Acknowledgement
Grant : AM-based eco-friendly automotive parts R&BD
Supported by : Ulsan Metropolitan City, Ministry of Trade, Industry and Energy (MOTIE)
References
- Bandodkar, A. J., Jeerapan, I., and Wang, J., "Wearable Chemical Sensors: Present Challenges and Future Prospects," ACS Sensors, Vol. 1, No. 5, pp. 464-482, 2016. https://doi.org/10.1021/acssensors.6b00250
- Chu, W.-S., Kim, M.-S., Jang, K.-H., Song, J.-H., Rodrigue, H., et al., "From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) Via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 3, No. 2, pp. 209-222, 2016. https://doi.org/10.1007/s40684-016-0028-0
- Kang, H. S., Lee, J. Y., Choi, S., Kim, H., Park, J. H., et al., "Smart Manufacturing: Past Research, Present Findings, and Future Directions," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 3, No. 1, pp. 111-128, 2016. https://doi.org/10.1007/s40684-016-0015-5
- Teng, X.-F., Zhang, Y.-T., Poon, C. C., and Bonato, P., "Wearable Medical Systems for P-Health," IEEE Reviews in Biomedical Engineering, Vol. 1, pp. 62-74, 2008. https://doi.org/10.1109/RBME.2008.2008248
- Parrilla, M., Canovas, R., Jeerapan, I., Andrade, F. J., and Wang, J., "A Textile Based Stretchable Multi-Ion Potentiometric Sensor," Advanced Healthcare Materials, Vol. 5, No. 9, pp. 996-1001, 2016. https://doi.org/10.1002/adhm.201600092
- Diercks, D. B., Shumaik, G. M., Harrigan, R. A., Brady, W. J., and Chan, T. C., "Electrocardiographic Manifestations: Electrolyte Abnormalities," The Journal of Emergency Medicine, Vol. 27, No. 2, pp. 153-160, 2004. https://doi.org/10.1016/j.jemermed.2004.04.006
- Hamouti, N., Del Coso, J., Ortega, J. F., and Mora-Rodriguez, R., "Sweat Sodium Concentration during Exercise in the Heat in Aerobically Trained and Untrained Humans," European Journal of Applied Physiology, Vol. 111, No. 11, pp. 2873-2881, 2011. https://doi.org/10.1007/s00421-011-1911-6
- Lara, B., Gallo-Salazar, C., Puente, C., Areces, F., Salinero, J. J., et al., "Interindividual Variability in Sweat Electrolyte Concentration in Marathoners," Journal of the International Society of Sports Nutrition, Vol. 13, Paper No. 31, 2016.
- Hew-Butler, T., Noakes, T. D., Soldin, S. J., and Verbalis, J. G., "Acute Changes in arginine Vasopressin, Sweat, Urine and Serum Sodium Concentrations in Exercising Humans: Does a Coordinated Homeostatic Relationship Exist?" British Journal of Sports Medicine, Vol. 44, No. 10, pp. 710-715, 2010. https://doi.org/10.1136/bjsm.2008.051771
- Baker, L. B., Ungaro, C. T., Barnes, K. A., Nuccio, R. P., Reimel, A. J., et al., "Validity and Reliability of a Field Technique for Sweat Na+ and K+ Analysis during Exercise in a Hot-Humid Environment," Physiological Reports, Vol. 2, No. 5, Paper No. e12007, 2014.
