References
- ABS, 1995a. Guide for Assessing Hull-Girder Residual Strength for Tankers. American Bureau of Shipping, New York (NY), United States.
- ABS, 1995b. Guide for Assessing Hull-Girder Residual Strength for Bulk Carriers. American Bureau of Shipping, New York (NY), United States.
- Alie, M.Z.M., Fujikubo, M., Iijima, K., Oka, S., Takemura, K., 2012. Residual longitudinal strength analysis of ship's hull girder with damages. In: Proceedings of the 22nd International Offshore and Polar Engineering Conference ISOPE 2012, pp. 831-838.
- Amlashi, H.K.K., Moan, T., 2008. Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition - a case study Part 1: nonlinear finite element modelling and ultimate hull girder capacity. Mar. Struct. 21, 327-352. https://doi.org/10.1016/j.marstruc.2007.12.006
- Ashman, K.M., Bird, C.M., Zepf, S.E., 1994. Detecting bimodality in astronomical datasets. Astron. J. 108, 2348-2361. https://doi.org/10.1086/117248
- Campanile, A., Mandarino, M., Piscopo, V., 2009. On the exact solution of non-uniform torsion for beams with asymmetric cross section. World Acad. Sci. Eng. Technol. 31, 46-53.
- Campanile, A., Mandarino, M., Piscopo, V., 2010. On the influence of the warping shear stress on the hull girder strength. J. Sh. Res. 54 (4), 231-243.
- Campanile, A., Piscopo, V., Scamardella, A., 2014. Statistical properties of bulk-carrier longitudinal strength. Mar. Struct. 39, 438-462. https://doi.org/10.1016/j.marstruc.2014.10.007
- Campanile, A., Piscopo, V., Scamardella, A., 2015. Statistical properties of bulk-carrier residual strength. Ocean Eng. 106, 47-67. https://doi.org/10.1016/j.oceaneng.2015.06.060
- Campanile, A., Piscopo, V., Scamardella, A., 2016a. Time-variant bulk carrier reliability analysis in pure bending intact and damage conditions. Mar. Struct. 46, 193-228. https://doi.org/10.1016/j.marstruc.2016.02.003
- Campanile, A., Piscopo, V., Scamardella, A., 2016b. Incidence of residual stresses and steel properties variability on corroded bulk carrier reliability. Ocean Eng. 128, 58-80. https://doi.org/10.1016/j.oceaneng.2016.10.026
- Choung, J., Nam, J., Ha, T., 2012. Assessment of residual strength of an asymmetrically damaged tanker considering rotational and translational shifts of neutral axis plane. Mar. Struct. 25, 71-84.
- Choung, J., Nam, J., Tayyar, G.T., 2014. Residual ultimate strength of a very large crude carrier considering probabilistic damage extents. Int. J. Nav. Archit. Ocean Eng. 6 (1), 14-26. https://doi.org/10.2478/IJNAOE-2013-0160
- DNV, 2011. CSA - Direct Analysis of Ship Structures. Classification Notes 2011: 34.1.
- Egge, E.D., Bockenhauer, M., 1991. Calculation of the collision resistance of ships and its assessment for classification purposes. Mar. Struct. 4 (1), 35-56. https://doi.org/10.1016/0951-8339(91)90023-5
- Fang, C., Das, P.K., 2005. Survivability and reliability of damage ships after collision and grounding. Ocean Eng. 32, 293-307. https://doi.org/10.1016/j.oceaneng.2004.08.006
- Fjeld, S., 1978. Reliability of offshore structures. J. Pet. Technol. 30 (10), 1486-1496. https://doi.org/10.2118/6963-PA
- Graham, U., Cook, I., 1996. Understanding Statistics. Oxford University Press.
- Guedes Soares, C., Dogliani, M., Ostergaard, C., Parmentier, G., Pedersen, P.T., 1996. Reliability based ship structural design. Trans. Soc. Nav. Archit. Mar. Eng. - SNAME 104, 357-389.
- Hart, D.K., Rutherford, S.E., Wickham, A.H.S., 1985. Structural reliability analysis of stiffened panels. RINA Trans. 128, 293-310.
- Horte, T., Wang, G., White, N., 2007. Calibration of the hull girder ultimate capacity criterion for double hull tankers. In: Proceedings of the 10th International Symposium on Practical Design of Ships and Other Floating Structures, Houston (TX), pp. 235-246.
- Hussein, A.W., Guedes Soares, C., 2009. Reliability and residual strength of double hull tankers designed according to the new IACS common structural rules. Ocean Eng. 36, 1446-1459. https://doi.org/10.1016/j.oceaneng.2009.04.006
- IACS, 2015a. Common Structural Rules for Bulk Carriers and Oil Tankers. International Association of Classification Societies, London, UK.
- IACS, 2015b. Technical Report for CSR-H External Release on 2014-06-01. International Association of Classification Societies, London, UK.
