Computers and Concrete

  • 제21권1호
  • /
  • Pages.67-74
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The effective properties of saturated concrete healed by EDM with the ITZs

  • Chen, Qing (Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University) ;
  • Jiang, Zhengwu (Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University) ;
  • Zhu, Hehua (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) ;
  • Ju, J.W. (Department of Civil and Environmental Engineering, University of California) ;
  • Yan, Zhiguo (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) ;
  • Li, Haoxin (Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University)
  • 투고 : 2016.09.08
  • 심사 : 2017.11.14
  • 발행 : 2018.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

A differential scheme based micromechanical framework is proposed to obtain the effective properties of the saturated concrete repaired by the electrochemical deposition method (EDM) considering the interfacial transition zone (ITZ) effects. The constituents of the repaired concrete are treated as different phases, consisting of (micro-)cracks, (micro-)voids and (micro-)pores (occupied by water), deposition products, intrinsic concrete made up by the three traditional solid phases (i.e., mortar, coarse aggregates and their interfaces) and the ITZs. By incorporating the composite sphere assemblage (CSA) model and the differential approach, a new multilevel homogenization scheme is utilized to quantitatively estimate the mechanical performance of the repaired concrete with the ITZs. The CSA model is modified to obtain the effective properties of the equivalent particle, which is a three-phase composite made up of the water, deposition products and the ITZs. The differential scheme is employed to reach the equivalent composite of the concrete repaired by EDM considering the ITZ effects. Moreover, modification procedures considering the ITZ effects are presented to attain the properties of the repaired concrete in the dry state. Results in this study are compared with those of the existing models and the experimental data. It is found that the predictions herein agree better with the experimental data than the previous models.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Berryman, J.G. (1980), "Long-wave propagation in composite elastic media II. Ellipsoidal inclusion", J. Acoust. Soc. Am., 68(6), 1820-1831. https://doi.org/10.1121/1.385172
  2. Chang, J.J., Yeih, W.C., Hsu, H.M. and Huang, N.M. (2009), "Performance evaluation of using electrochemical deposition as a repair method for reinforced concrete beams", Struct. Longev., 1(2), 75-93.
  3. Chen, Q. (2014), "The stochastic micromechanical models of the multiphase materials and their applications for the concrete repaired by electrochemical deposition method", Ph.D. Dissertation Tongji Univ., Shanghai.
  4. Chen, Q., Jiang, Z.W., Yang, Z.H., Zhu, H.H., Ju, J.W., Yan, Z.G. and Wang, Y.Q. (2016a), "Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method", Mater. Struct., 49(12), 5183-5193. https://doi.org/10.1617/s11527-016-0853-1
  5. Chen, Q., Mousavi Nezhad, M., Fisher, Q. and Zhu, H.H. (2016b), "Multi-scale approach for modeling the transversely isotropic elastic properties of shale considering multi-inclusions and interfacial transition zone", Int. J. Rock Mech. Min., 84, 95-104.
  6. Chen, Q., Zhu, H.H., Ju, J.W., Guo, F., Wang, L.B., Yan, Z.G., Deng, T. and Zhou, S. (2015c), "A stochastic micromechanical model for multiphase composite containing spherical inhomogeneities", Acta Mech., 226(6), 1861-1880. https://doi.org/10.1007/s00707-014-1278-y
  7. Chen, Q., Zhu, H.H., Ju, J.W., Jiang, Z.W., Yan, Z.G. and Li, H.X. (2017), "Stochastic micromechanical predictions for the effective properties of concrete considering the interfacial transition zone effects", Int. J. Damage Mech., DOI: 10.1177/1056789517728501.
  8. Chen, Q., Zhu, H.H., Yan, Z.G., Deng, T. and Zhou, S. (2015a), "Micro-scale description of the saturated concrete repaired by electrochemical deposition method based on Mori-Tanaka method", J. Build Struct., 36(1), 98-103.
