References
- H. Morkoc, S. Strite, G.B. Gao, M.E. Lin, B. Sverdlov and M. Burns, "Large-band-gap SiC, III-V nitride, and II-VI ZnSe-based semiconductor device technologies", J. Appl. Phys. 76 (1994) 1363.
- E.N. Mokhov, O.V. Avdeev, I.S. Barash, T.Yu. Chemekova, A.D. Roenkov, A.S. Segal, A.A. Wolfson, Y.N. Makarov, M.G. Ramm and H. Helava, "Ublimation growth of AlN bulk crystals on Ta crucibles", J. Cryst. Growth 281 (2005) 93.
- J.C. Rojo, L.J. Schowalter, K. Morgan, D.I. Florescu, F.H. Pollak, B. Raghothamacher and M. Dudley, "Single-crystal aluminum nitride substrate preparation from bulk crystals", Mater. Sci. Res. Soc. Symp. Proc 680E (2001) E2.1.1.
- A. Jacquot, B. Lenoir, A. Dauscher, P. Verardi, F. Craciun, M. Stolzer, M. Gartner and M. Dinescu, "Optical and thermal characterization of AlN thin films deposited by pulsed laser deposition", Appl. Surf. Sci. 186 (2002) 507.
- M. Pons, R. Boichot, N. Coudurier, A. Claudel, E. Blanquet, S. Lay, F. Mercier and D. Pique, "High temperature chemical vapor deposition of aluminum nitride, growth and evaluation", Surf. Coat. Tech. 230 (2013) 111.
- T. Nishida, T. Makimoto, H. Saito and T. Ban, "AlGaNbased ultraviolet light-emitting diodes grown on bulk AlN substrates", Appl. Phys. Lett. 84 (2004) 1002.
-
J.R. Grandusky, J.A. Smart, M.C. Mendrick, L.J. Schowalter, K.X. Chen and E.F. Schubert, "Pseudomorphic growth of thick n-type
$Al_xGa_{1-x}N$ layers on lowdefect- density bulk AlN substrates for UV LED applications", J. Cryst. Growth 311 (2009) 2864. - J.H. Edgar, L. Liu, B. Liu, D. Zhuang, J. Chaudhuri, M. Kuball and S. Rajasingam, "Bulk AlN crystal growth: self-seeding and seeding on 6H-SiC substrates", J. Cryst. Growth 246 (2002) 187.
- M.R. OLIVER, "Chemical-mechanical planarization of semiconductor materials", Springer Science & Business Media (2013).
- B. Stine, D. Ouma, R. Divecha, D.S. Boning, J. Chung, D. Hetherington, C.R. Harwood, O.S. Nakagawa and S.Y. Oh, "Rapid characterization and modeling of pattern dependent variation in chemical-mechanical polishing", IEEE T. Semiconduct. M. 11 (1998) 129.
- H. Aida, H. Takeda, K. Koyama, H. Katakura, K. Sunakawa and T. Doi, "Chemical mechanical polishing of gallium nitride with colloidal silica", J. Electrochem. Soc. 158 (2011) H206.
- H.J. Kim, Y.C. Lee and H.H. Jo, "Diamond mechanical polishing technology for LED", Trends Met. Mater. Eng. 25 (2012) 40.
- P.R. Tavernierz, T. Margalith, L.A. Coldren, S.P. Den-aars and D.R. Clarke, "Chemical mechanical polishing of gallium nitride", Electrochem. Solid. St. 5 (2002) G61.
-
K. Asghar, M. Qasim and D. Das, "Effect of polishing parameters on chemical mechanical planarization of Cplane (0001) gallium nitride surface using
$SiO_2$ and$Al_2O_3$ abrasives", ECS J. Solid State Sci. Technol. 3 (2014) 277. -
J. Wang, T. Wang, G. Pan and X. Lu, "Mechanism of GaN CMP based on
$H_2O_2$ slurry combined with UV light", ECS J. Solid State Sci. Technol. 4 (2015) 112. - H.S. Seong, "Chemical mechanical polishing process technology and equipment trends", The Magazine of the IEIE 40.
- S.M. Kang, "A study on the growth of AlN crystals", J. Cryst. Growth 23 (2013) 279.
- B.G. Koepke and R.D. Stokes, "A study of grinding damage in magnesium oxide single crystals", J. Mater. Sci. 5 (1970) 240.
- K.J. Kim, J.S. Jeong, H.J. Jang, H.M. Shin and H.D. Jeong, "Influence of the diamond abrasive size during mechanical polishing process on the surface morphology of gallium nitride substrate", J. Korean Soc. Precis. Eng. 25 (2008) 32.
- G. Chen, Z. Ni, L. Xu, Q. Li and Y. Zhao, "Performance of colloidal silica and ceria based slurries on CMP of Si-face 6H-SiC substrates", Appl. Surf. Sci. 359 (2015) 664.
- P.R. Dandu, V.K. Devarapalli and S.V. Babu, "Reverse selectivity - High silicon nitride and low silicon dioxide removal rates using ceria abrasive-based dispersions", J. Colloid. Interf. Sci. 347 (2010) 267.