- IMO, 1973. Regulations on Subdivision and Stability of Passenger Ships as an Equivalent to Part B of Chapter II of the International Convention for the Safety of Life at Sea, 1960. Resolution A.265(VIII).
- IMO, 1995. Interim Guidelines for Approval of Alternative Methods of Design and Construction of Oil Tankers under Regulation 13F(5) of Annex I of Marpol 73/78. Resolution MEPC.66(37).
- IMO, 2003. Revised Interim Guidelines for Approval of Alternative Methods of Design and Construction of Oil Tankers under Regulation 13F(5) of Annex I of Marpol 73/78. Resolution MEPC.110(49).
- IMO, 2009. International Convention for the Safety of Life at Sea, 2009. The International Maritime Organization, London (UK).
- IMO, 2012. Revision of the Damage Stability Regulations for ro-ro Passenger Ships. SLF55/INF.7 Sub-Committee on Stability and Load Lines and on Fishing Vessels Safety.
- ISSC, 2000. 14th International Ship and Offshore Structures Congress, ISSC Committee VI.2: Ultimate Strength.
- ISSC, 2012. 18th international ship and offshore structures congress. In: Fricke, W., Bronsart, R. (Eds.), ISSC Committee III.1: Ultimate Strength.
- Ivanov, L.D., 1986. Statistical evaluation of the ship's hull cross section geometrical characteristics as a function of her age. Int. Shipbuild. Prog. 33 (387), 198-203.
- Kim, D.K., Kim, H.B., Mohd, M.H., Paik, J.K., 2013. Comparison of residual strength-grounding damage index diagrams for tankers produced by the ALPS/HULL ISFEM and design formula method. Int. J. Nav. Archit. Ocean Eng. 5 (1), 47-61. https://doi.org/10.2478/IJNAOE-2013-0117
- Kim, D.K., Kim, H.B., Zhang, X., Guang Li, C., Paik, J.K., 2014. Ultimate strength performance of tankers associated with industry corrosion addition practices. Int. J. Nav. Archit. Ocean Eng. 6 (3), 507-528. https://doi.org/10.2478/IJNAOE-2013-0196
- Mansour, A.E., Howen, L., 1994. Probability-based ship structural safety analysis. J. Sh. Res. 38 (4), 329-339.
- MathWorks, 2014. Matlab User Guide R2014b. On line version at. www.mathworks.com.
- Ozguc, O., Barltrop, N.D., 2008. Analysis on the hull girder ultimate strength of a bulk carrier using simplified method based on an incremental-iterative approach. J. Offshore Mech. Arct. Eng. 130 (2).
- Paik, J.K., Thayamballi, A.K., Yang, S.H., 1998. Residual strength assessment of ships after collision and grounding. Mar. Technol. 35, 38-54.
- Paik, J.K., Frieze, P.A., 2001. Ship structural safety and reliability. Prog. Struct. Eng. Mater. 3, 198-210. https://doi.org/10.1002/pse.74
- Saydam, D., Frangopol, D.M., 2013. Performance assessment of damage ship hulls. Ocean Eng. 68, 65-76. https://doi.org/10.1016/j.oceaneng.2013.03.016
- Smith, M.J., Pegg, N.G., 2003. Automated assessment of ultimate hull girder strength. J. Offshore Mech. Arct. Eng. 125 (3).
- Sorensen, J.D., 2004. Notes in Structural Reliability Theory and Risk Analysis. Aalborg University, Denmark.
- Sprinthall, R.C., 2011. Basic Statistical Analysis, ninth ed. Pearson Education Group.
- Teixeira, A., 1997. Reliability of Marine Structures in the Context of Risk Based Design (MSc Thesis, University of Glasgow).
- VanDerHorn, E., Wang, G., 2011. A statistical study on the material properties of shipbuilding steels. In: Proceedings of the 14th International Congress of the International Maritime Association of the Mediterranean, Genoa, Italy, pp. 371-378.
- Vhanmane, S., Bhattacharya, B., 2011. Ultimate strength analysis of ship hull girder under random material and geometric properties. J. Offshore Mech. Arct. Eng. 133 (3).
- Wirsching, P.H., Ferensic, J., Thayamballi, A., 1997. Reliability with respect to ultimate strength of a corroding ship hull. Mar. Struct. 10, 501-518. https://doi.org/10.1016/S0951-8339(97)00009-9
- Zhu, B., Frangopol, D.M., 2013. Reliability assessment of ship structures using Bayesian updating. Eng. Struct. 56, 1836-1847. https://doi.org/10.1016/j.engstruct.2013.07.024
Cited by
- The ultimate strength characteristics on double hull oil tanker vol.575, pp.None, 2018, https://doi.org/10.1088/1755-1315/575/1/012195
- Progressive Collapse Analysis of Intact and Damaged Ships under Unsymmetrical Bending vol.8, pp.12, 2020, https://doi.org/10.3390/jmse8120988
- Post-accidental structural reliability of double-hull oil tanker with near realistic collision damage shapes vol.15, pp.suppl1, 2018, https://doi.org/10.1080/17445302.2020.1789035