Steel and Composite Structures

  • 제29권5호
  • /
  • Pages.647-657
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The effects of temperature and vacancy defect on the severity of the SLGS becoming anisotropic

  • Tahouneh, Vahid (School of Mechanical Engineering, College of Engineering, University of Tehran) ;
  • Naei, Mohammad Hasan (School of Mechanical Engineering, College of Engineering, University of Tehran) ;
  • Mashhadi, Mahmoud Mosavi (School of Mechanical Engineering, College of Engineering, University of Tehran)
  • 투고 : 2018.08.29
  • 심사 : 2018.11.15
  • 발행 : 2018.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

Geometric imperfections may be created during the production process or setting borders of single-layer graphene sheets (SLGSs). Vacancy defects are an instance of geometric imperfection, so investigating the effect of these vacancies on the mechanical properties of single-layer graphene is extremely important. Since very few studies have been conducted on the structure of imperfect graphene (with the vacancy defect) as an anisotropic structure, further study of this defective structure seems imperative. Due to the vacancy defects and for the proper assessment of mechanical properties, the graphene structure should be considered anisotropic in certain states. The present study investigates the effects of site and size of vacancy defects on the mechanical properties of graphene as an anisotropic structure using the lekhnitskii interaction coefficients and Molecular Dynamic approach. The effect of temperature on the severity of the SLGS becoming anisotropic is also investigated in this study. The results reveal that the amount of temperature has a big effect on the severity of the structure getting anisotropic even for a graphene without any defects. The effect of aspect ratio, temperature and also size and site of vacancy defects on the material properties of the graphene are studied in this research work. According to the present study, using material properties of flawless graphene for imperfect structure can lead to inaccurate results.

