DOI QR코드

DOI QR Code

병렬입력/직렬출력(PISO) 부스트 컨버터의 출력 전압 밸런싱 특성 해석

Analysis of Parallel-Input Series-Output(PISO) Boost Converter With Output Voltage Balancing Characteristic

  • Nam, Hyun-Taek (Dept. of Electrical Eng., Kyungpook National University) ;
  • Cha, Honnyong (School of Energy Eng., Kyungpook National University) ;
  • Kim, Heung-Geun (Dept. of Electrical Eng., Kyungpook National University)
  • 투고 : 2017.10.14
  • 심사 : 2018.01.03
  • 발행 : 2018.02.20

초록

In this study, the output voltage balancing characteristics of parallel-input series-output (PISO) boost converter is analyzed. The PISO boost converter is derived by combining two basic boost converters. In comparison with the conventional three-level boost converter, the PISO boost converter can balance the output voltages under an unbalanced load condition without requiring additional circuit components and control strategy. A 2 kW prototype converter is built and tested to verify the output voltage balancing characteristics of the PISO boost converter.

키워드

참고문헌

  1. X. Ruan, B. Li, Q. Chen, S. C. Tan, and C. K. Tse, “Fundamental considerations of three-level DC–DC converters: Topologies, Analyses, and Control,” IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 55, No. 11, pp. 3733-3743, Dec. 2008. https://doi.org/10.1109/TCSI.2008.927218
  2. J. R. Pinheiro, D. L. R. Vidor, and H. A. Grundling, "Dual output three-level boost power factor correction converter with unbalanced loads," Power Electronics Specialists Conf., Vol. l, pp. 733-739, Jun. 1996.
  3. R. Krishna, D. E. Soman, S. K. Kottayil, and M. Leijon, “Pulse delay control for capacitor voltage balancing in a three-level boost neutral point clamped inverter,” IET Power Electronics, Vol. 8, No. 2, pp. 268-277, 2015. https://doi.org/10.1049/iet-pel.2014.0103
  4. L. Tan, B. Wu, V. Yaramasu, S. Rivera, and X. Guo, "Effective voltage balance control for bipolar-dc-bus-fed EV charging station with three-level DC-DC fast charger," IEEE Trans. Ind. Electron., Vol. 63, No. 7, pp. 4031-4041, Jul. 2016. https://doi.org/10.1109/TIE.2016.2539248
  5. C. L. Xia, X. Gu, T. N. Shi, and Y. Yan, “Neutral-point potential balancing of three-level inverters in direct-driven wind energy conversion system,” IEEE Trans. Energy Convers., Vol. 26, No. 1, pp. 18–29, Mar. 2011. https://doi.org/10.1109/TEC.2010.2060487
  6. S. H. Yun, H. K. Kang, H. Cha, and H. G. Kim, “A non-isolated 3-level hig step-up boost converter with output voltage balancing,” Transactions of the Korean Institute of Power Electronics, Vol. 20, No. 5, pp. 464-470, Oct. 2015. https://doi.org/10.6113/TKPE.2015.20.5.464
  7. H. Kang and H. Cha, “A new non-isolated high voltage gain boost converter with inherent output voltage balancing,” IEEE Transactions on Industrial Electronics, Vol. 65, No. 3, pp. 2189-2198, Mar. 2018. https://doi.org/10.1109/TIE.2017.2736508
  8. X. Hu and C. Gong, “A high gain input-parallel output-series DC/DC converter with dual coupled inductors,” IEEE Transactions on Power Electronics, Vol. 30, No. 3, pp. 1306-1317, Mar. 2015. https://doi.org/10.1109/TPEL.2014.2315613
  9. Y. Yamamoto, T. Takiguchi, T. Sato, and H. Koizumi, "Two-phase interleaved bidirectional converter input-parallel output-series connection," International Conference on Power Electronics and ECCE (ICPE-ECCE) Asia, Seoul, pp. 301-308, Jun. 2015.
  10. F. Chen, Y. Huangfu, S. Zhuo, L. Xu, and D. Zhao, "Analysis and control of a high voltage ratio and low stress DC-DC converter for fuel cell applications," IEEE International Conference on Industrial Technology (ICIT), Toronto, ON, pp. 42-47, Mar. 2017.
  11. J. Chae, H. Cha, and H. G. Kim, "Analysis and design of two-phase zero-voltage switching bidirectional DC-DC converter using coupled inductor," 2014 IEEE International Conference on Industrial Technology (ICIT), Busan, pp. 301-306. Mar. 2014.