The Journal of Advanced Prosthodontics

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지
DOI QR코드

DOI QR Code

Metal-ceramic bond strength between a feldspathic porcelain and a Co-Cr alloy fabricated with Direct Metal Laser Sintering technique

  • Received : 2017.04.04
  • Accepted : 2017.05.29
  • Published : 2018.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

PURPOSE. The aim of the present study was to record the metal-ceramic bond strength of a feldspathic dental porcelain and a Co-Cr alloy, using the Direct Metal Laser Sintering technique (DMLS) for the fabrication of metal substrates. MATERIALS AND METHODS. Ten metal substrates were fabricated with powder of a dental Co-Cr alloy using DMLS technique (test group) in dimensions according to ISO 9693. Another ten substrates were fabricated with a casing dental Co-Cr alloy using classic casting technique (control group) for comparison. Another three substrates were fabricated using each technique to record the Modulus of Elasticity (E) of the used alloys. All substrates were examined to record external and internal porosity. Feldspathic porcelain was applied on the substrates. Specimens were tested using the three-point bending test. The failure mode was determined using optical and scanning electron microscopy. The statistical analysis was performed using t-test. RESULTS. Substrates prepared using DMLS technique did not show internal porosity as compared to those produced using the casting technique. The E of control and test group was $222{\pm}5.13GPa$ and $227{\pm}3GPa$, respectively. The bond strength was $51.87{\pm}7.50MPa$ for test group and $54.60{\pm}6.20MPa$ for control group. No statistically significant differences between the two groups were recorded. The mode of failure was mainly cohesive for all specimens. CONCLUSION. Specimens produced by the DMLS technique cover the lowest acceptable metal-ceramic bond strength of 25 MPa specified in ISO 9693 and present satisfactory bond strength for clinical use.

