참고문헌
- Lee, H. G., and Kim, H. K., 2018: Influence of drying methods on measurement of hydration degree of hydraulic inorganic materials: 1) Ordinary Portland cement-based paste and mortar, Journal of the Korean Institute of Resources Recycling, 27(1), pp.92-105. https://doi.org/10.7844/KIRR.2018.27.1.92
- Song, S., Sohn, D., Jennings, H. M., and Mason, T. O., 2000 : Hydration of alkali-activated ground granulated blast furnace slag. Journal of Materials Science, 35(1), pp.249-257. https://doi.org/10.1023/A:1004742027117
- Kim, D., Lai, H. T., Chilingar, G. V., and Yen, T. F. 2006 : Geopolymer formation and its unique properties. Environmental geology, 51(1), pp.103-111. https://doi.org/10.1007/s00254-006-0308-z
- Li, C., Sun, H., and Li, L., 2010 : A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements. Cement and Concrete Research, 40(9), pp.1341-1349. https://doi.org/10.1016/j.cemconres.2010.03.020
- Bullard, J. W., Jennings, H. M., Livingston, R. A., Nonat, A., Scherer, G. W., Schweitzer, J. S., and Thomas, J. J., 2011 : Mechanisms of cement hydration, Cement and Concrete Research, 41(12), pp.1208-1223. https://doi.org/10.1016/j.cemconres.2010.09.011
- Schwarz, N., and Neithalath, N., 2008 : Influence of a fine glass powder on cement hydration: Comparison to fly ash and modeling the degree of hydration. Cement and Concrete Research, 38(4), pp.429-436. https://doi.org/10.1016/j.cemconres.2007.12.001
- Lam, L., Wong, Y. L., and Poon, C. S., 2000 : Degree of hydration and gel/space ratio of high-volume fly ash/cement systems, Cement and Concrete Research, 30(5), pp.747-756. https://doi.org/10.1016/S0008-8846(00)00213-1
- Haha, M. B., Lothenbach, B., Le Saout, G. L., and Winnefeld, F., 2011 : Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag-Part I: Effect of MgO. Cement and Concrete Research, 41(9), pp.955-963. https://doi.org/10.1016/j.cemconres.2011.05.002
- Haha, M. B., Le Saout, G., Winnefeld, F., and Lothenbach, B., 2011 : Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags. Cement and Concrete Research, 41(3), pp.301-310. https://doi.org/10.1016/j.cemconres.2010.11.016
- North, M. R., and Swaddle, T. W., 2000 : Kinetics of silicate exchange in alkaline aluminosilicate solutions. Inorganic chemistry, 39(12), pp.2661-2665. https://doi.org/10.1021/ic0000707
- Bakharev, T., Sanjayan, J. G., and Cheng, Y. B., 1999 : Effect of elevated temperature curing on properties of alkali-activated slag concrete. Cement and concrete research, 29(10), pp.1619-1625. https://doi.org/10.1016/S0008-8846(99)00143-X
- Korpa, A., and Trettin, R., 2006 : The influence of different drying methods on cement paste microstructures as reflected by gas adsorption: comparison between freeze-drying (F-drying), D-drying, P-drying and oven-drying methods. Cement and Concrete Research, 36(4), pp.634-649. https://doi.org/10.1016/j.cemconres.2005.11.021
- Coussy, O., Dangla, P., Lassabatere, T., and Baroghel-Bouny, V., 2004 : The equivalent pore pressure and the swelling and shrinkage of cement-based materials. Materials and structures, 37(1), pp.15-20. https://doi.org/10.1007/BF02481623
- Bakharev, T., 2005 : Geopolymeric materials prepared using Class F fly ash and elevated temperature curing. Cement and concrete research, 35(6), pp.1224-1232. https://doi.org/10.1016/j.cemconres.2004.06.031
