Advances in concrete construction

  • 제6권6호
  • /
  • Pages.561-583
  • /
  • 2018
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of PCE superplasticizers on rheological and strength properties of high strength self-consolidating concrete

  • Bauchkar, S.D. (Admixture Systems, BASF India Ltd.) ;
  • Chore, H.S. (Department of Civil Engineering, Dr. B.R. Ambedkar National Institute of Technology Jalandhar)
  • 투고 : 2018.04.26
  • 심사 : 2018.10.24
  • 발행 : 2018.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

A variety of polycarboxylate ether (PCE)-based superplasticizers are commercially available. Their influence on the rheological retention and slump loss in respect of concrete differ considerably. Fluidity and slump loss are the cardinal features responsible for the quality of concrete. These are related to the dispersion of cement particles and the hydration process which are greatly influenced by type of polycarboxylate ether (PCE)-based superplasticizers. On the backdrop of relatively less studies in the context of rheological retention of high strength self-consolidating concrete (HS-SCC), the experimental investigations were carried out aiming at quantifying the effect of the six different PCE polymers (PCE 1-6) on the rheological retention of HS-SCC mixes containing two types of Ordinary Portland Cements (OPC) and unwashed crushed sand as the fine aggregate. The tests that were carried out included $T_{500}$, V-Funnel, yield stress and viscosity retention tests. The supplementary cementitious materials such as fly ash (FA) and micro-silica (MS) were also used in ternary blend keeping the mix paste volume and flow of concrete constant. Low water to binder ratio was used. The results reveal that not only the PCEs of different polymer groups behave differently, but even the PCEs of same polymer groups also behave differently. The study also indicates that the HS-SCC mixes containing PCE 6 and PCE 5 performed better as compared to the mixes containing PCE 1, PCE 2, PCE 3 and PCE 4 in respect of all the rheological tests. The PCE 6 is a new class of chemical admixtures known as Polyaryl Ether (PAE) developed by BASF to provide better rheological properties in even in HS-SCC mixes at low water to binder mix. In the present study, the PCE 6, is found to help not only in reduction in the plastic viscosity and yield stress, but also provide good rheological retention over the period of 180 minutes. Further, the early compressive strength properties (one day compressive strength) highly depend on the type of PCE polymer. The side chain length of PCE polymer and the fineness of the cement considerably affect the early strength gain.