키워드

참고문헌

  1. Allahkarami, F., Nikkhah-bahrami, M. and Ghassabzadeh Saryazdi, M. (2017), "Damping and vibration analysis of viscoelastic curved microbeam reinforced with FG-CNTs resting on viscoelastic medium using strain gradient theory and DQM", Steel Compos. Struct., Int. J., 25(2), 141-155.
  2. Allahkarami, F., Nikkhah-bahrami, M. and Ghassabzadeh Saryazdi, M. (2018), "Nonlinear forced vibration of FG-CNTs-reinforced curved microbeam based on strain gradient theory considering out-of-plane motion", Steel Compos. Struct., Int. J., 26(6), 673-691.
  3. Bu, H., Chen, Y., Zou, M., Yi, H., Bi, K. and Ni, Z. (2009), "Atomistic simulations of mechanical properties of graphene nanoribbons", Phys. Lett. A, 373(37), 3359-3362. https://doi.org/10.1016/j.physleta.2009.07.048
  4. Dai, H. (2002), "Carbon Nanotubes: Synthesis, Integration, and Properties", Acc. Chem. Res., 35(12), 1035-1044. https://doi.org/10.1021/ar0101640
  5. Georgantzinos, S.K., Giannopoulos, G.I. and Anifantis, N.K. (2010), "Numerical investigation of elastic mechanical properties of graphene structures", Mater. Des., 31(10), 4646-4654. https://doi.org/10.1016/j.matdes.2010.05.036
  6. Iijima, S. (1991), "Helical microtubules of graphitic carbon", Nature, 354, 56-58. https://doi.org/10.1038/354056a0
  7. Jalali, S.K., Jomehzadeh, E. and Pugno, N.M. (2016), "Influence of out-of-plane defects on vibration analysis of graphene: Molecular Dynamics and Non-local Elasticity approaches", Superlattices Microstruct., 91, 331-344. https://doi.org/10.1016/j.spmi.2016.01.023
  8. Jiang, J.W., Wang, J.S. and Li, B. (2009), "Young's modulus of graphene: A molecular dynamics study", Phys. Rev. B, 80(11), 113405-113408. https://doi.org/10.1103/PhysRevB.80.113405
  9. Kumar, D. and Srivastava, A. (2016), "Elastic properties of CNTand graphene-reinforced nanocomposites using RVE", Steel Compos. Struct., Int. J., 21(5), 1085-1103. https://doi.org/10.12989/scs.2016.21.5.1085
  10. Kvashnin, A.G., Sorokin, P.B., Kvashnin, D.G. (2010), "The Theoretical Study of Mechanical Properties of Graphene Membranes", Fuller. Nanotubes Carbon Nanostruct., 18(4-6), 497-500. https://doi.org/10.1080/1536383X.2010.488160
  11. Lee, C., Wei, X.D., Kysar, J.W. and Hone, J. (2008), "Measurement of the elastic properties and intrinsic strength of monolayer graphene", Science, 321(5887), 385-388. https://doi.org/10.1126/science.1157996
  12. Lekhnitskii, S.G. (1963), "Theory of elasticity of an anisotropic elastic body", Phys. Today, 17, 84 p.
  13. Liu, F., Ming, P. and Li, J. (2007), "Ab initio calculation of ideal strength and phonon instability of graphene under tension", Phys. Rev. B, 76(6), 064120-064127. https://doi.org/10.1103/PhysRevB.76.064120
  14. Ma, J., Alfe, D., Michaelides, A. and Wang, E. (2009), "Stone-Wales defects in graphene and other planar sp 2 -bonded materials", Phys. Rev. B, 80, 1-4.
  15. Marin, M. (1997), "Cesaro means in thermoelasticity of dipolar bodies", Acta Mechanica, 122(1-4), 155-168. https://doi.org/10.1007/BF01181996
  16. Marin, M. (2008), "Weak Solutions in Elasticity of Dipolar Porous Materials", Math. Probl. Eng., 1-8. DOI: http://dx.doi.org/10.1155/2008/158908
  17. Marin, M. (2010), "Some estimates on vibrations in thermoelasticity of dipolar bodies", J. Vib. Control, 16(1), 33-47. https://doi.org/10.1177/1077546309103419
  18. Marin, M. (2016), "An approach of a heat-flux dependent theory for micropolar porous media", Meccanica, 51(5), 1127-1133. https://doi.org/10.1007/s11012-015-0265-2
  19. Marin, M. and Ochsner, A. (2017), "The effect of a dipolar structure on the Holder stability in Green-Naghdi thermoelasticity", Continu. Mech. Thermodyn., 29(6), 1365-1374. https://doi.org/10.1007/s00161-017-0585-7
  20. Moradi-Dastjerdi, R. and Momeni-Khabisi, H. (2016), "Dynamic analysis of functionally graded nanocomposite plates reinforced by wavy carbon nanotube", Steel Compos. Struct., Int. J., 22(2), 277-299. https://doi.org/10.12989/scs.2016.22.2.277
  21. Moradi-Dastjerdi, R. and Payganeh, G. (2017a), "Thermoelastic dynamic analysis of wavy carbon nanotube reinforced cylinders under thermal loads", Steel Compos. Struct., Int. J., 25(3), 315-326.
  22. Moradi-Dastjerdi, R. and Payganeh, G. (2017b), "Transient heat transfer analysis of functionally graded CNT reinforced cylinders with various boundary conditions", Steel Compos. Struct., Int. J., 24(3), 359-367.
  23. Navarro, C.G., Weitz, R.T., Bittner, A.M., Scolari, M., Mews, A., Burghard, M. and Kern, K. (2007), "Electronic transport properties of individual chemically reduced graphene oxide sheets", Nano Lett., 7(11), 3499-3503. https://doi.org/10.1021/nl072090c