- Luke, K., and Glasser, F. P., 1987 : Selective dissolution of hydrated blast furnace slag cements. Cement and Concrete Research, 17(2), pp.273-282. https://doi.org/10.1016/0008-8846(87)90110-4
- Yang, K. H., Song, J. K., Ashour, A. F., and Lee, E. T., 2008 : Properties of cementless mortars activated by sodium silicate. Construction and Building Materials, 22(9), pp.1981-1989. https://doi.org/10.1016/j.conbuildmat.2007.07.003
- Yang, K. H., and Song, J. K., 2009 : Workability loss and compressive strength development of cementless mortars activated by combination of sodium silicate and sodium hydroxide. Journal of materials in Civil Engineering, 21(3), pp.119-127. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:3(119)
- Yang, K. H., Cho, A. R., Song, J. K., and Nam, S. H., 2012 : Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars. Construction and Building Materials, 29, pp.410-419. https://doi.org/10.1016/j.conbuildmat.2011.10.063
- Myers, R. J., Bernal, S. A., San Nicolas, R., and Provis, J. L., 2013 : Generalized structural description of calcium-sodium aluminosilicate hydrate gels: the cross-linked substituted tobermorite model. Langmuir, 29(17), pp.5294-5306. https://doi.org/10.1021/la4000473
- Halle, J. C., and Stern, K. H., 1980 : Vaporization and decomposition of sodium sulfate. Thermodynamics and kinetics. The Journal of Physical Chemistry, 84(13), pp.1699-1704. https://doi.org/10.1021/j100450a007
- Lothenbach, B., Winnefeld, F., Alder, C., Wieland, E., and Lunk, P., 2007 : Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes. Cement and Concrete Research, 37(4), pp.483-491. https://doi.org/10.1016/j.cemconres.2006.11.016
-
Guerrieri, M., and Sanjayan, J., 2011 : Investigation of the cause of disintegration of alkali-activated slag at temperature exposure of
$50^{\circ}C$ . Journal of Materials in Civil Engineering, 23(12), pp.1589-1595. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000313 - Garbev, K., Bornefeld, M., Beuchle, G., and Stemmermann, P., 2008 : Cell Dimensions and Composition of Nanocrystalline Calcium Silicate Hydrate Solid Solutions. Part 2: X-Ray and Thermogravimetry Study. Journal of the American Ceramic Society, 91(9), pp.3015-3023. https://doi.org/10.1111/j.1551-2916.2008.02601.x
- Yu, P., and Kirkpatrick, R. J., 1999 : Thermal dehydration of tobermorite and jennite. Concrete Science and Engineering, 1, pp.185-191.
- Collins, F., and Sanjayan, J. G., 2000 : Effect of pore size distribution on drying shrinking of alkali-activated slag concrete. Cement and Concrete Research, 30(9), pp.1401-1406. https://doi.org/10.1016/S0008-8846(00)00327-6
- Jensen, O. M., and Hansen, P. F., 2001 : Water-entrained cement-based materials: I. Principles and theoretical background. Cement and concrete research, 31(4), pp.647-654. https://doi.org/10.1016/S0008-8846(01)00463-X
- Escalante-Garcia, J. I., Fuentes, A. F., Gorokhovsky, A., Fraire-Luna, P. E., and Mendoza-Suarez, G., 2003 : Hydration products and reactivity of blast?furnace slag activated by various alkalis. Journal of the American Ceramic Society, 86(12), pp.2148-2153. https://doi.org/10.1111/j.1151-2916.2003.tb03623.x
- Gao, X., Yu, Q. L., and Brouwers, H. J. H., 2015 : Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag-fly ash blends. Construction and Building Materials, 80, pp.105-115. https://doi.org/10.1016/j.conbuildmat.2015.01.065
피인용 문헌
- 알칼리 활성 슬래그의 수화에 대한 개선된 화학양론적 모델 vol.9, pp.1, 2021, https://doi.org/10.14190/jrcr.2021.9.1.1