Advances in concrete construction

  • 제6권6호
  • /
  • Pages.631-643
  • /
  • 2018
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mechanical behaviour of steel fibre reinforced SCC after being exposed to fire

  • Ponikiewski, Tomasz (Silesian University of Technology, Faculty of Civil Engineering) ;
  • Katzer, Jacek (Koszalin University of Technology, Faculty of Civil Engineering Environment and Geodetic Sciences) ;
  • Kilijanek, Adrian (Silesian University of Technology, Faculty of Civil Engineering) ;
  • Kuzminska, Elzbieta (Koszalin University of Technology, Faculty of Civil Engineering Environment and Geodetic Sciences)
  • 투고 : 2018.09.03
  • 심사 : 2018.11.22
  • 발행 : 2018.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The focus of this paper is given to the investigation of mechanical properties of steel fibre reinforced self-compacting concrete after being exposed to fire. The research programme covered tests of two sets of beams: specimens subjected to fire and specimens not subjected to fire. The fire test was conducted in an environment mirroring one of possible real fire situations where concrete surface for an extended period of time is directly exposed to flames. Micro-cracking of concrete surface after tests was digitally catalogued. Compressive strength was tested on cube specimens. Flexural strength and equivalent flexural strength were tested according to RILEM specifications. Damages of specimens caused by spalling were assessed on a volumetric basis. A comparison of results of both sets of specimens was performed. Significant differences of all tested properties between two sets of specimens were noted and analysed. It was proved that the limit of proportionality method should not be used for testing fire damaged beams. Flexural characteristics of steel fibre reinforced self-compacting concrete were significantly influenced by fire. The influence of fire on properties of steel fibre reinforced self-compacting concrete was discussed.

