Advances in Computational Design

  • 제3권1호
  • /
  • Pages.87-112
  • /
  • 2018
  • /
  • 2383-8477(pISSN)
  • /
  • 2466-0523(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Development of engineering software to predict the structural behavior of arch dams

  • Altunisik, Ahmet Can (Karadeniz Technical University, Department of Civil Engineering) ;
  • Kalkan, Ebru (Karadeniz Technical University, Department of Civil Engineering) ;
  • Basaga, Hasan Basri (Karadeniz Technical University, Department of Civil Engineering)
  • 투고 : 2017.10.24
  • 심사 : 2018.01.19
  • 발행 : 2018.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, it is aimed to present engineering software to estimate the structural response of concrete arch dam. Type-1 concrete arch dam constructed in the laboratory is selected as a reference model. Finite element analyses and experimental measurements are conducted to show the accuracy of initial model. Dynamic analyses are carried out by spectrum analysis under empty reservoir case considering soil-structure interaction and fixed foundation condition. The displacements, principal stresses and strains are presented as an analysis results at all nodal points on downstream and upstream faces of dam body. It is seen from the analyses that there is not any specific ratio between prototype and scaled models for each nodal point with different scale values. So, dynamic analyses results cannot be generalized with a single formula. To eliminate this complexity, the regression analysis, which is a statistical method to obtain the real model results according to the prototype model by using fitting curves, is used. The regression analysis results are validated by numerical solutions using ANSYS software and the error percentages are examined. It is seen that 10% error rates are not exceeded.

