Coupled systems mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Special issue on multiscale computations for solids and fluids

  • Ibrahimbegovic, Adnan (Universite de Technologie Compiegne - Sorbonne Universities, Laboratoire Roberval de Mecanique, Centre de Recherche Royallieu)
  • Received : 2017.08.13
  • Accepted : 2017.10.03
  • Published : 2018.02.25
⟨ Previous Next ⟩

Abstract

This special issue contains selected papers first presented in a short format at the $3^{rd}$ International Conference ECCOMAS MSF 2017-Multiscale Computations for Solids and Fluids, organized in Slovenian capital Ljubljana, September 20-22, 2017.

Keywords

References

  1. Du, P. and Ouahsine, A. (2017), "Hydrodynamics prediction of a ship in static and dynamic states", Coupled Syst. Mech., 6(4/5), 1-14. https://doi.org/10.12989/csm.2017.6.1.001
  2. El houcine, M., Mamouri, S. and Ibrahimbegovic, A. (2017), "A controlled destruction and progressive collapse of 2D reinforced concrete frames", Coupled Syst. Mech., 6(4/5), 1-23. https://doi.org/10.12989/csm.2017.6.1.001
  3. Hadzalic, E., Ibrahimbegovic, A. and Dolarevic, S. (2017), "Failure mechanisms in coupled soil-foundation systems", Coupled Syst. Mech., 6(4/5), 1-16. https://doi.org/10.12989/csm.2017.6.1.001
  4. Hadzalic, E., Ibrahimbegovic, A. and Nikolic, M. (2017), "Failure mechanisms in coupled poro-plastic medium", Coupled Syst. Mech., 6(4/5), 1-17. https://doi.org/10.12989/csm.2017.6.1.001
  5. Ibrahimbegovic, A. and Boujelben, A. "Long-term simulation of wind turbine structure for distributed loading describing long-term wind loads for preliminary design", Coupled Syst. Mech., 6(4/5), 1-23.
  6. Ibrahimbegovic, A., Brank, B. and Kozar, I. (2017), Proceedings ECCOMAS MSF 2017-Multiscale Computations for Solids and Fluids, University of Ljubljana, Slovenia.
  7. Kozar I., Toric-Mailc, N. and Rukavina, T. (2017), "Inverse model for pullout determination of steel fibers", Coupled Syst. Mech., 6(4/5), 1-13. https://doi.org/10.12989/csm.2017.6.1.001
  8. Kozar, I., Ibrahimbegovic, A. and Rukavina, T. (2017), "Material model for load rate sensitivity", Coupled Syst. Mech., 6(4/5), 1-24. https://doi.org/10.12989/csm.2017.6.1.001
  9. Krvavica, N., Kozar, I. and Ozanic N., (2017), "The relevance of turbulent mixing in estuarine numerical models for two-layer shallow water flow", Coupled Syst. Mech., 6(4/5), 1-16. https://doi.org/10.12989/csm.2017.6.1.001
  10. Lavrencic, M. and Brank, B. (2017), "Failure analysis of ribbed cross-laminated timber plates", Coupled Syst. Mech., 6(4/5), 1-15. https://doi.org/10.12989/csm.2017.6.1.001
  11. Mejak, G., (2017), "High concentration ratio approximation of linear effective properties of materials with cubic inclusions", Coupled Syst. Mech., 6(4/5), 1-18. https://doi.org/10.12989/csm.2017.6.1.001
  12. Moreno-Navarro, P., Ibrahimbegovic, A. and Perez-Aparicio, J.L. (2017), "Linear behavior for fully coupled thermo-electro-magneto-mechanic systems", Coupled Syst. Mech., 6(4/5), 1-20. https://doi.org/10.12989/csm.2017.6.1.001
  13. Nikolic, Z., Zivaljic, N. and Smoljanovic H. (2017), cInfluence of ductility classes on seismic response of reinforced concrete structures", Coupled Syst. Mech., 6(4/5), 1-20. https://doi.org/10.12989/csm.2017.6.1.001
  14. Sarfaraz S.M., Rosic B.V., Matthies H.G. and Ibrahimbegovic, A. (2017), "Stochastic upscaling via linear bayesian updating", Coupled Syst. Mech., 6(4/5), 1-25. https://doi.org/10.12989/csm.2017.6.1.001