, B. and Kassimali, A. (2000), "Equivalent beam method for trusses", Pract. Period. Struct. Des. Constr., 5(2), 70-77. https://doi.org/10.1061/(ASCE)1084-0680(2000)5:2(70)
  14. Han, Q., Yuan, Z., Ying, M. and Liu, X. (2005), "Numerical analysis and experimental study of prestressed diagonal-onsquare composite space truss", Adv. Struct. Eng., 8(4), 397-410. https://doi.org/10.1260/136943305774353115
  15. Han, Q.H. (2004), "Analysis of natural vibration characteristics and testing on construction site of pre-stressed composite space truss", Earthq. Eng. Eng. Vib., 24(2), 118-124.
  16. Liu, J., Ding, F., Liu, X. and Yu, Z. (2016), "Study on flexural capacity of simply supported steel-concrete composite beam", Steel Compos. Struct., 21(4), 829-847. https://doi.org/10.12989/scs.2016.21.4.829
  17. Machacek, J. and Cudejko, M. (2009), "Longitudinal shear in composite steel and concrete trusses", Eng. Struct., 31(6), 1313-1320. https://doi.org/10.1016/j.engstruct.2008.07.009
  18. Machacek, J. and Cudejko, M. (2010), "Shear connection in steel and concrete composite trusses", SDSS'Rio 2010 Stability and Ductility of Steel Structures, 8-10.
  19. Machacek, J. and Cudejko, M. (2011), "Composite steel and concrete bridge trusses", Eng. Struct., 33(12), 3136-3142. https://doi.org/10.1016/j.engstruct.2011.08.017
  20. Morassi, A., Nakamura, G., Shirota, K. and Sini, M. (2007), "A variational approach for an inverse dynamical problem for composite beams", Eur. J. Appl. Math., 18(1), 21-55. https://doi.org/10.1017/S0956792507006833
  21. Nie, J., Cai, C.S. and Wang, T. (2005), "Stiffness and capacity of steel-concrete composite beams with profiled sheeting", Eng. Struct., 27(7), 1074-1085. https://doi.org/10.1016/j.engstruct.2005.02.016
  22. Nie, J., Fan, J. and Cai, C.S. (2004), "Stiffness and deflection of steel-concrete composite beams under negative bending", J. Struct. Eng., 130(11), 1842-1851. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1842)
  23. Nie, J.G., Cai, C.S., Zhou, T.R. and Li, Y. (2007), "Experimental and analytical study of prestressed steel-concrete composite beams considering slip effect", J. Struct. Eng., 133(4), 530-540. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:4(530)
  24. Siekierski, W. (2016a), "An analytical method to estimate the natural bending frequency of the spans of railway through truss bridges with steel and concrete composite decks", Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 230(8), 1908-1918.
  25. Siekierski, W. (2016b), "Analysis of concrete shrinkage along truss bridge with steel-concrete composite deck", Steel Compos. Struct., 20(6), 1237-1257. https://doi.org/10.12989/scs.2016.20.6.1237
  26. Zhou, L., Yu, Z. and He, G. (2013), "A new 3-D element formulation on displacement of steel-concrete composite box beam", J. Cent. South Univ., 20(5), 1354-1360. https://doi.org/10.1007/s11771-013-1622-8
  27. Zhou, W., Jiang, L., Huang, Z. and Li, S. (2016), "Flexural natural vibration characteristics of composite beam considering shear deformation and interface slip", Steel Compos. Struct., 20(5), 1023-1042. https://doi.org/10.12989/scs.2016.20.5.1023
  28. Zhou, W., Jiang, L., Yu, Z. and Huang, Z. (2013), "Analysis of free vibration characteristics of steel-concrete composite continuous box girder considering shear lag and slip", J. Cent. South Univ., 20(9), 2570-2577. https://doi.org/10.1007/s11771-013-1770-x
  29. Zhou, W., Li, S.J., Jiang, L. and Qin, S. (2015), "Vibration analysis of steel-concrete composite box beams considering shear lag and slip", Math. Probl. Eng., 2015, 1-8.
  30. Zhou, W.B., Jiang, L.Z., Liu, Z.J. and Liu, X.J. (2012), "Closed-form solution to thin-walled box girders considering effects of shear deformation and shear lag", J. Cent. South Univ., 19(9), 2650-2655. https://doi.org/10.1007/s11771-012-1323-8

Cited by

  1. Improved Analytical Method to Investigate the Dynamic Characteristics of Composite Box Beam with Corrugated Webs vol.20, pp.1, 2018, https://doi.org/10.1007/s13296-019-00278-4
  2. Dynamic response of a three-beam system with intermediate elastic connections under a moving load/mass-spring vol.19, pp.2, 2018, https://doi.org/10.1007/s11803-020-0568-8