- Herrmann, C., Schmidt, C., Kurle, D., Blume, S., and Thiede, S., "Sustainability in Manufacturing and Factories of the Future," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 4, pp. 283-292, 2014. https://doi.org/10.1007/s40684-014-0034-z
- Ahn, S.-H., "An Evaluation of Green Manufacturing Technologies Based on Research Databases," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 1, pp. 5-9, 2014. https://doi.org/10.1007/s40684-014-0001-8
- Gandhiraman, R. P., Jayan, V., Han, J.-W., Chen, B., Koehne, J. E., et al., "Plasma Jet Printing of Electronic Materials on Flexible and Nonconformal Objects," ACS Applied Materials & Interfaces, Vol. 6, No. 23, pp. 20860-20867, 2014. https://doi.org/10.1021/am505325y
- Moon, S. K., Tan, Y. E., Hwang, J., and Yoon, Y.-J., "Application of 3D Printing Technology for Designing Light-Weight Unmanned Aerial Vehicle Wing Structures," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 3, pp. 223-228, 2014. https://doi.org/10.1007/s40684-014-0028-x
- Kim, J.-H., Shim, B. S., Kim, H. S., Lee, Y.-J., Min, S.-K., et al., "Review of Nanocellulose for Sustainable Future Materials," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 2, No. 2, pp. 197-213, 2015. https://doi.org/10.1007/s40684-015-0024-9
- Chu, W.-S., Kim, C.-S., Lee, H.-T., Choi, J.-O., Park, J.-I., et al., "Hybrid Manufacturing in Micro/Nano Scale: A Review," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 1, pp. 75-92, 2014. https://doi.org/10.1007/s40684-014-0012-5
- Matzeu, G., Florea, L., and Diamond, D., "Advances in Wearable Chemical Sensor Design for Monitoring Biological Fluids," Sensors and Actuators B: Chemical, Vol. 211, pp. 403-418, 2015. https://doi.org/10.1016/j.snb.2015.01.077
- Morris, D., Coyle, S., Wu, Y., Lau, K. T., Wallace, G., et al., "Bio-Sensing Textile Based Patch with Integrated Optical Detection System for Sweat Monitoring," Sensors and Actuators B: Chemical, Vol. 139, No. 1, pp. 231-236, 2009. https://doi.org/10.1016/j.snb.2009.02.032
- Schazmann, B., Morris, D., Slater, C., Beirne, S., Fay, C., et al., "A Wearable Electrochemical Sensor for the Real-Time Measurement of Sweat Sodium Concentration," Analytical Methods, Vol. 2, No. 4, pp. 342-348, 2010. https://doi.org/10.1039/b9ay00184k
- Bandodkar, A. J., Molinnus, D., Mirza, O., Guinovart, T., Windmiller, J. R., et al., "Epidermal Tattoo Potentiometric Sodium Sensors with Wireless Signal Transduction for Continuous Non-Invasive Sweat Monitoring," Biosensors and Bioelectronics, Vol. 54, pp. 603-609, 2014. https://doi.org/10.1016/j.bios.2013.11.039
- Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., et al., "Fully Integrated Wearable Sensor Arrays for Multiplexed in Situ Perspiration Analysis," Nature, Vol. 529, No. 7587, pp. 509-514, 2016. https://doi.org/10.1038/nature16521
- Matzeu, G., O'Quigley, C., McNamara, E., Zuliani, C., Fay, C., Glennon, T., et al., "An Integrated Sensing and Wireless Communications Platform for Sensing Sodium in Sweat," Analytical Methods, Vol. 8, No. 1, pp. 64-71, 2016. https://doi.org/10.1039/C5AY02254A
- Bandodkar, A. J., Hung, V. W. S., Jia, W., Valdes-RamIrez, G., Windmiller, J. R., et al., "Tattoo-Based Potentiometric Ion-Selective Sensors for Epidermal pH Monitoring," Analyst, Vol. 138, No. 1, pp. 123-128, 2013. https://doi.org/10.1039/C2AN36422K
- Jia, W., Bandodkar, A. J., Valdes-Ramirez, G., Windmiller, J. R., Yang, Z., et al., "Electrochemical Tattoo Biosensors for Real-Time Noninvasive Lactate Monitoring in Human Perspiration," Analytical Chemistry, Vol. 85, No. 14, pp. 6553-6560, 2013. https://doi.org/10.1021/ac401573r
- Kim, J., De Araujo, W. R., Samek, I. A., Bandodkar, A. J., Jia, W., et al., "Wearable Temporary Tattoo Sensor for Real-Time Trace Metal Monitoring in Human Sweat," Electrochemistry Communications, Vol. 51, pp. 41-45, 2015. https://doi.org/10.1016/j.elecom.2014.11.024
- Rose, D. P., Ratterman, M. E., Griffin, D. K., Hou, L., Kelley- Loughnane, N., et al., "Adhesive RFID Sensor Patch for Monitoring of Sweat Electrolytes," IEEE Transactions on Biomedical Engineering, Vol. 62, No. 6, pp. 1457-1465, 2015. https://doi.org/10.1109/TBME.2014.2369991
- Cazale, A., Sant, W., Ginot, F., Launay, J.-C., Savourey, G., et al., "Physiological Stress Monitoring Using Sodium Ion Potentiometric Microsensors for Sweat Analysis," Sensors and Actuators B: Chemical, Vol. 225, pp. 1-9, 2016. https://doi.org/10.1016/j.snb.2015.10.114
- Parrilla, M., Ferré, J., Guinovart, T., and Andrade, F. J., "Wearable Potentiometric Sensors Based on Commercial Carbon Fibres for Monitoring Sodium In Sweat," Electroanalysis, Vol. 28, No. 6, pp. 1267-1275, 2016. https://doi.org/10.1002/elan.201600070
- Caldara, M., Colleoni, C., Guido, E., Re, V., and Rosace, G., "Optical Monitoring of Sweat pH by a Textile Fabric Wearable Sensor Based on Covalently Bonded Litmus-3-Glycidoxypropyltrimethoxysilane Coating," Sensors and Actuators B: Chemical, Vol. 222, pp. 213-220, 2016. https://doi.org/10.1016/j.snb.2015.08.073
- Al-Omari, M., Liu, G., Mueller, A., Mock, A., Ghosh, R. N., et al., "A Portable Optical Human Sweat Sensor," Journal of Applied Physics, Vol. 116, No. 18, Paper No. 183102, 2014.
