Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Efficient Brush Deburring Process for Valve Body of Auto Transmission

브러시 공정을 이용한 변속기 밸브바디의 효율적인 디버링 방법 개발

  • 배준경 (경남기술대학교 메카트로닉스공학과) ;
  • 안동현 (두산인프라코어 (주)) ;
  • 권병찬 (건국대학교 기계설계학과) ;
  • 고성림 (건국대학교 기계설계학과)
  • Received : 2018.01.05
  • Accepted : 2018.02.13
  • Published : 2018.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

The cleanability of machine parts is becoming increasingly important in the industrial field. In particular, cleanability is the most important factor in hydraulic products. The burr and chips are dominant factors of cleanability. If the burrs are not removed completely before the beginning of the machining stage, this will cause many problems, such as scratches and operation failure. Due to the complexity of the valve body itself, it is very difficult to use common deburring tools. In this study, a brush-like deburring tool was suggested and verified as a proper tool for removing the burrs and forming a proper edge shape through a real experiment. Various kinds of brush materials and process conditions were tested for proper deburring of the valve body. It was shown that the suggested method was successful for valve body deburring.

Keywords

References

  1. Park, H. Y., "Experimental study on improvement of deburring tool geometry and process for removing burrs of drill hole," A Thesis for a Master's degree, Konkuk University, Republic of Korea, 2011.
  2. Ko, S. L, "Understanding of Burr Technology and It's Trend," Journal of Mechanical Science and Technology, Vol. 146, No. 1, pp. 33-46, 1993.
  3. Kim, J. S., "Optimization and control of drilling burr formation of AISI 304L and AISI 4118 based on drilling burr control charts," International journal of machine tools & manufacture, Vol. 41, No. 7, pp. 923-936, 2001. https://doi.org/10.1016/S0890-6955(00)00131-0
  4. Kang, D. C., "A Study of Deburring using Electro-Chemical Method," Proceedings of the Korean Society for Technology of Plasticity Conference, pp. 217-220, 2001.
  5. Jeong, Y. H., "Deburring microfeatures using micro-EDM," Journal of materials processing technology, Vol. 209, No. 14, pp. 5399-5406, 2009. https://doi.org/10.1016/j.jmatprotec.2009.04.021
  6. Lee, S. H., D.A.Dornfeld, "Precision laser Deburring," Trans. Asme. J. Manufacturing Science and Engineering, Vol. 123, No. 4, pp. 601-608, 1999.
  7. Lee, S. W., "Deburring Technology Using Ultrasonic Vibration for part," in Celebration of the 60th Anniversary Proceedings of the KSME 2005 Spring Annual Meeting, pp. 1500-1503, 2005.
  8. An, D. H., "Characteristics according to the deburring method and tip shape in the main hole and intersection hole," Proceedings of KSPE 2013 Spring Conference, Vol. 1, pp. 251-252, 2010.

Cited by

  1. Automatic Design of Hot Air Process for Deburring of Blow Injection Molded Products vol.28, pp.4, 2019, https://doi.org/10.7735/ksmte.2019.28.4.232
  2. Magnetic Abrasive Finishing of Beta-Titanium Wire Using Multiple Transfer Movement Method vol.10, pp.19, 2020, https://doi.org/10.3390/app10196729