DOI QR코드

DOI QR Code

Transient vibration analysis of FG-MWCNT reinforced composite plate resting on foundation

  • Kumar, Puneet (Department of Mechanical Engineering, National Institute of Technology Rourkela) ;
  • Srinivas, J. (Department of Mechanical Engineering, National Institute of Technology Rourkela)
  • 투고 : 2017.09.24
  • 심사 : 2018.11.16
  • 발행 : 2018.12.10

초록

This paper aims to investigate the transient vibration behavior of functionally graded carbon nanotube (FG-CNT) reinforced nanocomposite plate resting on Pasternak foundation under pulse excitation. The plate is considered to be composed of matrix material and multi-walled carbon nanotubes (MWCNTs) with distribution as per the functional grading concept. The functionally graded distribution patterns in nanocomposite plate are explained more appropriately with the layer-wise variation of carbon nanotubes weight fraction in the thickness coordinate. The layers are stacked up in such a way that it yields uniform and three other types of distribution patterns. The effective material properties of each layer in nanocomposite plate are obtained by modified Halpin-Tsai model and rule of mixtures. The governing equations of an illustrative case of simply-supported nanocomposite plate resting on the Pasternak foundation are derived from third order shear deformation theory and Navier's solution technique. A converge transient response of nanocompiste plate under uniformly distributed load with triangular pulse is obtained by varying number of layer in thickness direction. The validity and accuracy of the present model is also checked by comparing the results with those available in literature for isotropic case. Then, numerical examples are presented to highlight the effects of distribution patterns, foundation stiffness, carbon nanotube parameters and plate aspect ratio on the central deflection response. The results are extended with the consideration of proportional damping in the system and found that nanocomposite plate with distribution III have minimum settling time as compared to the other distributions.

