3D 스캐너를 이용한 커브드 모니터의 스프링백 분석 연구

A study on the springback analysis of a curve monitor using a 3D scanner

  • 윤형우 (공주대학교 금형공학과) ;
  • 이춘규 (공주대학교 금형공학과)
  • Yoon, Hyoung-Woo (Department of Mold & Die Engineering, Gongju National University) ;
  • Lee, Chun-Kyu (Department of Mold & Die Engineering, Gongju National University)
  • 투고 : 2018.09.19
  • 심사 : 2018.12.01
  • 발행 : 2018.12.01

초록

Flexible display tends to grow every year, It tends to be larger, slimmer, and higher in image quality. Therefore, accuracy is required in the manufacturing process of each part. In the curved monitor, the bottom chassis has a structure to which other parts can be attached. The accuracy of the curvature which the bottom chassis of the curve monitor monitors has is important. If the curvature error is large, serious defects such as cracks, warpage, twisting and the like occur. Curvature was analyzed using 3D scanner. In the Forming process and Restriking process steps, spring go occurred, and spring back occurred in the Notching process and Bending process steps. Even in the same process, it was confirmed that the curvature value varied depending on the formed shape.

키워드

참고문헌

  1. Innopolis Foundation, Market Trends Report, Flexible display market, 2018.
  2. J.S Park, H.J. Choi, S.H. Kim , "Improvement in Prediction Accuracy of Spring for Stamping CAE consider Tool Deformation", Trans. Mater. Process, Vol.23, No.6, pp. 380-385, 2014. https://doi.org/10.5228/KSTP.2014.23.6.380
  3. D. Y. Yang, S. W. Lee, J. W. Yoon, D. J. Yoo, "Springback Analyses in Sheet Metal Stamping Processes and Industrial Applications", Korean Society for Plastic Engineering, pp. 1-8, 1998.
  4. J. S. Park, H. J. Choi, S. H. Kim, "Improvement in Prediction Accuracy of Spring back for Stamping CAE considering Tool Deformation", Korean Society for Plastic Engineering, pp. 308-385, 2014.
  5. H. T. Kim, J. G. Eom, I. S. Choi, M. C. Lee, M. S. Joun, "Consideration on Effects of Mesh Systems on True Stress-Strain Acquisition Method over a Large Range of Strains by Tensile Test and Finite Element Method", The Korean Society of Mechanical Engineers, pp. 2807-2812, 2007.
  6. K. M. Lee, H. Y. Song, K. H. Lee, H. S. Hwang, "Influence of the angles and number of scans on the accuracy of 3D laser scanning", The Korean Journal of Orthodontics 41(2), pp. 76-86, 2011. https://doi.org/10.4041/kjod.2011.41.2.76