키워드

참고문헌

  1. Arch dams (1968), "A review of British Research and Development", Proceedings of the Symposium held at the Institution of Civil Engineers, London, England, March.
  2. Atmaca, H. (2016), "System development for full scale modeling and analysis of building inventory", Msc Dissertation, Yildiz Technical University, Istanbul, Turkey.
  3. Basaga, H.B. (2009), "An approach for reliability analysis of structures: improved response surface method", Ph.D Dissertation, Karadeniz Technical University, Trabzon, Turkey.
  4. Bayraktar, A., Turker, T. and Altunisik, A.C. (2014), "Experimental frequencies and damping ratios for historical masonry arch bridges", Constr. Build. Mater., 75, 234-241.
  5. Besiktas, M. (2010), "Determination of flow duration curves by regression analysis in the eastern black sea and current estimation", Msc Dissertation, Istanbul Technical University, Istanbul, Turkey.
  6. Chan, Y.K., Lu, Y.K. and Albermani, F.G. (2010), "Performance-based structural fire design of steel frames using conventional computer software", Steel Compos. Struct., 10(3), 207-222. https://doi.org/10.12989/scs.2010.10.3.207
  7. Cheng, J. (2012), "Development of computational software for flutter reliability analysis of long span bridges", Wind Struct., 15(3), 209-221. https://doi.org/10.12989/was.2012.15.3.209
  8. Gu, Q. and Ozcelik, O. (2011), "Integrating opensees with other software-with application to coupling problems in civil engineering", Struct. Eng. Mech., 40, 85-103. https://doi.org/10.12989/sem.2011.40.1.085
  9. Kartal, M.E., Bayraktar, A., Cavuslu, M., Karabulut, M. and Basaga HB (2015), "Investigation of RCC Dams Considering Viscous Boundary Conditions", 2. International Sustainable Buildings Symposium, Ankara, Turkey.
  10. Mittrup, I. and Hartmann, D. (2005), "Structural monitoring of dams using software agents", Computing in Civil Engineering, ASCE, 1-7.
  11. Nasserzarea, J., Leib, Y. and Eskandari-Shiria, S. (2000), "Computation of natural frequencies and mode shapes of arch dams as an inverse problem", Adv. Eng. Softw., 31, 827-836. https://doi.org/10.1016/S0965-9978(00)00045-4
  12. Ohmachi, T. and Jalali A (1999), "Fundamental study on near-field effects on earthquake response of arch dams", Earthq. Eng. Eng. Seismology, 1(1), 1-11.
  13. Oliveira, S. and Faria, R. (2006), "Numerical simulation of collapse scenarios in reduced scale tests of arch dams", Eng. Struct., 28, 1430-1439. https://doi.org/10.1016/j.engstruct.2006.01.012
  14. Ozdemir, Y. (2004), "Information Transfer via regression among periodic-stochastic hydrologic processes", Ph.D Dissertation, Dokuz Eylul University, Izmir, Turkey
  15. Peng, J. and Law, K.H. (2002), "A prototype software framework for internet-enabled collaborative development of a structural analysis program", Eng. Comput., 18, 38-49. https://doi.org/10.1007/s003660200003
  16. Qiujing, Z., Guoxin, Z., Haifeng, L., Yi, L. and Bo, Y. (2012), "Study on regression analysis and simulation feedback-prediction methods of super high arch dam during construction and first impounding process", Earth Space- ASCE, 1024-1033.
  17. Sahin, A. (2009), "Digital signal processing, dynamic characteristic identification and finite element model updating software for experimental and operational modal testing of structures: SignalCAD-ModalCAD-FemUP", Ph.D Dissertation, Karadeniz Technical University, Trabzon, Turkey.
  18. Sahin, A. and Bayraktar, A. (2010a), "SignalCAD-A digital signal processing software for forced and ambient vibration testing of engineering structures", J. Test. Eval., 38(1), 95-110.
  19. Sahin, A. and Bayraktar, A. (2010b), "ModalCAD-interactive dynamic characteristic identification software for experimental and operational modal analysis of engineering structures", J. Test. Eval., 38(6), 738-758.
  20. Serhatoglu, C. (2015), "Numerical and empirical investigation of dynamic performance of historical masonry minarets in Bursa", Msc Dissertation, Uludag University, Bursa, Turkey.
  21. Sevim, B. (2010), "Determination of dynamic behavior of arch dams using finite element and experimental modal analysis methods", Ph.D Dissertation, Karadeniz Technical University, Trabzon, Turkey.
  22. Sevim, B., Altunisik, A.C., Bayraktar, A., Akkose, M. and Calayir, Y. (2011), "Water length and height effects on the earthquake behavior of arch dam-reservoir-foundation systems", KSCE J. Civil Eng., 15, 295-303. https://doi.org/10.1007/s12205-011-0815-7
  23. Sevim, B., Altunisik, A.C. and Bayraktar, A. (2012), "Experimental evaluation of crack effects on the dynamic characteristics of a prototype arch dam using ambient vibration tests", Comput. Concrete, 10(3), 277-294. https://doi.org/10.12989/cac.2012.10.3.277
  24. Sevim, B., Altunisik, A.C. and Bayraktar, A. (2014), "Construction stages analyses using time dependent material properties of concrete arch dams", Comput. Concrete, 14(5), 599-612. https://doi.org/10.12989/cac.2014.14.5.599
  25. Sumerkan, S. (2014), "Natural frequency formula for post tensioned balanced cantilever bridges", Msc Dissertation, Karadeniz Technical University, Trabzon, Turkey.
  26. Wang, H. and Li, D. (2007), "Experimental study of dynamic damage of an arch dam", Earthq. Eng. Struct. D., 36, 347-366. https://doi.org/10.1002/eqe.637
  27. Xiang, J., Jiang, Z., Wang, Y. and Chen, X. (2011), "Study on damage detection software of beam-like structures", Struct. Eng. Mech., 39(1), 77-91. https://doi.org/10.12989/sem.2011.39.1.077
  28. Yilmaz, O. and Sahin, A. (2013), "Educational software development for design of steel structures lesson", Sigma J. Eng. Natural Sci., 31(4), 571-581.

Cited by

  1. Prediction of UCS and STS of Kaolin clay stabilized with supplementary cementitious material using ANN and MLR vol.5, pp.2, 2018, https://doi.org/10.12989/acd.2020.5.2.195