References
- Ji H.R. and Hong H., "Automatic detection of internal and surface cracks of metal products using two and three-dimensional crack enhancement filtering methods in industrial CT volume data", J. of KISE, 41(1), pp. 67-79, (2014).
- Bi B., Zeng L., Jiang H., "A novel method for 3D crack edge extraction in CT volume data", X-ray Science and Technology, 19, pp.429-442, (2011).
- Ehrig K., Goebbles J., Meinel D., Paetsch O., Prohaska S., Zobel V., "Comparison of crack detection methods for analyzing damage processes in concrete with computed tomography," International Symposium on Digital Industrial Radiology and Computed Tomography, pp.1-8, (2011).
- Feldkamp L., Davis L., Kress J., "Practical cone-beam algorithm," J. Opt. Soc. Am., 1(6), pp. 612-619, (1984). https://doi.org/10.1364/JOSAA.1.000612
- Kak A. C. and Slaney M., Principles of Computerized Tomographic Imaging, IEEE Press, (1999).
- Song D.G., Jeong C.W., Jun K.S., "The study on the implementation of the X-ray CT system using the conebeam for the 3D dynamic image acquisition", J. of Advanced Information Technology and Convergence, 9(2), pp. 57-64, (2011).
- Yoon H. and Yun S., "Development of Graphical Solution for Computer-Assisted Fault Diagnosis: Preliminary Study", J of Korean Society for Nondestructive Testing, 29(1), pp. 36-42, (2009).
- Kim Y.H. and Nam J.H., "Estimation of the noise variance in image and noise reduction", J. of the Korean Statistical Society, pp. 905-914, (2011).
- Choi H.H., Introduction of 3D Game Programming using the DIRECTX 9, PART II - Chapter 2, Jeongbo Publishing, (2004).
- Yoo S.K. and Kim N.H., "Three dimensional reconstruction and display of CT images via linear octree", J. of the Institute of Electronics and Information Engineers, 26(6), pp. 876-885, (1989).
- William E.L. and Harvey E.C., "Marching cube: a high resolution 3D surface construction algorithm", Computer Graphics, 21(4), (1987).
- Kang D.S. and Shin B.S., "Real-time volume rendering using point-primitive", J. of Korea Multimedia Society, 14, pp. 1229-1237, (2011). https://doi.org/10.9717/kmms.2011.14.10.1229
- Eberly D., "Triangulation by ear clipping", Geometric Tools, LLC, (1998).
- Woo S.B., A Retrieval Method for 3D CAD Data Using Sectional Image, M.D. Thesis, Hanyang University Graduate School, (2004).
- Yoon D.M. and Han J.H., "Connected component labeling-based geometric features and a classification algorithm for surface defect inspection", J. of KISE, 21(5), pp. 739-749, (1994).