DOI QR코드

DOI QR Code

Beam finite element model of a vibrate wind blade in large elastic deformation

  • Hamdi, Hedi (Applied Mechanics and Engineering Laboratory, National Engineering School of Tunis, University of Tunis El Manar) ;
  • Farah, Khaled (Civil Engineering Laboratory, National Engineering School of Tunis, University of Tunis El Manar)
  • 투고 : 2017.05.12
  • 심사 : 2017.12.28
  • 발행 : 2018.01.25

초록

This paper presents a beam finite element model of a vibrate wind blade in large elastic deformation subjected to the aerodynamic, centrifugal, gyroscopic and gravity loads. The gyroscopic loads applied to the blade are induced by her simultaneous vibration and rotation. The proposed beam finite element model is based on a simplex interpolation method and it is mainly intended to the numerical analysis of wind blades vibration in large elastic deformation. For this purpose, the theory of the sheared beams and the finite element method are combined to develop the algebraic equations system governing the three-dimensional motion of blade vibration. The applicability of the theoretical approach is elucidated through an original case study. Also, the static deformation of the used wind blade is assessed by appropriate software using a solid finite element model in order to show the effectiveness of the obtained results. To simulate the nonlinear dynamic response of wind blade, the predictor-corrector Newmark scheme is applied and the stability of numerical process is approved during a large time of blade functioning. Finally, the influence of the modified geometrical stiffness on the amplitudes and frequencies of the wind blade vibration induced by the sinusoidal excitation of gravity is analyzed.

키워드

참고문헌

  1. Ashrafi, Z.N., Ghaderi, M. and Sedaghat, A. (2015), "Parametric study on off-design aerodynamic performance of a horizontal axis wind turbine blade and proposed pitch control", Energ. Convers. Manage., 93, 349-356. https://doi.org/10.1016/j.enconman.2015.01.048
  2. Dai, J.C., Hu, Y.P., Liu, D.S. and Long, X. (2011), "Aerodynamic loads calculation and analysis for large scale wind turbine based on combining BEM modified theory with dynamic stall model", Renew. Energ., 36(3), 1095-1104. https://doi.org/10.1016/j.renene.2010.08.024
  3. Domnica, S.M., Ioan, C. and Ionut, T. (2016), "Structural optimization of composite from wind turbine blades with horizontal axis using finite element analysis", Procedia Technol., 22, 726-733. https://doi.org/10.1016/j.protcy.2016.01.031
  4. Dotti, F.E., Cortinez, V.H. and Reguera, F. (2016), "Non-linear dynamic response to simple harmonic excitation of a thinwalled beam with a breathing crack", Appl. Math. Model., 40(1), 451-467. https://doi.org/10.1016/j.apm.2015.04.052
  5. Ghasemi, A.R., Jahanshir, A. and Tarighat, M.H. (2014), "Numerical and analytical study of aeroelastic characteristics of wind turbine composite blades", Wind Struct., 18(2), 103-116. https://doi.org/10.12989/was.2014.18.2.103
  6. Habali, S.M. and Saleh, I.A. (2000a), "Local design, testing and manufacturing of small mixed airfoil wind turbine blades of glass fiber reinforced plastics: part I: design of the blade and root", Energ. Convers. Manage., 41(3), 249-280. https://doi.org/10.1016/S0196-8904(99)00103-X
  7. Habali, S.M. and Saleh, I.A. (2000b), "Local design, testing and manufacturing of small mixed airfoil wind turbine blades of glass fiber reinforced plastics: Part II: Manufacturing of the blade and rotor", Energ. Convers. Manage., 41(3), 281-298. https://doi.org/10.1016/S0196-8904(99)00104-1
  8. Hamdi, H., Mrad, C. and Nasri, R. (2012), "Effects of gyroscopic coupling on the dynamics of a wind turbine blade with horizontal axis", In Condition Monitoring of Machinery in Non- Stationary Operations, 159-174. Springer Berlin Heidelberg.
  9. Hamdi, H., Mrad, C., Hamdi, A. and Nasri, R. (2014), "Dynamic response of a horizontal axis wind turbine blade under aerodynamic, gravity and gyroscopic effects", Appl. Acoust., 86, 154-164. https://doi.org/10.1016/j.apacoust.2014.04.017
  10. Lee, J.W., Kim, J.K., Han, J.H. and Shin, H.K. (2013), "Active load control for wind turbine blades using trailing edge flap", Wind Struct., 16(3), 263-278. https://doi.org/10.12989/was.2013.16.3.263
  11. Ponta, F.L., Otero, A.D., Lago, L.I. and Rajan, A. (2016), "Effects of rotor deformation in wind-turbine performance: The dynamic rotor deformation blade element momentum model (DRD-BEM)", Renew. Energ., 92, 157-170. https://doi.org/10.1016/j.renene.2016.01.098
  12. Rao, S.S. and Gupta, R.S. (2001), "Finite element vibration analysis of rotating Timoshenko beams", J. Sound Vib., 242(1), 103-124. https://doi.org/10.1006/jsvi.2000.3362
  13. Rezaei, M.M., Behzad, M., Haddadpour, H. andMoradi, H. (2015), "Development of a reduced order model for nonlinear analysis of the wind turbine blade dynamics", Renew. Energ., 76, 264-282. https://doi.org/10.1016/j.renene.2014.11.021
  14. Staino, A. and Basu, B. (2013), "Dynamics and control of vibrations in wind turbines with variable rotor speed", Eng. Struct., 56, 58-67. https://doi.org/10.1016/j.engstruct.2013.03.014
  15. Stoykov, S. and Ribeiro, P. (2013), "Vibration analysis of rotating 3D beams by the p-version finite element method", Finite Elem. Anal. Des., 65, 76-88. https://doi.org/10.1016/j.finel.2012.10.008
  16. Wang, Y., Liang, M. and Xiang, J. (2014). << Damage detection method for wind turbine blades based on dynamics analysis and mode shape difference curvature information", Mech. Syst. Signal Pr., 48(1), 351-367. https://doi.org/10.1016/j.ymssp.2014.03.006