Structural Engineering and Mechanics

  • 제68권6호
  • /
  • Pages.647-660
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of seismic collapse capacity of regular RC frames using nonlinear static procedure

  • 투고 : 2018.05.08
  • 심사 : 2018.11.01
  • 발행 : 2018.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The Incremental Dynamic Analysis (IDA) procedure is currently known as a robust tool for estimation of seismic collapse capacity. However, the procedure is time-consuming and requires significant computational efforts. Recently some simplified methods have been developed for rapid estimation of seismic collapse capacity using pushover analysis. However, a comparative review and assessment of these methods is necessary to point out their relative advantages and shortcomings, and to pave the way for their practical use. In this paper, four simplified pushover analysis-based methods are selected and applied on four regular RC intermediate moment-resisting frames with 3, 6, 9 and 12 stories. The accuracy and performance of the different simplified methods in estimating the median seismic collapse capacity are evaluated through comparisons with the results obtained from IDAs. The results show that reliable estimations of the summarized 50% fractile IDA curve are produced using SPO2IDA and MPA-based IDA methods; however, the accuracy of the results for 16% and 84% fractiles is relatively low. The method proposed by Shafei et al. appears to be the most simple and straightforward method which gives rise to good estimates of the median sidesway collapse capacity with minimum computational efforts.