  9. Chen, Q., Zhu, H.H., Yan, Z.G., Ju, J.W., Deng, T. and Zhou, S. (2015b), "Micro-scale description of the saturated concrete repaired by electrochemical deposition method based on self-consistent method", Chin. J. Theor. Appl. Mech., 47(2), 367-371.
  10. Chen, Q., Zhu, H.H., Yan, Z.G., Ju, J.W., Jiang, Z.W. and Wang, Y.Q. (2016c), "A multiphase micromechanical model for hybrid fiber reinforced concrete considering the aggregate and ITZ effects", Constr. Build. Mater., 114, 839-850. https://doi.org/10.1016/j.conbuildmat.2016.04.008
  11. Chu, H.Q. and Jiang, L.H. (2009), "Correlation analysis between concrete parameters and electrodeposition effect based on grey theory", J. Wuhan Univ. Technol., 31(7), 22-26.
  12. Gal, E. and Kryvoruk, R. (2011), "Fiber reinforced concrete properties-a multiscale approach", Comput. Concrete, 8(5), 525-539. https://doi.org/10.12989/cac.2011.8.5.525
  13. Hashin, Z. (1962), "The elastic moduli of heterogeneous materials", J. Appl. Mech., 29, 143-150. https://doi.org/10.1115/1.3636446
  14. Jiang, Z.W, Sun, Z.P. and Wang, P.M. (2005), "Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes", Cement Concrete Res., 35(8), 1539-1545 https://doi.org/10.1016/j.cemconres.2004.06.028
  15. Jiang, Z.W, Sun, Z.P. and Wang, P.M. (2006), "Internal relative humidity distribution in cement paste due to moisture diffusion and self-desiccation", Cement Concrete Res., 36(2), 320-325. https://doi.org/10.1016/j.cemconres.2005.07.006
  16. Jiang, Z.W., Li, W.T. and Yuan, Z.C. (2015), "Influence of mineral additives and environmental conditions on the selfhealing capabilities of cementitious materials", Cement Concrete Compos., 57, 116-127. https://doi.org/10.1016/j.cemconcomp.2014.11.014
  17. Jiang, Z.W., Li, W.T., Deng, Z.L. and Yan, Z.G. (2013), "Experimental investigation of the factors affecting accuracy and resolution of the pore structure of cement-based materials by thermoporometry", J. Zhejiang Univ-Sci., 14(10), 720-730. https://doi.org/10.1631/jzus.A1300101
  18. Jiang, Z.W., Xing, F., Sun, Z.P. and Wang, P.M. (2008), "Healing effectiveness of cracks rehabilitation in reinforced concrete using electrodeposition method", J. Wuhan Univ. Technol., 23(6), 917-922. https://doi.org/10.1007/s11595-007-6917-x
  19. Ju, J.W. and Chen, T.M. (1994a), "Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities", Acta Mech., 103, 103-121. https://doi.org/10.1007/BF01180221
  20. Ju, J.W. and Chen, T.M. (1994b), "Effective elastic moduli of two-phase composites containing randomly dispersed spherical inhomogeneities", Acta Mech., 103, 123-144. https://doi.org/10.1007/BF01180222
  21. Ju, J.W. and Lee, X. (1991), "Micromechanical damage models for brittle solids. Part I: tensile loadings", J. Eng. Mech., 117, 1495-1514. https://doi.org/10.1061/(ASCE)0733-9399(1991)117:7(1495)
  22. Ju, J.W. and Sun, L.Z. (1999), "A novel formulation for the exterior-point Eshelby's tensor of an ellipsoidal inclusion", J. Appl. Mech-T., ASME, 66(2), 570-574. https://doi.org/10.1115/1.2791090
  23. Ju, J.W. and Sun, L.Z. (2001), "Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities. Part I: micromechanics-based formulation", Int. J. Solid. Struct., 38(2), 183-201. https://doi.org/10.1016/S0020-7683(00)00023-8