- Lisak, G., Arnebrant, T., Ruzgas, T., and Bobacka, J., "Textile-Based Sampling for Potentiometric Determination of Ions," Analytica Chimica Acta, Vol. 877, pp. 71-79, 2015. https://doi.org/10.1016/j.aca.2015.03.045
- Khodagholy, D., Curto, V. F., Fraser, K. J., Gurfinkel, M., Byrne, R., et al., "Organic Electrochemical Transistor Incorporating an Ionogel as a solid State Electrolyte for Lactate Sensing," Journal of Materials Chemistry, Vol. 22, No. 10, pp. 4440-4443, 2012. https://doi.org/10.1039/c2jm15716k
- Selvam, A. P., Muthukumar, S., Kamakoti, V., and Prasad, S., "A Wearable Biochemical Sensor for Monitoring Alcohol Consumption Lifestyle through Ethyl Glucuronide (EtG) Detection in Human Sweat," Scientific Reports, Vol. 6, Paper No. 23111, 2016.
- Lee, H., Choi, T. K., Lee, Y. B., Cho, H. R., Ghaffari, R., et al., "A Graphene-Based Electrochemical Device with Thermoresponsive Microneedles for Diabetes Monitoring and Therapy," Nature Nanotechnology, Vol. 11, pp. 566-572, 2016. https://doi.org/10.1038/nnano.2016.38
- Liu, G., Ho, C., Slappey, N., Zhou, Z., Snelgrove, S., et al., "A Wearable Conductivity Sensor for Wireless Real-Time Sweat Monitoring," Sensors and Actuators B: Chemical, Vol. 227, pp. 35-42, 2016. https://doi.org/10.1016/j.snb.2015.12.034
- Bhandari, B., Lee, G.-Y., and Ahn, S.-H., "A Review on IPMC Material as Actuators and Sensors: Fabrications, Characteristics and Applications," Int. J. Precis. Eng. Manuf., Vol. 13, No. 1, pp. 141-163, 2012. https://doi.org/10.1007/s12541-012-0020-8
- Rodrigue, H., Wang, W., Bhandari, B., Han, M.-W., and Ahn, S.-H., "Cross-Shaped Twisting Structure Using SMA-Based Smart Soft Composite," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 2, pp. 153-156, 2014. https://doi.org/10.1007/s40684-014-0020-5
-
Kim, J., McBride, S., Tellis, B., Alvarez-Urena, P., Song, Y.-H., et al., "Rapid-Prototyped PLGA/
${\beta}$ -TCP/Hydroxyapatite Nanocomposite Scaffolds in A Rabbit Femoral Defect Model," Biofabrication, Vol. 4, No. 2, Paper No. 025003, 2012. - Fried, J. R., "Polymer Science and Technology," Prentice Hall Professional Technical Reference, 2nd Ed., 2003.