키워드

참고문헌

  1. Ansari, R. and Gholami, R. (2016), "Nonlinear primary resonance of third-order shear deformable functionally graded nanocomposite rectangular plates reinforced by carbon nanotubes", Compos. Struct., 154, 707-723. https://doi.org/10.1016/j.compstruct.2016.07.023
  2. Ansari, R., Hasrati, E., Faghih Shojaei, M., Gholami, R. and Shahabodini, A. (2015), "Forced vibration analysis of functionally graded carbon nanotube-reinforced composite plates using a numerical strategy", Phys. E: Low-Dimens. Syst. Nanostruct., 69, 294-305. https://doi.org/10.1016/j.physe.2015.01.011
  3. Arasteh, R., Omidi, M., Rousta, A.H.A. and Kazerooni, H. (2011), "A study on effect of waviness on mechanical properties of multi-walled carbon nanotube/epoxy composites using modified Halpin-Tsai theory", J. Macromol. Sci. Part B, 50(12), 2464-2480. https://doi.org/10.1080/00222348.2011.579868
  4. Bayat, M.R., Rahmani, O. and Mosavi Mashhadi, M. (2016), "Nonlinear low-velocity impact analysis of functionally graded nanotube-reinforced composite cylindrical shells in thermal environments", Polym. Compos., 39(3), 730-745. DOI: 10.1002/pc.23990
  5. Chavan, S.G. and Lal, A. (2017), "Bending behavior of SWCNT reinforced composite plates", Steel Compos. Struct., Int. J., 24(5), 537-548.
  6. Ebrahimi, F. and Habibi, S. (2017), "Low-velocity impact response of laminated FG-CNT reinforced composite plates in thermal environment", Adv. Nano Res., Int. J., 5(2), 69-97.
  7. Feng, C., Kitipornchai, S. and Yang, J. (2017), "Nonlinear free vibration of functionally graded polymer composite beams reinforced with graphene nanoplatelets (GPLs)", Eng. Struct., 140, 110-119. https://doi.org/10.1016/j.engstruct.2017.02.052
  8. Guo, X.Y. and Zhang, W. (2016), "Nonlinear vibrations of a reinforced composite plate with carbon nanotubes", Compos. Struct., 135, 96-108. DOI: https://doi.org/10.1016/j.compstruct.2015.08.063
  9. Hao, Y.X., Zhang, W. and Ji, X.L. (2010), "Nonlinear dynamic response of functionally graded rectangular plates under different internal resonances", Math. Probl. Eng., 2010, 738648-1-12.
  10. Jangam, S., Raja, S. and Maheswar Gowd, B.U. (2016), "Influence of multiwall carbon nanotube alignment on vibration damping of nanocomposites", J. Reinf. Plast. Compos., 35(8), 617-627. https://doi.org/10.1177/0731684415626285
  11. Kazanci, Z. (2009), "Nonlinear transient response of a laminated composite plate under time-dependent pulses", Int. Conf. Recent Adv. Sp. Technol., 4, 125-130.
  12. Kumar, P. and Srinivas, J. (2014), "Numerical evaluation of effective elastic properties of CNT-reinforced polymers for interphase effects", Comput. Mater. Sci., 88, 139-144. https://doi.org/10.1016/j.commatsci.2014.03.002
  13. Kumar, P. and Srinivas, J. (2017), "Vibration, buckling and bending behavior of functionally graded multi-walled carbon nanotube reinforced polymer composite plates using the layerwise formulation", Compos. Struct., 177, 158-170. https://doi.org/10.1016/j.compstruct.2017.06.055
  14. Kumar, D. and Srivastava, A. (2016), "Elastic properties of CNT - and graphene - reinforced nanocomposites using RVE", Steel Compos. Struct., Int. J., 21(5), 1085-1103. https://doi.org/10.12989/scs.2016.21.5.1085
  15. Lei, Z.X., Zhang, L.W. and Liew, K.M. (2015), "Elastodynamic analysis of carbon nanotube-reinforced functionally graded plates", Int. J. Mech. Sci., 99, 208-217. https://doi.org/10.1016/j.ijmecsci.2015.05.014
  16. Malekzadeh, P. and Monajjemzadeh, S.M. (2013), "Dynamic response of functionally graded plates in thermal environment under moving load", Compos. Part B: Eng., 45(1), 1521-1533. https://doi.org/10.1016/j.compositesb.2012.09.022
  17. Moradi-Dastjerdi, R. and Momeni-Khabisi, H. (2018), "Vibrational behavior of sandwich plates with functionally graded wavy carbon nanotube-reinforced face sheets resting on Pasternak elastic foundation", J. Vib. Control, 24(11), 2327-2343. https://doi.org/10.1177/1077546316686227
  18. Najafi, F., Shojaeefard, M.H. and Saeidi Googarchin, H. (2016), "Nonlinear low-velocity impact response of functionally graded plate with nonlinear three-parameter elastic foundation in thermal field", Compos. Part B: Eng., 107, 123-140. https://doi.org/10.1016/j.compositesb.2016.09.070