키워드

참고문헌

  1. ACI Committee 318 (2011), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  2. Adam, C. and Jager, C. (2012), "Simplified collapse capacity assessment of earthquake excited regular frame structures vulnerable to P-delta", Eng. Struct., 44, 159-173. https://doi.org/10.1016/j.engstruct.2012.05.036
  3. ASCE-41 (2013), Seismic Evaluation and Upgrade of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, U.S.A.
  4. ASCE-7 (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston, Virginia, U.S.A.
  5. Bernal, D. (1998), "Instability of buildings during seismic response", Eng. Struct., 20(4-6), 496-502. https://doi.org/10.1016/S0141-0296(97)00037-0
  6. Challa, V.R.M. and Hall, J.F. (1994), "Earthquake collapse analysis of steel frames", Earthq. Eng. Struct. Dyn., 23(11), 1199-1218. https://doi.org/10.1002/eqe.4290231104
  7. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582. https://doi.org/10.1002/eqe.144
  8. Elwood, K.J. (2002), "Shake table tests and analytical studies on the gravity load collapse of reinforced concrete frames", Ph.D. Dissertation, University of California at Berkeley, California, U.S.A.
  9. FEMA-P695 (2009), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, U.S.A.
  10. FEMA 440 (2005), Improvement of Nonlinear Static Seismic Procedures, Federal Emergency Management Agency, Washington, U.S.A.
  11. Ghasemi, S.H. and Nowak, A.S. (2017), "Reliability index for non-normal distributions of limit state functions", Struct. Eng. Mech., 62(3), 365-372. https://doi.org/10.12989/SEM.2017.62.3.365
  12. Goulet, C.A., Haselton, C.B., Mitrani-Reiser, J., Beck, J.L., Deierlein, G.G., Porter, K.A. and Stewart, J.P. (2007), "Evaluation of the seismic performance of a code-conforming reinforced-concrete frame building-from seismic hazard to collapse safety and economic losses", Earthq. Eng. Struct. Dyn., 36(13), 1973-1997. https://doi.org/10.1002/eqe.694
  13. Hamidia, M., Filiatrault, A. and Aref, A. (2013), "Simplified seismic sidesway collapse analysis of frame buildings", Earthq. Eng. Struct. Dyn., 43(3), 429-448. https://doi.org/10.1002/eqe.2353
  14. Han, S.W. and Chopra, A.K. (2006), "Approximate incremental dynamic analysis using the modal pushover analysis procedure", Earthq. Eng. Struct. Dyn., 35(15), 1853-1873. https://doi.org/10.1002/eqe.605
  15. Han, S.W., Moon, K.H. and Chopra, A.K. (2010), "Application of MPA to estimate probability of collapse of structures", Earthq. Eng. Struct. Dyn., 39(11), 1259-1278. https://doi.org/10.1002/eqe.992
  16. Haselton, C.B. and Deierlein, G.G. (2007), Assessing Seismic Collapse Safety of Modern Reinforced Concrete Moment-Frame Buildings, Report No. 156, Stanford University, California, U.S.A.
  17. Haselton, C.B., Liel, A.B., Lange, S.T. and Deierlein, G.G. (2007), Beam-Column Element Model Calibrated for Predicting Flexural Response Leading to Global Collapse of RC Frame Buildings, Report No. 3, Pacific Earthquake Engineering Research Center, University of California at Berkeley, California, U.S.A.
  18. Ibarra, L. and Krawinkler, H. (2011), "Variance of collapse capacity of SDOF systems under earthquake excitations", Earthq. Eng. Struct. Dyn., 40(12), 1299-1314. https://doi.org/10.1002/eqe.1089
  19. Ibarra, L., Medina, R. and Krawinkler, H. (2002), "Collapse assessment of deteriorating SDOF systems", Proceedings of the 12th European Conference on Earthquake Engineering, London, United King down, September.
  20. Ibarra, L.F. and Krawinkler, H. (2005), Global Collapse of Frame Structures under Seismic Excitations, Report No. 152, Stanford University, California, U.S.A.
  21. Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. Dyn., 34(12), 1489-1511. https://doi.org/10.1002/eqe.495
  22. Kabeyasawa, T. and Sanada, Y. (2001), "Shaking table test and analysis of a reinforced concrete wall-frame building with softfirst story", Proceedings of the Slovenia-Japan Workshops on Performance-based Seismic Design Methodologies, Ljubljana, Slovenia, October.
  23. Kanvinde, A.M. (2003), Methods to Evaluate the Dynamic Stability of Structures-Shake Table Tests and Nonlinear Dynamic Analyses, Winner EERI Annual Student Paper Competition, Earthquake Engineering Research Institute, California, U.S.A.
  24. Liel, A. and Tuwair, H. (2010), "A practical approach for assessing structural resistance to earthquake-induced collapse", Proceedings of the 19th Analysis and Computation Specialty Conference, Florida, U.S.A., May.
  25. Lignos, D.G., Krawinkler, H. and Whittaker, A.S. (2011), "Prediction and validation of sidesway collapse of two scale models of a 4-story steel moment frame", Earthq. Eng. Struct. Dyn., 40(7), 807-825. https://doi.org/10.1002/eqe.1061
  26. Lu, X., Lu, X., Guan, H. and Ye, L. (2013), "Collapse simulation of reinforced concrete high-rise building induced by extreme earthquakes", Earthq. Eng. Struct. Dyn., 42(5), 705-723. https://doi.org/10.1002/eqe.2240
  27. MacRae, G.A. (1994), "P-${\Delta}$ effects on single-degree-of-freedom structures in earthquakes", Earthq. Spectr., 10(3), 539-568. https://doi.org/10.1193/1.1585788
  28. Martin, S.C. and Villaverde, R. (1996), "Seismic collapse of steel frame structures", Proceedings of the 11th World Conference on Earthquake Engineering, Acapulco, Mexico, June.
  29. Medina, R.A. and Krawinkler, H. (2003), Seismic Demands for Non-Deteriorating Frame Structures and Their Dependence on Ground Motions, Report No. 144, Stanford University, California, U.S.A.
  30. Mehanny, S.S.F. and Deierlein, G.G. (2001), "Seismic damage and collapse assessment of composite moment frames", J. Struct. Eng., 127(9), 1045-1053. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1045)
  31. Miranda, E. and Akkar, D. (2003), "Dynamic instability of simple structural systems", J. Struct. Eng., 129(12), 1722-1726. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1722)
  32. Moon, K.H., Han, S.W. and Lee, T.S. and Seok, S.W. (2012), "Approximate MPA-based method for performing incremental dynamic analysis", Nonlin. Dyn., 67(4), 2865-2888. https://doi.org/10.1007/s11071-011-0195-z
  33. Open System for Earthquake Engineering Simulation (OpenSees) (2007), Version 2.1.0. Pacific Earthquake Engineering Research Center, .
  34. Perus, I., Klinc, R., Dolenc, M. and Dolsek, M. (2012), "A webbased methodology for the prediction of approximate IDA curves", Earthq. Eng. Struct. Dyn., 42(1), 43-60. https://doi.org/10.1002/eqe.2192
  35. Rodgers, J. and Mahin, S. (2006), "Effects of connection fractures on global behavior of steel moment frames subjected to earthquakes", J. Struct. Eng., 132(1), 78-88. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:1(78)
  36. Shafei, B., Zareian, F. and Lignos, D.G. (2011), "A simplified method for collapse capacity assessment of moment-resisting frame and shear wall structural systems", Eng. Struct., 33(4), 1107-1116. https://doi.org/10.1016/j.engstruct.2010.12.028
  37. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141
  38. Vamvatsikos, D. and Cornell, C.A. (2005), "Direct estimation of seismic demand and capacity of multi-degree-of-freedom systems through incremental dynamic analysis of single degree of freedom approximation", J. Struct. Eng., 131(4), 589-599. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:4(589)
  39. Villaverde, R. (2007), "Methods to assess the seismic collapse capacity of building structures: state of the art", J. Struct. Eng., 133(1), 57-66. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(57)
  40. Williamson, E.B. (2003), "Evaluation of damage and P-${\Delta}$ effects for systems under earthquake excitation", J. Struct. Eng., 129(8), 1036-1046. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1036)
  41. Yang, T.W. and Tasnimi, A.A. (2016), "Influence of concurrent horizontal and vertical ground excitations on the collapse margins of non-ductile RC frame buildings", Struct. Eng. Mech., 59(4), 653-669. https://doi.org/10.12989/sem.2016.59.4.653
  42. Yavari, S. and Elwood, K.J. (2009), "Collapse of a nonductile concrete frame: Evaluation of analytical models", Earthq. Eng. Struct. Dyn., 38(2), 225-241. https://doi.org/10.1002/eqe.855
  43. Zareian, F. and Krawinkler, H. (2009), Simplified Performance-Based Earthquake Engineering, Report No. 169, Stanford University, California, U.S.A.

피인용 문헌

  1. Three-field mixed beam-column finite element for geometric and material nonlinear analysis vol.79, pp.2, 2021, https://doi.org/10.12989/sem.2021.79.2.211