키워드

참고문헌

  1. Abdallah, S., Fan, M. and Cashell, K. (2017), "Bond-slip behaviour of steel fibres in concrete after exposure to elevated temperatures", Constr. Build. Mater., 140, 542-551. https://doi.org/10.1016/j.conbuildmat.2017.02.148
  2. Arioz, O. (2009), "Retained properties of concrete exposed to high temperatures: Size effect", Fire Mater., 33, 211-222. https://doi.org/10.1002/fam.996
  3. Blesak, L., Goremikins, V., Wald, F. and Sajdlova, T. (2016), "Constitutive model of steel fibre reinforced concrete subjected to high temperatures", Acta Polytechnica, 56(6), 417. https://doi.org/10.14311/AP.2016.56.0417
  4. Bui, V.K., Geiker, M.R. and Shah, S.P. (2003), "Rheology of fiber reinforced cementitious materials", Eds. Naaman, A.E. and Reinhardt, H.W., Proceedings of HPFRCC4 Workshop, Ann Arbor, Cachan.
  5. Bywalski, C. and Kaminski, M. (2011), "Estimation of the bending stiffness of rectangular reinforced concrete beams made of steel fibre reinforced concrete", Arch. Civil Mech. Eng., 11(3), 553-571. https://doi.org/10.1016/S1644-9665(12)60101-0
  6. Cashell, K.A., Elghazouli, A.Y. and Izzuddin, B.A. (2010), "Ultimate behavior of idealized composite floor elements at ambient and elevated temperature", Fire Technol., 46(1), 67-89. https://doi.org/10.1007/s10694-009-0089-5
  7. Cichocki, K. and Ruchwa, M. (2015), "Distribution of damages in unconventionally reinforced concrete slabs subjected to impact loads", Proceedings of 3rd Polish Congress of Mechanics and 21st International Conference on Computer Methods in Mechanics, PCM-CMM-2015, Gdansk, Poland, September.
  8. Ding, Y., Zhang, C., Cao, M., Zhang, Y. and Azevedo, C. (2016), "Influence of different fibers on the change of pore pressure of self-consolidating concrete exposed to fire", Constr. Build. Mater., 113, 456-469. https://doi.org/10.1016/j.conbuildmat.2016.03.070
  9. Domski, J. (2016), "A blurred border between ordinary concrete and SFRC", Constr. Build. Mater., 112, 247-252. https://doi.org/10.1016/j.conbuildmat.2016.02.205
  10. Dugenci, O., Haktanir, T. and Altun, F. (2015), "Experimental research for the effect of high temperature on the mechanical properties of steel fiber-reinforced concrete", Constr. Build. Mater., 75, 82-88. https://doi.org/10.1016/j.conbuildmat.2014.11.005
  11. EFNARC (2002), Specification and Guidelines for Self-Compacting Concrete. European federation for Specialist Construction Chemicals and Concrete Systems, Norfolk, UK.
  12. fib Model Code 2010 (2010), First Complete Draft, International Federation for Structural Concrete (fib), Bulletin 55.
  13. Fike, R. and Kodur, V. (2011), "Enhancing the fire resistance of composite floor assemblies through the use of steel fiber reinforced concrete", Eng. Struct., 33, 2870-2878. https://doi.org/10.1016/j.engstruct.2011.06.011
  14. Firmo, J.P. and Correira, J.R. (2015), "Fire behaviour of thermally insulated RC beams strengthened with EBR-CFRP strips: Experimental study", Compos. Struct., 122, 144-154. https://doi.org/10.1016/j.compstruct.2014.11.063
  15. Guerrieri, M., Sanjayan, J. and Collins, F. (2009), "Residual compressive behavior of alkali-activated concrete exposed to elevated temperatures", Fire Mater., 33, 51-62. https://doi.org/10.1002/fam.983
  16. Hager, I., Tracz, T., Sliwinski, J. and Krzemien, K. (2015), "The influence of aggregate type on the physical and mechanical properties of high-performance concrete subjected to high temperature", Fire Mater., 40(5), 668-682. https://doi.org/10.1002/fam.2318
  17. Jameran, A., Ibrahim, I., Yazan, S. and Rahim, S. (2015), "Mechanical properties of steel-polypropylene fibre reinforced concrete under elevated temperature", Procedia Eng., 125, 818-824. https://doi.org/10.1016/j.proeng.2015.11.146
  18. Katzer, J. (2012), "Median diameter as a grading characteristic for fine aggregate cement composite designing", Constr. Build. Mater., 35, 884-887. https://doi.org/10.1016/j.conbuildmat.2012.04.050
  19. Katzer, J. and Kobaka, J. (2009), "Combined non-destructive testing approach to waste fine aggregate cement composites", Sci. Eng. Compos. Mater., 16(4), 277-284.
  20. Maidl, R.M. (1995), Steel Fibre Reinforced Concrete, Ernst & Sohn, Berlin, Germany.
  21. Martinie, L. and Roussel, N. (2011), "Simple tools for fiber orientation prediction in industrial practice", Cement Concrete Res., 41, 993-1000. https://doi.org/10.1016/j.cemconres.2011.05.008
  22. Okumura, H. and Ozawa, K. (1996), "Self-compactable high performance concrete in Japan", ACI Spec. Publ., 159, 31-44.
  23. Park, S., Yim, H. and Kwak, H. (2015), "Effects of post-fire curing conditions on the restoration of material properties of fire-damaged concrete", Constr. Build. Mater., 99, 90-98. https://doi.org/10.1016/j.conbuildmat.2015.09.015
  24. Ponikiewski, T. and Golaszewski, J. (2016), "X-ray investigation and strength measurement of steel fibre reinforced self-compacting concrete beams", Tran. VSB-Tech. Univ. Ostrava, Civil Eng. Ser., 16(2), 141-150. https://doi.org/10.1515/tvsb-2016-0025
  25. Ponikiewski, T. and Katzer, J. (2015), "X-ray computed tomography of fibre reinforced self-compacting concrete as a tool of assessing its flexural behaviour", Mater. Struct., 49(6), 2131-2140.
  26. Ponikiewski, T. and Katzer, J. (2016), "Fresh mix characteristics of self-compacting concrete reinforced by fibre", Periodica Polytechnica Civil Eng., 2016, paper 9008, DOI: 10.3311/PPci.9008.
  27. Ponikiewski, T., Katzer, J., Bugdol, M. and Rudzki, M. (2015), "X-ray computed tomography harnessed to determine 3D spacing of steel fibres in self compacting concrete (SCC) slabs", Constr. Build. Mater., 74, 102-108. https://doi.org/10.1016/j.conbuildmat.2014.10.024
  28. RILEM TC 162-TDF (2002), "Test and design methods for steel fibre reinforced concrete: bending test", Mater. Struct., 35, 262-2780.
  29. Simonova, H., Rozsypalova, I., Rovnanikova, P., Danek, P. and Kersner, Z. (2018), "Thermal analysis of concrete from panels subjected to fire experiments", Solid State Phenomena, 272, 47-52. https://doi.org/10.4028/www.scientific.net/SSP.272.47
  30. Simonova, H., Trcka, T., Bejcej, M., Rozsypalova, I., Danek, P. and Kersner, Z. (2018b), "Detailed determination of mechanical fracture parameters of concrete after fire experiments", Solid State Phenomena, 272, 220-225. https://doi.org/10.4028/www.scientific.net/SSP.272.220
  31. Tang, C.W. (2017), "Fire resistance of high strength fiber reinforced concrete filled box columns", Steel Compos. Struct., 23(5), 611-621. https://doi.org/10.12989/SCS.2017.23.5.611
  32. Taylor, R.P., Hosni, M.H., Garner, J.W. and Coleman, H.W. (1992), "Thermal boundary condition effects on heat transfer in turbulent rough-wall boundary layers", Wairme- und Stoffubertragung, 27, 131-140. https://doi.org/10.1007/BF01599926
  33. Yan, Z., Shen, Y., Zhu, H., Li, X. and Lu, Y. (2015), "Experimental investigation of reinforced concrete and hybrid fibre reinforced concrete shield tunnel segments subjected to elevated temperature", Fire Saf. J., 71, 86-99. https://doi.org/10.1016/j.firesaf.2014.11.009
  34. Zarzycki P.K., Katzer, J. and Domski, J. (2017), "Fast classification of fibres for concrete based on multivariate statistics", Comput. Concrete, 20(1), 23-29. https://doi.org/10.12989/CAC.2017.20.1.023