  24. Ju, J.W. and Yanase, K. (2010), "Micromechanics and effective elastic moduli of particle-reinforced composites with near-field particle interactions", Acta Mech., 215(1), 135-153. https://doi.org/10.1007/s00707-010-0337-2
  25. Ju, J.W. and Yanase, K. (2011), "Micromechanical effective elastic moduli of continuous fiber-reinforced composites with near-field fiber interactions", Acta Mech., 216(1), 87-103. https://doi.org/10.1007/s00707-010-0356-z
  26. Ju, J.W. and Zhang, X.D. (1998), "Micromechanics and effective transverse elastic moduli of composites with randomly located aligned circular fibers", Int. J. Solid. Struct., 35(9-10), 941-960. https://doi.org/10.1016/S0020-7683(97)00090-5
  27. Li, G.Q., Zhao, Y. and Pang, S.S. (1999), "Four-phase sphere modeling of effective bulk modulus of concrete", Cement Concrete Res., 29, 839-845. https://doi.org/10.1016/S0008-8846(99)00040-X
  28. McLaughlin, R. (1977), "A study of the differential scheme for composite materials", Int. J. Eng. Sci., 15, 237-244. https://doi.org/10.1016/0020-7225(77)90058-1
  29. Mousavi Nezhad, M., Zhu, H.H., Ju, J.W. and Chen, Q. (2016), "A simplified multiscale damage model for the transversely isotropic shale rocks under tensile loading", Int. J. Damage Mech., 25(5), 705-726. https://doi.org/10.1177/1056789516639531
  30. Mura, T. (1987), Micromechanics of Defects in Solids, Martinus Nijhoff Publishers, the Netherlands.
  31. Nguyen, N.B., Giraud, A. and Grgic, D. (2011), "A composite sphere assemblage model for porous oolitic rocks", Int. J. Rock Mech. Min., 48, 909-921. https://doi.org/10.1016/j.ijrmms.2011.05.003
  32. Norris, A.N. (1985), "A differential scheme for the effective modulus of composites", Mech. Mater., 4, 1-16. https://doi.org/10.1016/0167-6636(85)90002-X
  33. Otsuki, N. and Ryu, J.S. (2001), "Use of electrodeposition for repair of concrete with shrinkage cracks", J. Mater. Civil Eng., 13(2), 136-142. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:2(136)
  34. Otsuki, N., Hisada, M., Ryu, J.S. and Banshoya, E.J. (1999), "Rehabilition of concrete cracks by electrodeposition", Concrete Int., 21(3), 58-62.
  35. Pichler, C. and Lackner, R. (2008), "A multiscale creep model as basis for simulation of early-age concrete behavior", Comput. Concrete, 5(4), 295-328. https://doi.org/10.12989/cac.2008.5.4.295
  36. Qu, J.M. and Cherkaoui, M. (2006), Fundamentals of Micromechanics of Solids, John Wiley & Sons, Inc., Hoboken, New Jersey.
  37. Ryu, J.S. (2003a), "New waterproofing technique for leaking concrete", J. Mater. Sci. Lett., 22, 1023-1025. https://doi.org/10.1023/A:1024797511048
  38. Ryu, J.S. (2003b), "Influence of crack width, cover depth, water cement ratio and temperature on the formation of electrodeposition on the concrete surface", Mag. Concrete Res., 55(1), 35-40. https://doi.org/10.1680/macr.2003.55.1.35
  39. Ryu, J.S. and Otsuki, N. (2002), "Crack closure of reinforced concrete by electro deposition technique", Cement Concrete Res., 32(1), 159-264. https://doi.org/10.1016/S0008-8846(01)00650-0
  40. Ryu, J.S. and Otsuki, N. (2005), "Experimental study on repair of concrete structural members by electrochemical method", Scripta Materialia, 52, 1123-1127. https://doi.org/10.1016/j.scriptamat.2005.02.001
  41. Sasaki, H. and Yokoda, M. (1992), "Repair method of marine reinforced concrete by electro deposition technique", Proceedings of the Annual Conference of Japanese Concrete Institute, 849-854.