  19. Phung-Van, P., Nguyen, L.B., Tran, L.V., Dinh, T.D., Thai, C.H., Bordas, S.P.A., Abdel-Wahab, M. and Nguyen-Xuan, H. (2015), "An efficient computational approach for control of nonlinear transient responses of smart piezoelectric composite plates", Int. J. Non-Linear Mech., 76, 190-202. https://doi.org/10.1016/j.ijnonlinmec.2015.06.003
  20. Phung-Van, P., Ferreira, A.J.M., Nguyen-Xuan, H. and Abdel Wahab, M. (2017a), "An isogeometric approach for sizedependent geometrically nonlinear transient analysis of functionally graded nanoplates", Compos. Part B: Eng., 118, 125-134. https://doi.org/10.1016/j.compositesb.2017.03.012
  21. Phung-Van, P., Tran, L.V., Ferreira, A.J.M., Nguyen-Xuan, H. and Abdel-Wahab, M. (2017b), "Nonlinear transient isogeometric analysis of smart piezoelectric functionally graded material plates based on generalized shear deformation theory under thermo-electro-mechanical loads", Nonlinear Dyn., 87(2), 879-894. https://doi.org/10.1007/s11071-016-3085-6
  22. Rafiee, R. and Firouzbakht, V. (2014), "Multi-scale modeling of carbon nanotube reinforced polymers using irregular tessellation technique", Mech. Mater., 78, 74-84. https://doi.org/10.1016/j.mechmat.2014.07.021
  23. Seidel, G.D. and Lagoudas, D.C. (2006), "Micromechanical analysis of the effective elastic properties of carbon nanotube reinforced composites", Mech. Mater., 38(8-10), 884-907. https://doi.org/10.1016/j.mechmat.2005.06.029
  24. Sharma, A., Kumar, A., Susheel, C.K. and Kumar, R. (2016), "Smart damping of functionally graded nanotube reinforced composite rectangular plates", Compos. Struct., 155, 29-44. https://doi.org/10.1016/j.compstruct.2016.07.079
  25. Shokravi, M. (2017), "Buckling of sandwich plates with FG-CNT-reinforced layers resting on orthotropic elastic medium using Reddy plate theory", Steel Compos. Struct., Int. J., 23(6), 623-631.
  26. Song, M., Kitipornchai, S. and Yang, J. (2017), "Free and forced vibrations of functionally graded polymer composite plates reinforced with graphene nanoplatelets", Compos. Struct., 159, 579-588. https://doi.org/10.1016/j.compstruct.2016.09.070
  27. Swain, A., Roy, T. and Nanda, B.K. (2017), "Vibration damping characteristics of carbon nanotubes-based thin hybrid composite spherical shell structures", Mech. Adv. Mater. Struct., 24(2), 95-113. https://doi.org/10.1080/15376494.2015.1107669
  28. Tahouneh, V. (2017), "Using modified Halpin-Tsai approach for vibrational analysis of thick functionally graded multi-walled carbon nanotube plates", Steel Compos. Struct., Int. J., 23(6), 657-668.
  29. Udupa, G., Rao, S.S. and Gangadharan, K.V. (2012), "Future applications of carbon nanotube reinforced functionally graded composite materials", Proc. Int. Conf. Adv. Eng. Sci. Manage., 1, 399-404.
  30. Wang, C.Y. and Zhang, L.C. (2008), "A critical assessment of the elastic properties and effective wall thickness of single-walled carbon nanotubes", Nanotechnology, 19(7), 75705-1-5. https://doi.org/10.1088/0957-4484/19/7/075705
  31. Wang, Y.Y., Lam, K.Y. and Liu, G.R. (2001), "A strip element method for the transient analysis of symmetric laminated plates", Int. J. Solids Struct., 38(2), 241-259. https://doi.org/10.1016/S0020-7683(00)00035-4
  32. Wattanasakulpong, N. and Chaikittiratana, A. (2015), "Exact solutions for static and dynamic analyses of carbon nanotube-reinforced composite plates with Pasternak elastic foundation", Appl. Math. Model., 39(18), 5459-5472. https://doi.org/10.1016/j.apm.2014.12.058
  33. Yeh, M.-K., Tai, N.-H. and Liu, J.-H. (2006), "Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes", Carbon, 44(1), 1-9. https://doi.org/10.1016/j.carbon.2005.07.005
  34. Zhang, L.W., Xiao, L.N., Zou, G.L. and Liew, K.M. (2016), "Elastodynamic analysis of quadrilateral CNT-reinforced functionally graded composite plates using FSDT element-free method", Compos. Struct., 148, 144-154. https://doi.org/10.1016/j.compstruct.2016.04.006
  35. Zhang, L.., Lei, Z.X. and Liew, K.M. (2017), "Free vibration analysis of FG-CNT reinforced composite straight-sided quadrilateral plates resting on elastic foundations using the IMLS-Ritz method", J. Vib. Control, 23(6), 1026-1043. https://doi.org/10.1177/1077546315587804

피인용 문헌

  1. Free vibration analysis of angle-ply laminated composite and soft core sandwich plates vol.33, pp.5, 2019, https://doi.org/10.12989/scs.2019.33.5.663
  2. Combined effect of carbon nanotubes distribution and orientation on functionally graded nanocomposite beams using finite element analysis vol.8, pp.1, 2018, https://doi.org/10.1088/2053-1591/abc773