- Kim, J. Y. and Cho, D.-W., "Blended PCL/PLGA Scaffold Fabrication Using Multi-Head Deposition System," Microelectronic Engineering, Vol. 86, No. 4, pp. 1447-1450, 2009. https://doi.org/10.1016/j.mee.2008.11.026
- Yen, H.-J., Tseng, C.-S., Hsu, S.-h., and Tsai, C.-L., "Evaluation of Chondrocyte Growth in the Highly Porous Scaffolds Made by Fused Deposition Manufacturing (FDM) Filled with Type Ii Collagen," Biomedical Microdevices, Vol. 11, No. 3, pp. 615-624, 2009. https://doi.org/10.1007/s10544-008-9271-7
- Korpela, J., Kokkari, A., Korhonen, H., Malin, M., Narhi, T., et al., "Biodegradable and Bioactive Porous Scaffold Structures Prepared Using Fused Deposition Modeling," Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 101, No. 4, pp. 610-619, 2013.
- Teo, E. Y., Ong, S.-Y., Chong, M. S. K., Zhang, Z., Lu, J., et al., "Polycaprolactone-Based Fused Deposition Modeled Mesh for Delivery of Antibacterial Agents to Infected Wounds," Biomaterials, Vol. 32, No. 1, pp. 279-287, 2011. https://doi.org/10.1016/j.biomaterials.2010.08.089
- Shim, J.-H., Moon, T.-S., Yun, M.-J., Jeon, Y.-C., Jeong, C.-M., et al., "Stimulation of Healing within a Rabbit Calvarial Defect by a PCL/PLGA Scaffold Blended with TCP Using Solid Freeform Fabrication Technology," Journal of Materials Science: Materials in Medicine, Vol. 23, No. 12, pp. 2993-3002, 2012. https://doi.org/10.1007/s10856-012-4761-9
- Bourell, D., Stucker, B., Espalin, D., Arcaute, K., Rodriguez, D., et al., "Fused Deposition Modeling of Patient-Specific Polymethylmethacrylate Implants," Rapid Prototyping Journal, Vol. 16, No. 3, pp. 164-173, 2010. https://doi.org/10.1108/13552541011034825
- Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., et al., "Scaffold Development Using Selective Laser Sintering of Polyetheretherketone-Hydroxyapatite Biocomposite Blends," Biomaterials, Vol. 24, No. 18, pp. 3115-3123, 2003. https://doi.org/10.1016/S0142-9612(03)00131-5
- Wu, W. Z., Geng, P., Zhao, J., Zhang, Y., Rosen, D., et al., "Manufacture and Thermal Deformation Analysis of Semicrystalline Polymer Polyether Ether Ketone by 3D Printing," Materials Research Innovations, Vol. 18, No. 5, pp. S5-12-S15-16, 2014. https://doi.org/10.1179/1432891714Z.000000000920
- Vaezi, M. and Yang, S., "A Novel Bioactive PEEK/HA Composite with Controlled 3D Interconnected Ha Network," International Journal of Bioprinting, Vol. 1, No. 1, pp. 66-76, 2015.
- Mutlu, R., Alici, G., In Het Panhuis, M., and Spinks, G., "Effect of Flexure Hinge Type on a 3D Printed Fully Compliant Prosthetic Finger," Proc. of IEEE International Conference on Advanced Intelligent Mechatronics (AIM), pp. 790-795, 2015.
- Carneiro, O. S., Silva, A. F., and Gomes, R., "Fused Deposition Modeling with Polypropylene," Materials & Design, Vol. 83, pp. 768-776, 2015. https://doi.org/10.1016/j.matdes.2015.06.053
- Bakarich, S. E., Beirne, S., Wallace, G. G., and Spinks, G. M., "Extrusion Printing of Ionic-Covalent Entanglement Hydrogels with High Toughness," Journal of Materials Chemistry B, Vol. 1, No. 38, pp. 4939-4946, 2013. https://doi.org/10.1039/c3tb21159b
- Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., et al., "Three-Dimensional Printing of Complex Biological Structures by Freeform Reversible Embedding of Suspended Hydrogels," Science Advances, Vol. 1, No. 9, Paper No. e1500758, 2015.
- Muller, M., Becher, J., Schnabelrauch, M., and Zenobi-Wong, M., "Nanostructured Pluronic Hydrogels as Bioinks for 3D Bioprinting," Biofabrication, Vol. 7, No. 3, Paper No. 035006, 2015.