Keywords

References

  1. Bezzon OL, de Mattos Mda G, Ribeiro RF, Rollo JM. Effect of beryllium on the castability and resistance of ceramometal bonds in nickel-chromium alloys. J Prosthet Dent 1998;80: 570-4. https://doi.org/10.1016/S0022-3913(98)70034-4
  2. Willis HH, Florig HK. Potential exposures and risks from beryllium-containing products. Risk Anal 2002;22:1019-33. https://doi.org/10.1111/1539-6924.00267
  3. Al Jabbari YS. Physico-mechanical properties and prosthodontic applications of Co-Cr dental alloys: a review of the literature. J Adv Prosthodont 2014;6:138-45. https://doi.org/10.4047/jap.2014.6.2.138
  4. Alkmina LB, Araujo AA, Silval P. Microstructural evidence of beryllium in commercial dental Ni-Cr alloys. Mat Res 2014;17: 627-31. https://doi.org/10.1590/S1516-14392014005000018
  5. Chen WC, Teng FY, Hung CC. Characterization of Ni-Cr alloys using different casting techniques and molds. Mater Sci Eng C Mater Biol Appl 2014;35:231-8. https://doi.org/10.1016/j.msec.2013.11.014
  6. Henriques B, Soares D, Silva FS. Influence of preoxidation cycle on the bond strength of CoCrMoSi-porcelain dental composites. Mater Sci Engin: C 2012;32:2374-80. https://doi.org/10.1016/j.msec.2012.07.010
  7. Molina A, Echeverri D, Parra M, Castro IJ, Garzon H, Valencia CH, Olave G. Metallographic characterization of overdentures bars manufactured by over-castting abutments for dental implants. Rev Fac Odontol Univ Antioq 2013;25: 26-43.
  8. Atluri KR, Vallabhaneni TT, Tadi DP, Vadapalli SB, Tripuraneni SC, Averneni P. Comparative evaluation of metal-ceramic bond strengths of nickel chromium and cobalt chromium alloys on repeated castings: An in vitro study. J Int Oral Health 2014;6:99-103.
  9. Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dent Mater 2008;24: 1400-4. https://doi.org/10.1016/j.dental.2008.03.001
  10. van Noort R. The future of dental devices is digital. Dent Mater 2012;28:3-12. https://doi.org/10.1016/j.dental.2011.10.014
  11. Koutsoukis T, Zinelis S, Eliades G, Al-Wazzan K, Rifaiy MA, Al Jabbari YS. Selective laser melting technique of Co-Cr dental alloys: A review of structure and properties and comparative analysis with other available techniques. J Prosthodont 2015;24:303-12. https://doi.org/10.1111/jopr.12268
  12. Henriques B, Soares D, Silva FS. Microstructure, hardness, corrosion resistance and porcelain shear bond strength comparison between cast and hot pressed CoCrMo alloy for metal-ceramic dental restorations. J Mech Behav Biomed Mater 2012;12:83-92. https://doi.org/10.1016/j.jmbbm.2012.03.015
  13. Takaichi A, Suyalatu, Nakamoto T, Joko N, Nomura N, Tsutsumi Y, Migita S, Doi H, Kurosu S, Chiba A, Wakabayashi N, Igarashi Y, Hanawa T. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications. J Mech Behav Biomed Mater 2013;21:67-76. https://doi.org/10.1016/j.jmbbm.2013.01.021
  14. Al Jabbari YS, Koutsoukis T, Barmpagadaki X, Zinelis S. Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting. Dent Mater 2014;30:e79-88.
  15. Khaing MW, Fuh JYH, Lu L. Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts. J Mater Proces Technol 2001;113:269-72. https://doi.org/10.1016/S0924-0136(01)00584-2
  16. Simchi A. Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features. Mater Sci Engin: A 2006;428:148-58. https://doi.org/10.1016/j.msea.2006.04.117
  17. Akagi K, Okamoto Y, Matsuura T, Horibe T. Properties of test metal ceramic titanium alloys. J Prosthet Dent 1992;68: 462-7. https://doi.org/10.1016/0022-3913(92)90411-3
  18. Ban S, Anusavice KJ. Influence of test method on failure stress of brittle dental materials. J Dent Res 1990;69:1791-9. https://doi.org/10.1177/00220345900690120201
  19. ISO 9693. Metal-ceramic dental restorative systems, Second edition. International Organization for Standardization. Geneva, Switzerland: 1999.
  20. Ritter JE. Critique of test methods for lifetime predictions. Dent Mater 1995;11:147-51. https://doi.org/10.1016/0109-5641(95)80051-4
  21. Probster L, Maiwald U, Weber H. Three-point bending strength of ceramics fused to cast titanium. Eur J Oral Sci 1996;104:313-9. https://doi.org/10.1111/j.1600-0722.1996.tb00083.x
  22. Liu J, Chi S, Xu J, Wang Y, Zhan D. Effect of preparation methods on the metal-porcelain bond strength of Co-Cr alloys. Hua Xi Kou Qiang Yi Xue Za Zhi 2014;32:115-8.
  23. Bae EJ, Kim JH, Kim WC, Kim HY. Bond and fracture strength of metal-ceramic restorations formed by selective laser sintering. J Adv Prosthodont 2014;6:266-71. https://doi.org/10.4047/jap.2014.6.4.266
  24. Bae EJ, Kim HY, Kim WC, Kim JH. In vitro evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering. J Adv Prosthodont 2015;7:312-6. https://doi.org/10.4047/jap.2015.7.4.312
  25. Liu J, Liu Y, Sun R, Zhan DS, Wang YY. Metal-ceramic bond strength of Co-Cr alloy processed by selective laser melting. Zhonghua Kou Qiang Yi Xue Za Zhi 2013;48:170-2.
  26. Xiang N, Xin XZ, Chen J, Wei B. Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting. J Dent 2012;40:453-7. https://doi.org/10.1016/j.jdent.2012.02.006
  27. Wu L, Zhu H, Gai X, Wang Y. Evaluation of the mechanical properties and porcelain bond strength of cobalt-chromium dental alloy fabricated by selective laser melting. J Prosthet Dent 2014;111:51-5. https://doi.org/10.1016/j.prosdent.2013.09.011

Cited by

  1. A Comparative Assessment of Flexural Bond Strength of Ni–Cr Metal–Ceramic Alloy on Repeated Castings vol.9, pp.3, 2018, https://doi.org/10.5005/jp-journals-10019-1240
  2. Effect of Combined Surface Treatments on Surface Roughness and Resin Bond Strength to Y-TZP Ceramic and Nickel-Chromium Metal Alloy vol.37, pp.7, 2019, https://doi.org/10.1089/photob.2018.4590
  3. Effect of Bonding Agent on Metal‐Ceramic Bond Strength between Co‐Cr Fabricated with Selective Laser Melting and Dental Feldspathic Porcelain vol.28, pp.9, 2018, https://doi.org/10.1111/jopr.13058
  4. Simplified Acid Treatment Technique in Cobalt-Chromium Alloys: Effect on Metal-Ceramic Bond Strength vol.24, pp.6, 2018, https://doi.org/10.1590/1980-5373-mr-2021-0247
  5. Evaluation of Surface Roughness of a Ni-Cr Alloy Treated With the Nd/YAG Laser and the Sandblast Technique vol.12, pp.1, 2021, https://doi.org/10.34172/jlms.2021.69
  6. Glass‐ceramics in the CaO-MgO-Al 2 O 3 -SiO 2 system as potential dental restorative materials vol.18, pp.6, 2018, https://doi.org/10.1111/ijac.13836