키워드

참고문헌

  1. Alonso, M.M., Palacios, M., Puertas, F., de la Torre, A.G. and Aranda, M.A.G. (2007), "Effect of polycarboxylate admixture structure on cement paste rheology", Mater. Const., 57(6), 65-81.
  2. ASTM C150 (2004), Standard Specification of Portland Cement, American Society for Testing and Materials Standard Practice, Philadelphi Pennsylvania USA.
  3. Aydin, S., Hilmi, A. and Ramyar, K. (2009), "Effects of fineness of cement on polynaphthalene sulfonate based superplasticizer-cement interaction", Constr. Build. Mater., 23(6), 2402-2408. https://doi.org/10.1016/j.conbuildmat.2008.10.004
  4. Banfill, P.F.G. (2006), "Rheology of fresh cement and concrete", Rheology Reviews, The British Society of Rheology, UK.
  5. Banfill, P.F.G. (1994), "Rheological methods for assessing the flow properties of mortar and related materials", Constr. Build. Mater., 8(1), 43-50. https://doi.org/10.1016/0950-0618(94)90007-8
  6. Banfill, P.F.G. and Saunders, D.C. (1981), "The viscometric examination of cement pastes", Cement Concrete Res., 11(2), 363-370. https://doi.org/10.1016/0008-8846(81)90108-3
  7. Banfill, P.F.G. (2003), "The rheology of fresh cements and concrete", Publication in Proceedings of 11th International Cement Chemistry Congress, Durban.
  8. Bauchkar, S.D. and Chore, H.S. (2014), "Rheological properties of self consolidating concrete with various mineral admixtures", Struct. Eng. Mech., 51(1), 1-13. https://doi.org/10.12989/SEM.2014.51.1.001
  9. Bauchkar, S.D. and Chore, H.S. (2017), "Experimental studies on rheological properties of smart dynamic concrete", Adv. Concrete Constr., 5(3), 183-199. https://doi.org/10.12989/acc.2017.5.3.183
  10. Bauchkar, S.D., Chore, H.S. and Mukherjee, S.K. (2017), "Rheological properties of Smart Dynamic Concrete (SDC) containing different supplementary Cementitious Materials", J. Struct. Eng. (JoSE), Struct. Eng. Res. Centr., 44(6), 1-12
  11. Chandra, S. and Bjornstrom, J. (2003), "Influence of superplasticizers type and dosage on the slump loss of Portland cement mortars-Part II", Cement Concrete Res., 32(10), 1613-1619. https://doi.org/10.1016/S0008-8846(02)00838-4
  12. EFNARC (2005), European Guidelines for SCC-2005, The European Federation of National Trade Associations (EFNARC), Specification and Guidelines for Self-Compacting Concrete, Association House, Farnham, UK.
  13. Felekoglu, B. and Sarkode, H. (2008), "Effect of chemical structure of polycarboxylate-based superplasticizers on workability retention of self-compacting concrete", Constr. Build. Mater., 22(9), 1972-1980. https://doi.org/10.1016/j.conbuildmat.2007.07.005
  14. Ferraris, C.F., Obla, K.H. and Hill, R. (2001), "The influence of mineral admixtures on the rheology of cement paste and concrete", Cement Concrete Res., 31(2), 245-255. https://doi.org/10.1016/S0008-8846(00)00454-3
  15. Feys, D., De Schutter, G.U., Khayat, K.H. and Ugent, R.V. (2016), "Changes in rheology of self-consolidating concrete induced by pumping", Mater. Struct., 49(11), 4657-4677. https://doi.org/10.1617/s11527-016-0815-7
  16. Flatt, R.J. and Houst, Y.F. (2001), "A simplified view on chemical effects perturbing the action of superplasticizers", Cement Concrete Res., 31(8), 1169-1176. https://doi.org/10.1016/S0008-8846(01)00534-8
  17. Heikal, M., Morsy, M.S. and Aiad, I. (2005), "Effect of treatment temperature on the early hydration characteristics of superplasticized silica fume blended cement pastes", Cement Concrete Res., 35(4), 680-687. https://doi.org/10.1016/j.cemconres.2004.06.012
  18. Hu, C. and de Larrard, F.R. (1996), "The rheology of fresh high-performance concrete", Cement Concrete Res., 26(2), 283-294. https://doi.org/10.1016/0008-8846(95)00213-8
  19. Huang, D.N. (1980), "Rheology and application science of cement", J. China Ceram. Soc., 3(4), 1-10. (in Chinese)
  20. Huang, D.N. and Xie, Y.S. (1984), "Rheological concepts of fresh concrete", J. China Ceram., 33(8), 35-39. (in Chinese)
  21. IS: 10262 (2009), Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standards, New Delhi.
  22. Jayashree, C. and Gettu, R. (2008), "Experimental study of the flow behavior of superplasticized cement paste", Mater. Struct., 41(9), 1581-1593. https://doi.org/10.1617/s11527-008-9350-5
  23. Jolicoeur, C. and Simard, M.A. (1998), "Chemical admixture-cement interactions: phenomenology and physico-chemical concepts", Cement Concrete Compos., 20(2), 87-101. https://doi.org/10.1016/S0958-9465(97)00062-0
  24. Kauppi, A., Banfill, P.F.G., Bowen, P., Petersen, B.G., Houst, Y.F., Lafuma, F., Maeder, U., Reknes, K., Schober, I. and Swift, D.S. (2003), "Improved superplasticizers for high performance concrete", Proceedings of the 11th Intetenational Cement Chemistry Congress, Durban.
  25. Kreppelt, F., Weibel, M., Zampini, D. and Romer, M. (2002), "Influence of solution chemistry on the hydration of polished clinker surfaces-a study of different types of polycarboxylic acid-based admixtures", Cement Concrete Res., 32(2), 187-190. https://doi.org/10.1016/S0008-8846(01)00654-8
  26. Kwan, A.K.H. and Ng, I.Y.T. (2009), "Optimum super plasticizer dosage and aggregate proportions for SCC", Mag. Concrete Res., 61(4), 281-292. https://doi.org/10.1680/macr.2008.00010
  27. Lewis, J.A., Matsuyama, H., Kirby, G., Morissette, S. and Young, J.F. (2000), "Polyelectrolyte effects on the rheological properties of concentrated cement suspensions", J. Am. Ceramic Soc., 83(8), 1905-1913. https://doi.org/10.1111/j.1151-2916.2000.tb01489.x
