참고문헌
- Kwak, T. S., Ohmori, H. and Bae, W. B., "A study on searching method of molding condition to control the thickness reduction of optical lens in plastic injection molding process", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 21, No. 2, pp. 27-34, 2004.
- Choi, K. K., Hong, S. M. and Han, S. R., "Effect of Flow Pattern of Coolant for Injection Mold on the Deformation of Injection Molding", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14 No. 4, pp. 92-99, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.092
-
Rim, C. S., "The effect analysis of birefringence of plastic
$f{\theta}$ lens on the beam diameter", Journal of Optical Society of Korea, Vol. 11, No.2, pp.73-79, 2000. - Kwak, T. S. and Ohmori, H., "Verification for transcription of spherical radius and prediction of birefringence in injection molding optical lens", Journal of the Korean Society for Precision Engineering, Vol. 22, No. 6, pp,55-60, 2005.
- Hong, J. S., Park, S. R. and Lyu, M. Y., " Measurement of Residual Stress Using Photoelasticity and Computer Simulation of Optical Characteristics in a Transparent Injection Molded Article", Polymer(Korea), Vol. 35, No. 1, pp.1-6, 2011.
- Park, S. H., Kim, T. K. and Kwak, T. S., "Retardation Analysis of Plastic Optic Lens according to Injection Speed Variation", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp.93-98, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.093
- Lee, H. S., Jeon, W. T. and Kim, S. W., "Development of Plastic Lenses for High-Resolution Phone Camera by Injection-Compression Molding", Transactions of the Korean Society of Mechanical Engineers, A, Vol. 37, No. 1, pp.39-46, 2013. https://doi.org/10.3795/KSME-A.2013.37.1.039
- Lee, S. H., and Hur, J. W., "Effect of Design Parameters and Molding Temperature on Polymethyl Methacrylate Lens Warp", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 109-116, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.109