  42. Smith, J.C. (1974), "Correction and extension of Van der Poel's method for calculating the shear modulus of a particulate composite", J. Res. Nat. Bureau Stand. A. Phys. Chem., 78(3), 355-361.
  43. Smith, J.C. (1975), "Simplification of Van der Poel's formula for the shear modulus of a particulate composite", J. Res. Nat. Bureau Stand. A. Phys. Chem., 79A(2), 419-423. https://doi.org/10.6028/jres.079A.007
  44. Smith, J.C. (1976), "Experimental values for the elastic constants of a particulate-filled glassy polymer", J. Res. NBS, 80A, 45-49. https://doi.org/10.6028/jres.080A.008
  45. Sun, L.Z. and Ju, J.W. (2001), "Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities. Part II: applications", Int. J. Solid. Struct., 38(2), 203-225. https://doi.org/10.1016/S0020-7683(00)00026-3
  46. Sun, L.Z. and Ju, J.W. (2004), "Elastoplastic modeling of metal matrix composites containing randomly located and oriented spheroidal particles", J. Appl. Mech-T., ASME, 71, 774-785. https://doi.org/10.1115/1.1794699
  47. Wang, H.L. and Li, Q.B. (2007), "Prediction of elastic modulus and Poisson's ratio for unsaturated concrete", Int. J. Solid. Struct., 44, 1370-1379. https://doi.org/10.1016/j.ijsolstr.2006.06.028
  48. Yaman, I.O., Hearn, N. and Aktan, H.M. (2002), "Active and non-active porosity in concrete part I: experimental evidence", Mater. Struct., 35(3), 102-109. https://doi.org/10.1007/BF02482109
  49. Yan, Z.G., Chen, Q., Zhu, H.H., Ju, J.W., Zhou, S. and Jiang, Z.W. (2013), "A multiphase micromechanical model for unsaturated concrete repaired by electrochemical deposition method", Int. J. Solid. Struct., 50(24), 3875-3885. https://doi.org/10.1016/j.ijsolstr.2013.07.020
  50. Yanase, K. and Ju, J.W. (2012), "Effective elastic moduli of spherical particle reinforced composites containing imperfect interfaces", Int. J. Damage Mech., 21(1), 97-127. https://doi.org/10.1177/1056789510397076
  51. Yokoda, M. and Fukute, T. (1992), "Rehabilitation and protection of marine concrete structure using electrodeposition method", Proceedings of the International RILEM/CSIRO/ACRA Conference on Rehabilitation of Concrete Structures, RILEM, Melbourne.
  52. Yoo, D.Y. and Banthia, N. (2015), "Numerical simulation on structural behavior of UHPFRC beams with steel and GFRP bars", Comput. Concrete, 16(5), 759-774. https://doi.org/10.12989/cac.2015.16.5.759
  53. Zhu, H.H., Chen, Q., Ju, J.W., Yan, Z.G., Guo, F., Wang, Y.Q., Jiang, Z.W., Zhou, S. and Wu, B. (2015), "Maximum entropy based stochastic micromechanical model for two-phase composite considering the inter-particle interaction effect", Acta Mech., 226(9), 3069-3084. https://doi.org/10.1007/s00707-015-1375-6
  54. Zhu, H.H., Chen, Q., Yan, Z.G., Ju, J.W. and Zhou, S. (2014), "Micromechanical model for saturated concrete repaired by electrochemical deposition method", Mater. Struct., 47, 1067-1082. https://doi.org/10.1617/s11527-013-0115-4

피인용 문헌

  1. Stochastic micromechanical predictions for the probabilistic behavior of saturated concrete repaired by the electrochemical deposition method vol.29, pp.3, 2020, https://doi.org/10.1177/1056789519860805
  2. Continuum damage-healing framework for the hydration induced self-healing of the cementitious composite vol.30, pp.5, 2018, https://doi.org/10.1177/1056789520968037