  28. Li, Q.H. and Kong, X.M. (2009), "Properties and microstructure of polymer modified mortar based on different acrylate latexes", J. Chinese Ceram. Soc., 37(1), 107-114.
  29. Lin, F. and Meyer, C. (2009), "Hydration kinetics modeling of Portland cement considering the effects of curing temperature and applied pressure", Cement Concrete Res., 39(4), 255-265. https://doi.org/10.1016/j.cemconres.2009.01.014
  30. Mollah, M.Y.A., Adams, W.J., Schennach, R. and Cocke, D.L. (2000) "A review of cement-uperplasticizers interactions and their models", Adv. Cement Res., 12(4), 153-161. https://doi.org/10.1680/adcr.2000.12.4.153
  31. Murata, J. (1984), "Flow and deformation of fresh concrete", Mater. Struct., 17(2), 117-129.
  32. Nawa, T. (1999), "The effects of chemical structure of superplasticizers on the fluidity of cement pastes and the hydration of cement", Konkuritou Ronbunshu, Semento, 53(4), 751-758. (in Japanese)
  33. Neubauer, C.M., Yang, M. and Jennings, H.M. (1998), "Inter-particle potential and sedimentation behaviour of cement suspensions: Effects of admixtures", Adv. Cement Bas. Mater., 8(1), 17-27. https://doi.org/10.1016/S1065-7355(98)00005-4
  34. Ohta, A., Sugiyama, T. and Tanaka, Y. (2000), "Superplasticizers and other chemical admixtures", Proceedings of 6th CANMET/ACI International Conference Superplasticizers and Other Chemical Admixtures in Concrete, SP-195, American Concrete Institute.
  35. Plank, J., Sachsenhauser, B. and de Reese, J. (2010), "Experimental determination of the thermodynamic parameters affecting the adsorption behaviour and dispersion effectiveness of PCE superplasticizers", Cement Concrete Res., 40(5), 699-709. https://doi.org/10.1016/j.cemconres.2009.12.002
  36. Plank, J., Vlad, D., Brandl, A. and Chatziagorastou, P. (2009), "Colloidal chemistry examination of the steric effect of polycarboxylate superplasticizers", Cement Int., 3(2), 100-110.
  37. Puertas, F., Santos, H., Palacios, M. and Martinez-Ramirez, S. (2005), "Polycarboxylate-type superplasticizer admixture: Effect on hydration, microstructure and rheology behaviour in cement paste", Adv. Cement Bas. Mater., 17(2), 77-89.
  38. Ramachandran, V.S. (1992), Super-Plasticizers Progress in Cement and Concrete, ABI Books (Part II), New Delhi, India.
  39. Ran, Q.P., Somasundaran, P. and Miao, C.W. (2009), "Effect of the length of the side chains of comb-like copolymer dispersants on dispersion and rheological properties of concentrated cement suspensions", J. Colloid Interf. Sci., 336(2), 624-633. https://doi.org/10.1016/j.jcis.2009.04.057
  40. Rechtie, A.G.B. (1962), "The triaxial testing of fresh concrete", Mag. Concrete Res., 14(4), 37-41. https://doi.org/10.1680/macr.1962.14.40.37
  41. Schwartzentruber, A. and Catherine, C. (2000), "Method of the concrete equivalent mortar (CEM)-A new tool to design concrete containing admixtures", Mater. Struct., 33(232), 475-482. https://doi.org/10.1007/BF02480524
  42. Struble, L. and Sun, G.K. (1995), "Viscosity of Portland cement paste as a function of concentration", Adv. Cement Bas. Mater., 2(2), 62-69. https://doi.org/10.1016/1065-7355(95)90026-8
  43. Tattersall, G.H. and Banfill, P.F.G. (1983), The Rheology of Fresh Concrete, Pitman Advance Publishing Program, University of Michigan, USA, 356.
  44. Uchikawa, H., Sawaki, D. and Hanehara, S. (1995), "Influence of kind and added timing of organic admixture on the composition, structure and property of fresh cement paste", Cement Concrete Res., 25(2), 353-364. https://doi.org/10.1016/0008-8846(95)00021-6
  45. Wallevik, O.H. (1990), "The rheology of fresh concrete and its application on concrete with and without silica fume", Ph.D. Thesis, (Unpublished), NTH Trondheim.
  46. Wallevik, O.H. and Wallevik, J.E. (2017), "Rheology as a tool in concrete science: the use of rheographs and workability boxes", Cement Concrete Res., 41(12), 1279-1288. https://doi.org/10.1016/j.cemconres.2011.01.009
  47. Winnefeld, F., Becker, S., Pakusch, J. and Gotz, T. (2006), "Polymer structure/concrete property relations of HRWRA", Proceedings of the 8th CANMET/ACI International Conference Recent Advances in Concrete Technology, Montreal.
  48. Winnefeld, F., Becker, S., Pakusch, J. and Gotz, T. (2007), "Effects of the molecular architecture of comb-shaped superplasticizers on their performance in cementitious systems", Cement Concrete Compos., 29(4), 251-262. https://doi.org/10.1016/j.cemconcomp.2006.12.006
  49. Yamada, K., Takahashi, T., Hanehara, S. and Matsuhisa, M. (2000), "Effect of chemical structure on the properties of polycarboxylate - type superplasticizer", Cement Concrete Res., 30(2), 197-201. https://doi.org/10.1016/S0008-8846(99)00230-6
  50. Yoshioka, K., Tazawa, W., Hawai, K. and Enohata, T. (2002), "Absorption characteristic of superplasticiser on cement component minerals", Cement Concrete Res., 32(10), 1507-1513. https://doi.org/10.1016/S0008-8846(02)00782-2
  51. Zhang, G., Li, G. and Li, Y. (2016), "Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement", Constr. Build. Mater., 126, 44-54. https://doi.org/10.1016/j.conbuildmat.2016.09.019
  52. Zhang, Y., Kong, X., Gao, L. and Wang, J. (2006), "Research on test method for workability of high flowability concrete", J. Build. Sci., 22(5), 51-55.

피인용 문헌

  1. Evaluation of 3D printability of cementitious materials according to thixotropy behavior vol.11, pp.2, 2021, https://doi.org/10.12989/acc.2021.11.2.141
  2. Utilization of sugarcane bagasse ash as cement-replacing materials for concrete pavement: an overview vol.6, pp.4, 2021, https://doi.org/10.1007/s41062-021-00539-4