  24. Neek-Amal, M. and Peeters, F.M. (2010), "Linear reduction of stiffness and vibration frequencies in defected circular monolayer graphene", Phys. Rev. B, 81(23), 235437. https://doi.org/10.1103/PhysRevB.81.235437
  25. Ni, Z., Bu, H., Zou, M., Yi, H., Bi, K. and Chen, Y. (2010), "Anisotropic mechanical properties of graphene sheets from molecular dynamics", Physica B, 405(5), 1301-1306. https://doi.org/10.1016/j.physb.2009.11.071
  26. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells-Theory and Analysis, (Second Edition), CRC Press.
  27. Reddy, C.D., Rajendran, S. and Liew, K.M. (2006), "Equilibrium configuration and continuum elastic properties of finite sized graphene", Nanotechnology, 17(3), 864-870. https://doi.org/10.1088/0957-4484/17/3/042
  28. Sakhaee-Pour, A. (2009), "Elastic properties of single-layered graphene sheet", Solid State Commun., 149(1), 91-95. https://doi.org/10.1016/j.ssc.2008.09.050
  29. Shen, L., Shen, H.S. and Zhang, C.L. (2010), "Temperature-dependent elastic properties of single layer graphene sheets", Mater. Des., 31, 4445-4449. https://doi.org/10.1016/j.matdes.2010.04.016
  30. Soleimani, A., Naei, M.H. and Mosavi Mashhadi, M. (2017), "Nonlocal postbuckling analysis of graphene sheets with initial imperfection based on first order shear deformation theory", Results in Phys., 7, 1299-1307. https://doi.org/10.1016/j.rinp.2017.03.003
  31. Stankovich, S., Dikin, D.A., Dommett, G.H., Kohlhaas, K.M., Zimney, E.J., Stach, E.A., Piner, R.D., Nguyen, S.T. and Ruoff, R.S. (2006), "Graphene-based composite materials", Nature, 442(7100), 282-286. https://doi.org/10.1038/nature04969
  32. Sun, X., Fu, Z. and Xia, M. (2014), "Effects of vacancy defect on the tensile behavior of graphene", Theor. Appl. Mech. Lett., 4(5), 51002. https://doi.org/10.1063/2.1405102
  33. Sun, X.Y., Hu, H., Caob, C. and Xua, Y.J. (2015), "Anisotropic vacancy-defect-induced fracture strength loss of graphene", RSC Adv., 5(2), 13623-13627. https://doi.org/10.1039/C4RA14044C
  34. Tahouneh, V. (2016), "Using an equivalent continuum model for 3D dynamic analysis of nanocomposite plates", Steel Compos. Struct., Int. J., 20(3), 623-649. https://doi.org/10.12989/scs.2016.20.3.623
  35. Tahouneh, V. (2017), "Effects of CNTs waviness and aspect ratio on vibrational response of FG-sector plate", Steel Compos. Struct., Int. J., 25(6), 649-661.
  36. Tahouneh, V., Mosavi Mashhadi, M. and Naei, M.H. (2016), "Finite element and micromechanical modeling for investigating effective material properties of polymer-matrix nanocomposites with microfiber, reinforced by CNT arrays", Int. J. Adv. Struct. Eng., 8(3), 297-306. https://doi.org/10.1007/s40091-016-0132-y
  37. Tornabene, F., Fantuzzi, N., Ubertini, F. and Viola, E. (2015), "Strong formulation finite element method based on differential quadrature: a survey", Appl. Mech. Rev., 67(2), 1-55.
  38. Tornabene, F., Bacciocchi, M., Fantuzzi, N. and Reddy, J.N. (2018), "Multiscale approach for three-phase CNT/polymer/ fiber laminated nanocomposite structures", Polym. Compos. [In Press] DOI: 10.1002/pc.24520
  39. Tsai, J.L. and Tu, J.F. (2010), "Characterizing mechanical properties of graphite using molecular dynamics simulation", Mater. Des., 31(1), 194-199. https://doi.org/10.1016/j.matdes.2009.06.032
  40. Udupa, A. and Martini, A. (2011), "Model predictions of shear strain-induced ridge defects in graphene", Carbon, 49(11), 3571-3578. https://doi.org/10.1016/j.carbon.2011.04.057
  41. Wu, Y., Yin, J., Xie, W., Zhang, W., Wu, B., Jiang, Y. and Zhang, P. (2015), "Effect of vacancy distribution on the relaxation properties of graphene : A molecular dynamics study", IET Micro. Nano Lett., 10(12), 693-695. https://doi.org/10.1049/mnl.2015.0266
  42. Xie, G., Shen, Y., Wei, X., Yang, L., Xiao, H., Zhong, J. and Zhang, G. (2014), "A bond-order theory on the phonon scattering by vacancies in two-dimensional materials", Electron. Spintron. devices, 1-23.
  43. Yakobson, B.I., Brabec, C.J. and Bernholc, J. (1996), "Nanomechanics of Carbon Tubes: Instabilities beyond Linear Response", Phys. Rev. Lett., 76, 2511-2514. https://doi.org/10.1103/PhysRevLett.76.2511
  44. Yanovsky, Y.G., Nikitina, E.A., Karnet, Y.N. and Nikitin, S.M. (2009), "Quantum Mechanics Study of the Mechnism of Deformation and Fracture of Graphene", Phys. Mesomech., 12, 254-262. https://doi.org/10.1016/j.physme.2009.12.007
  45. Zhang, Y., Chen, Y., Zhou, K. and Liu, C. (2009), "Improving gas sensing properties of graphene by introducing dopants and defects : a first-principles study", Nanotechnology, 20(18), 185504. https://doi.org/10.1088/0957-4484/20/18/185504

피인용 문헌

  1. Influence of vacancy defects on vibration analysis of graphene sheets applying isogeometric method: Molecular and continuum approaches vol.34, pp.2, 2020, https://doi.org/10.12989/scs.2020.34.2.261