- Landers, R. and Mülhaupt, R., "Desktop Manufacturing of Complex Objects, Prototypes and Biomedical Scaffolds by Means of Computer-Assisted Design Combined with Computer-Guided 3D Plotting of Polymers and Reactive Oligomers," Macromolecular Materials and Engineering, Vol. 282, No. 1, pp. 17-21, 2000. https://doi.org/10.1002/1439-2054(20001001)282:1<17::AID-MAME17>3.0.CO;2-8
- Haberstroh, K., Ritter, K., Kuschnierz, J., Bormann, K. H., Kaps, C., et al., "Bone Repair by Cell-Seeded 3D-Bioplotted Composite Scaffolds Made of Collagen Treated Tricalciumphosphate or Tricalciumphosphate-Chitosan-Collagen Hydrogel or PLGA in Ovine Critical-Sized Calvarial Defects," Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 93, No. 2, pp. 520-530, 2010.
- Lim, T. C., Chian, K. S., and Leong, K. F., "Cryogenic Prototyping of Chitosan Scaffolds with Controlled Micro and Macro Architecture and their Effect on in Vivo Neo-Vascularization and Cellular Infiltration," Journal of Biomedical Materials Research Part A, Vol. 94, No. 4, pp. 1303-1311, 2010.
- Lee, H., Kim, Y., Kim, S., and Kim, G., "Mineralized Biomimetic Collagen/Alginate/Silica Composite Scaffolds Fabricated by a Low-Temperature Bio-Plotting Process for Hard Tissue Regeneration: Fabrication, Characterisation and in Vitro Cellular Activities," Journal of Materials Chemistry B, Vol. 2, No. 35, pp. 5785-5798, 2014.
- Bakarich, S. E., Gorkin, R., and Spinks, G. M., "4D Printing with Mechanically Robust, Thermally Actuating Hydrogels," Macromolecular Rapid Communications, Vol. 36, No. 12, pp. 1211-1217, 2015. https://doi.org/10.1002/marc.201500079
- Chien, K. B., Makridakis, E., and Shah, R. N., "Three-Dimensional Printing of Soy Protein Scaffolds for Tissue Regeneration," Tissue Engineering Part C: Methods, Vol. 19, No. 6, pp. 417-426, 2012.
- Maher, P. S., Keatch, R. P., Donnelly, K., and Paxton, J. Z., "Formed 3D Bio-Scaffolds Via Rapid Prototyping Technology," Proc. of 4th European Conference of the International Federation for Medical and Biological Engineering, Vol. 22, pp. 2200-2204, 2009.
- Kang, S.-W., Bae, J.-H., Park, S.-A., Kim, W.-D., Park, M.-S., et al., "Combination Therapy with BMP-2 and BMSCs Enhances Bone Healing Efficacy of PCL Scaffold Fabricated Using the 3D Plotting System in a Large Segmental Defect Model," Biotechnology Letters, Vol. 34, No. 7, pp. 1375-1384, 2012. https://doi.org/10.1007/s10529-012-0900-0
- Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., et al, "3D Printing of Highly Stretchable and tough Hydrogels into Complex, Cellularized Structures," Advanced Materials, Vol. 27, No. 27, pp. 4035-4040, 2015. https://doi.org/10.1002/adma.201501099
- Wohlers Associates, "Wohlers Report: 3D Printing and Additive Manufacturing State of the Industry," 2016.
- Chia, H. N. and Wu, B. M., "Recent Advances in 3D Printing of Biomaterials," Journal of Biological Engineering, Vol. 9, Paper No. 4, 2015.
- Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., and Mikos, A. G., "Use of Stereolithography to Manufacture Critical-Sized 3D Biodegradable Scaffolds for Bone Ingrowth," Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 64, No. 2, pp. 65-69, 2003.
