References
- Han, D. S., Jang, S. H., Lee, K. H., “Stiffness Evaluation of Elastomeric Bearings for Leg Mating Unit,” Journal of the Korea Academia-Industrial Cooperation Society, Vol. 18, No. 12, pp. 106-111, 2017. https://doi.org/10.5762/KAIS.2017.18.12.106
- Sin, B. S., Kim, S. U., Kim J. K., Lee, K. H., “Robust Design of an Automobile Ball Joint Considering the Worst-Case Analysis,” Journal of the Korean Society of Manufacturing, Vol. 16, No. 1, pp. 102-111, 2017.
- Nestor, V. Q., Javier, V. G., Salvador, P., "Surrogate Modeling-Based Optimization of SAGD Processes," Journal of Petroleum Science and Engineering, Vol. 35, Issues 12, pp. 83-89, 2002. https://doi.org/10.1016/S0920-4105(02)00167-5
- Song, B. C., Park, Y. C., Kang, S. W., Lee, K. H., “Structural Optimization of an Upper Control Arm, Considering the Strength,” J. of Automobile Engineering, Vol. 223, No. 6, pp. 727-735, 2009. https://doi.org/10.1243/09544070JAUTO1090
- Lee, K. H., “A Robust Structural Design Method Using the Kriging Model to Define the Probability of Design Success,” Journal of Mechanical Engineering Science, Series C, Vol. 224, No. 2, pp. 379-388, 2010. https://doi.org/10.1243/09544062JMES1736
- Park, Y. C., Baek, S. K., Seo, B. K., Kim, J. K., Lee, K. H., "Lightweight Design of an Outer Tie Rod for an Electrical Vehicle," Journal of Applied Mathematics, Vol. 2014, pp. 6, 2014.
- Byon, S. K., "Optimization of Boss Shape for Damage Reduction of the Press-fitted Shaft End," Journal of the Korean Society of Manufacturing, Vol. 14, No. 3, pp. 85-91, 2015 (http://doi.org/10.14775/ksmpe.2015.14.3.085).
- Bae, D. Y., Lee, S. J., Lee, J. Y., “Calculation of Load on Jacket Leg during Float-over Installation of Dual Topsides Using Single Vessel,” Journal of Ocean Engineering and Technology, Vol. 29, No. 2, pp. 135-142, 2015. https://doi.org/10.5574/KSOE.2015.29.2.135
- Seval, P., Fuad, O., “Compression of Hollow-Circular Fiber-Reinforced Rubber Bearings,” Structural Engineering and Mechanics, Vol. 38, No. 3, pp. 361-384, 2011. https://doi.org/10.12989/sem.2011.38.3.361