- Fisher, J. P., Dean, D., and Mikos, A. G., "Photocrosslinking Characteristics and Mechanical Properties of Diethyl Fumarate/Poly (Propylene Fumarate) Biomaterials," Biomaterials, Vol. 23, No. 22, pp. 4333-4343, 2002. https://doi.org/10.1016/S0142-9612(02)00178-3
- Lee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., et al., "Poly (Propylene Fumarate) Bone Tissue Engineering Scaffold Fabrication Using Stereolithography: Effects of Resin Formulations and Laser Parameters," Biomacromolecules, Vol. 8, No. 4, pp. 1077-1084, 2007. https://doi.org/10.1021/bm060834v
- Arcaute, K., Mann, B., and Wicker, R., "Stereolithography of Spatially Controlled Multi-Material Bioactive Poly (Ethylene Glycol) Scaffolds," Acta Biomaterialia, Vol. 6, No. 3, pp. 1047-1054, 2010. https://doi.org/10.1016/j.actbio.2009.08.017
-
Elomaa, L., Teixeira, S., Hakala, R., Korhonen, H., Grijpma, D. W., et al., "Preparation of Poly (
$\varepsilon$ -Caprolactone)-Based Tissue Engineering Scaffolds By Stereolithography," Acta Biomaterialia, Vol. 7, No. 11, pp. 3850-3856, 2011. https://doi.org/10.1016/j.actbio.2011.06.039 - Melchels, F. P. W., Feijen, J., and Grijpma, D. W., "A Poly (D, LLactide) Resin for the Preparation of Tissue Engineering Scaffolds by Stereolithography," Biomaterials, Vol. 30, No. 23, pp. 3801-3809, 2009. https://doi.org/10.1016/j.biomaterials.2009.03.055
- Seck, T. M., Melchels, F .P. W., Feijen, J., and Grijpma, D. W., "Designed Biodegradable Hydrogel Structures Prepared by Stereolithography Using Poly (Ethylene Glycol)/Poly (D, LLactide)-Based Resins," Journal of Controlled Release, Vol. 148, No. 1, pp. 34-41, 2010. https://doi.org/10.1016/j.jconrel.2010.07.111
- Jansen, J., Melchels, F. P., Grijpma, D. W., and Feijen, J., "Fumaric Acid Monoethyl Ester-Functionalized Poly (D, L-Lactide)/N-Vinyl-2-Pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography," Biomacromolecules, Vol. 10, No. 2, pp. 214-220, 2008.
- Shin, J. H., Lee, J. W., Jung, J. H., Cho, D.-W., and Lim, G., "Evaluation of Cell Proliferation and Differentiation on a Poly (Propylene Fumarate) 3D Scaffold Treated with Functional Peptides," Journal of Materials Science, Vol. 46, No. 15, pp. 5282-5287, 2011. https://doi.org/10.1007/s10853-011-5467-y
- Kim, K., Dean, D., Wallace, J., Breithaupt, R., Mikos, A. G., and Fisher, J. P., "The Influence of Stereolithographic Scaffold Architecture and Composition on Osteogenic Signal Expression with Rat Bone Marrow Stromal Cells," Biomaterials, Vol. 32, No. 15, pp. 3750-3763, 2011. https://doi.org/10.1016/j.biomaterials.2011.01.016
- Lee, J. W., Kang, K. S., Lee, S. H., Kim, J.-Y., Lee, B.-K., et al., "Bone Regeneration Using a Microstereolithography-Produced Customized Poly (Propylene Fumarate)/Diethyl Fumarate Photopolymer 3D Scaffold Incorporating BMP-2 Loaded PLGA Microspheres," Biomaterials, Vol. 32, No. 3, pp. 744-752, 2011. https://doi.org/10.1016/j.biomaterials.2010.09.035
- Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., et al., "Fabrication of 3D Biocompatible/Biodegradable Micro-Scaffolds Using Dynamic Mask Projection Microstereolithography," Journal of Materials Processing Technology, Vol. 209, No. 15, pp. 5494-5503, 2009. https://doi.org/10.1016/j.jmatprotec.2009.05.004
- Lee, J. W., Ahn, G., Kim, D. S., and Cho, D.-W., "Development of Nano-and Microscale Composite 3D Scaffolds Using PPF/DEF-HA and Micro-Stereolithography," Microelectronic Engineering, Vol. 86, No. 4, pp. 1465-1467, 2009. https://doi.org/10.1016/j.mee.2008.12.038
- Schuller-Ravoo, S., Feijen, J., and Grijpma, D. W., "Preparation of Flexible and Elastic Poly (Trimethylene Carbonate) Structures by Stereolithography," Macromolecular Bioscience, Vol. 11, No. 12, pp. 1662-1671, 2011. https://doi.org/10.1002/mabi.201100203
- Wang, M. O., Vorwald, C. E., Dreher, M. L., Mott, E. J., Cheng, M. H., et al., "Evaluating 3D-Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering," Advanced Materials, Vol. 27, No. 1, pp. 138-144, 2015. https://doi.org/10.1002/adma.201403943
- Childers, E. P., Wang, M. O., Becker, M. L., Fisher, J. P., and Dean, D., "3D Printing of Resorbable Poly (Propylene Fumarate) Tissue Engineering Scaffolds," MRS Bulletin, Vol. 40, No. 2, pp. 119-126, 2015. https://doi.org/10.1557/mrs.2015.2
- Luo, Y., Dolder, C. K., Walker, J. M., Mishra, R., Dean, D., and Becker, M. L., "Synthesis and Biological Evaluation of Well-Defined Poly (Propylene Fumarate) Oligomers and their Use in 3D Printed Scaffolds," Biomacromolecules, Vol. 17, No. 2, pp. 690-697, 2016. https://doi.org/10.1021/acs.biomac.6b00014
- Ge, Q., Qi, H. J., and Dunn, M. L., "Active Materials by Four-Dimension Printing," Applied Physics Letters, Vol. 103, No. 13, Paper No. 131901, 2013.
- Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., et al., "3D Printing of Shape Memory Polymers for Flexible Electronic Devices," Advanced Materials, Vol. 28, No. 22, pp. 4449-4454, 2015.
- Schmid, M., Amado, A., and Wegener, K., "Materials Perspective of Polymers for Additive Manufacturing with Selective Laser Sintering," Journal of Materials Research, Vol. 29, No. 17, pp. 1824-1832, 2014. https://doi.org/10.1557/jmr.2014.138
- Guvendiren, M., Molde, J., Soares, R. M. D., and Kohn, J., "Designing Biomaterials for 3D Printing," ACS Biomaterials Science & Engineering, Vol. 2, No. 10, pp. 1679-1693, 2016. https://doi.org/10.1021/acsbiomaterials.6b00121
- Van Bael, S., Desmet, T., Chai, Y. C., Pyka, G., Dubruel, P., et al., "In Vitro Cell-Biological Performance and Structural Characterization of Selective Laser Sintered and Plasma Surface Functionalized Polycaprolactone Scaffolds for Bone Regeneration," Materials Science and Engineering: C, Vol. 33, No. 6, pp. 3404-3412, 2013. https://doi.org/10.1016/j.msec.2013.04.024
- Yeong, W. Y., Sudarmadji, N., Yu, H. Y., Chua, C. K., Leong, K. F., et al., "Porous Polycaprolactone Scaffold for Cardiac Tissue Engineering Fabricated By Selective Laser Sintering," Acta Biomaterialia, Vol. 6, No. 6, pp. 2028-2034, 2010. https://doi.org/10.1016/j.actbio.2009.12.033
- Sudarmadji, N., Tan, J. Y., Leong, K. F., Chua, C. K., and Loh, Y. T., "Investigation of the Mechanical Properties and Porosity Relationships in Selective Laser-Sintered Polyhedral for Functionally Graded Scaffolds," Acta Biomaterialia, Vol. 7, No. 2, pp. 530-537, 2011. https://doi.org/10.1016/j.actbio.2010.09.024
- Kang, H., Hollister, S. J., La Marca, F., Park, P., and Lin, C.-Y., "Porous Biodegradable Lumbar Interbody Fusion Cage Design and Fabrication Using Integrated Global-Local Topology Optimization with Laser Sintering," Journal of Biomechanical Engineering, Vol. 135, No. 10, Paper No. 101013, 2013.
-
Liao, H. T., Lee, M. Y., Tsai, W. W., Wang, H. C., and Lu, W. C., "Osteogenesis of Adipose-Derived Stem Cells on Polycaprolactone-
${\beta}$ -Tricalcium Phosphate Scaffold Fabricated Via Selective Laser Sintering and Surface Coating with Collagen Type I," Journal of Tissue Engineering and Regenerative Medicine, Vol. 10, No. 10, pp. E337-E353, 2016. https://doi.org/10.1002/term.1811 - Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., and et al., "Three-Dimensional Nanocomposite Scaffolds Fabricated Via Selective Laser Sintering for Bone Tissue Engineering," Acta Biomaterialia, Vol. 6, No. 12, pp. 4495-4505, 2010. https://doi.org/10.1016/j.actbio.2010.06.024
- Shuai, C., Mao, Z., Lu, H., Nie, Y., Hu, H., et al., "Fabrication of Porous Polyvinyl Alcohol Scaffold for Bone Tissue Engineering Via Selective Laser Sintering," Biofabrication, Vol. 5, No. 1, Paper No. 015014, 2013.
- Wu, B. M., Borland, S. W., Giordano, R. A., Cima, L. G., Sachs, E. M., et al., "Solid Free-Form Fabrication of Drug Delivery Devices," Journal of Controlled Release, Vol. 40, Nos. 1-2, pp. 77-87, 1996. https://doi.org/10.1016/0168-3659(95)00173-5
- Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., et al., "25th Anniversary Article: Engineering Hydrogels for Biofabrication," Advanced Materials, Vol. 25, No. 36, pp. 5011-5028, 2013. https://doi.org/10.1002/adma.201302042
- Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., et al., "3D Printing of Smart Materials: A Review on Recent Progresses in 4D Printing," Virtual and Physical Prototyping, Vol. 10, No. 3, pp. 103-122, 2015. https://doi.org/10.1080/17452759.2015.1097054
- Shim, J.-H., Lee, J.-S., Kim, J. Y., and Cho, D.-W., "Bioprinting of a Mechanically Enhanced Three-Dimensional Dual Cell-Laden Construct for Osteochondral Tissue Engineering Using a Multi-Head Tissue/Organ Building System," Journal of Micromechanics and Microengineering, Vol. 22, No. 8, Paper No. 085014, 2012.
- Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., and Qi, H. J., "Controlled Sequential Shape Changing Components by 3D Printing of Shape Memory Polymer Multimaterials," Procedia IUTAM, Vol. 12, pp. 193-203, 2015. https://doi.org/10.1016/j.piutam.2014.12.021
- Bhattacharjee, N., Urrios, A., Kang, S., and Folch, A., "The Upcoming 3D-Printing Revolution In Microfluidics," Lab on a Chip, Vol. 16, No. 10, pp. 1720-1742, 2016. https://doi.org/10.1039/C6LC00163G
- Lee, K. Y. and Mooney, D. J., "Alginate: Properties and Biomedical Applications," Progress in Polymer Science, Vol. 37, No. 1, pp. 106-126, 2012. https://doi.org/10.1016/j.progpolymsci.2011.06.003
- Ahmadi, F., Oveisi, Z., Samani, S. M., and Amoozgar, Z., "Chitosan Based Hydrogels: Characteristics and Pharmaceutical Applications," Research in Pharmaceutical Sciences, Vol. 10, No. 1, pp. 1-16, 2015.
- Fukushima, K., "Poly (Trimethylene Carbonate)-Based Polymers Engineered for Biodegradable Functional Biomaterials," Biomaterials Science, Vol. 4, No. 1, pp. 9-24, 2016. https://doi.org/10.1039/C5BM00123D
- Lee, H., Venable, R. M., MacKerell, A. D., and Pastor, R. W., "Molecular Dynamics Studies of Polyethylene Oxide and Polyethylene Glycol: Hydrodynamic Radius and Shape Anisotropy," Biophysical Journal, Vol. 95, No. 4, pp. 1590-1599, 2008. https://doi.org/10.1529/biophysj.108.133025
- Sonego, M., Costa, L. C., and Ambrosio, J. D., "Flexible Thermoplastic Composite of Polyvinyl Butyral (PVB) and Waste of Rigid Polyurethane Foam," Polímeros, Vol. 25, No. 2, pp. 175-180, 2015. https://doi.org/10.1590/0104-1428.1944
- Zhang, F., Tuck, C., Hague, R., He, Y., Saleh, E., et al., "Inkjet Printing of Polyimide Insulators for the 3D Printing of Dielectric Materials for Microelectronic Applications," Journal of Applied Polymer Science, Vol. 133, No. 18, Paper No. 43361, 2016.
- Gordon, R., "3D Printers Get New Material," EEtimes, http://www.eetimes.com/author.asp?section_id=36&doc_id=1330596 (Accessed JUN 8 2017)
- Song, H. Y. and Kim, S. H., "A Third Industrial Revolution 3D Prining," KIC News, Vol. 18, No. 1, pp. 27-44, 2015.
- Innocenzi, P., Figus, C., Kidchob, T., Valentini, M., Alonso, B., et al., "Sol-Gel Reactions of 3-Glycidoxypropyltrimethoxysilane in a Highly Basic Aqueous Solution," Dalton Transactions, No. 42, pp. 9146-9152, 2009.