한국건설관리학회논문집 (Korean Journal of Construction Engineering and Management)

  • 제18권6호
  • /
  • Pages.98-108
  • /
  • 2017
  • /
  • 2005-6095(pISSN)
  • /
  • 2465-9703(eISSN)
한국건설관리학회 (Korea Institute of Construction Engineering and Management)
권호 표지
DOI QR코드

DOI QR Code

모듈러 공법의 시공 프로세스 기반 시공 오차 관리 의사 결정 모델

Decision Model of Construction Errors Management Based on Modular Method Construction Process

  • Shin, HyunKyu (School of Architecture & Architectural Engineering, Hanyang University ERICA) ;
  • Kim, SuYoung (SAMSUNG DISPLAY Construction Planning Group) ;
  • Ahn, YongHan (School of Architecture & Architectural Engineering, Hanyang University ERICA)
  • 투고 : 2017.09.23
  • 심사 : 2017.11.21
  • 발행 : 2017.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

최근 모듈러 공법을 활용한 중 고층 건축 기술이 개발되면서 현장 시공 오차 관리의 중요성이 부각되었다. 모듈러 공법은 공장 생산 특성 때문에 현장에서 시공 오차를 조정하는 것이 매우 제한적이다. 따라서 시공 오차를 사전에 예방하기 위해서는 모듈러 공법 특성을 반영한 관리 방안이 필요하며 각 단계별 공사 참여자의 의사 결정이 중요하다. 이에 본 연구에서는 모듈러 공사 시공 오차 요인을 분석하고, 시공 프로세스 기반의 시공 오차 관리 방안 의사 결정 지원 모델을 제안하였다. 본 연구의 결과물은 모듈러 공사 참여자가 시공 오차 관리 방안을 도출하는데 가이드라인 역할을 할 수 있을 것이라 기대한다.

Recently, the development of middle and high-rise building technology using modular construction method has emphasized the importance of site construction error management. The modular construction method is very limited to adjust the construction error in the field because of the factory production characteristics. Therefore, in order to prevent the construction error in advance, a management plan reflecting the characteristics of the modular construction method is required, and it is important to make the decision of the construction participant at each stage. This study analyzed the factor of construction error of modular construction and suggested a decision support model for construction error management based on construction process. The result of this study is expected to be a guideline for the modular construction participant to derive the construction error management plan.

키워드

참고문헌

  1. Ahn, Y. S. (1990). "A Field Survey & Analysis of Physical Deviations of Concrete Structures in Apartment Houses -I. Focus on Choosing Element & Measuring Method-" Journal of the Architectural Institute of Korea, 6(4), pp. 271-279.
  2. Ahn, Y. S. (1996). "A Study on the Dimensional Tolerance analysis for Establishing Component- Systematized Building Production" Journal of the Architectural Institute of Korea, 12(2), pp. 209-216.
  3. Ahn, S. H. (2015). "A Case Study of the Risk Identification in Construction Project" Korean Journal of Construction Engineering and Management, KICEM, 11(2), pp. 74-82. https://doi.org/10.6106/KJCEM.2010.11.2.74
  4. Aleshin, A., and Dworatsch, S. (1997). "Risk Management of Joint of Joint Venture Construction Projects of Foreign Coorperation in Russia"PMI 28th Annual Seminars & Symposium, PMI, pp. 221-226.
  5. Choi, J. H., and Ryu, H. G. (2015). "Application and Effects Analysis of BIM(Building Information Modeling for Construction Management of a Construction Field" Journal of the Korea Institute of Building Construction, 15(1), pp. 115-121. https://doi.org/10.5345/JKIBC.2015.15.1.115
  6. Chun, J. Y., and Oh, S. J. (2003). "Constitutional Directions of Decision Suppert Process for Cooperative Design in Architectural Design Phase" Journal of the Korea Institute of Building Construction, 19(11), pp. 173-180.
  7. Harrell, T. J., Pinon. J. P., and Shane, C. D. (2016). "Building Enclosure Design for Modular Construction" Proceedings of the 3rd Residential Building Design & Construction Conference, pp. 12-28.
  8. International Atomic Energy Agency (IAEA) (2015). Development and Implementation of a Process Based Management System, Nuclear Energy Series Report, pp. 4-12.
  9. Jaafari, A. (1994). "Total Project Risk Management Aided by Information Systems" 12th Internet World Congress on Porject Management, Proceedings. 2, pp. 311-317.
  10. Johnsson, H., and Meiling, J. H. (2009). "Defects in offsite construction : timber module prefabrication" Construction Management and Economics, 27(7), pp. 667-681. https://doi.org/10.1080/01446190903002797
  11. Joseph, M. S. (2012). A Case Study Approach to Identifying the Constraints and Barriers to Design Innovation for Modular Construction (Master of Science in Architecture), Virgina Polytechnic Institute and State University, Blacksburg, Virgina.
  12. Kang, K. I., and Kim, J. Y. (2001). "A Study on Cause of Faulty Work in Korean Apartment Housing - Focused on the Form Works and Concrete Works" Journal of the Architectural Institute of Korea Structure & Construction, 17(2), pp. 121-128.
  13. Lawson, R, M., and Richards, J. (2010). "Modular Design for High-rise Buildings" Proceedings of the Institution of Civil Engineers, 163(3), pp. 151-164.
  14. Lee, J. S., and Chun, J. Y. (2010). "Decision Making Process for Alternative Selection of Proper Design Change in Construction Project" Korean Journal of Construction Engineering and Management, KICEM, 11(2), pp. 74-82. https://doi.org/10.6106/KJCEM.2010.11.2.74
  15. Lawson, R, M., Ogden, R. G., and Goodier, C. (2014). Design in Modular Construction. 1st, Taylor & Francis Group, United Kingdom, pp. 11-14.
  16. Matthew, S. G. (1989). A Quality Control Program Analysis for Modular Housings (Masters of Engineering), The Pennsylvania State University, State College, Pennsylvania.
  17. Mayra, L. (1994). A review and analysis of modular construction practices (Masters of Science in Civil Engineering), Lehigh University, Bethlehem, Pennsylvania
  18. Mootanah, D. P. (1997). "A Holistic Framework for Managing Risks in Construction Projects" PMI 28th Annual Seminal & Symposium, PMI, pp. 1056-1062.
  19. Sacks, R., Eastman, C. M., and Lee, G. (2004). "Process Model Perspectives on Management and Engineering Procedures in the Precast/Prestressed Concrete Industry" Journal of Construction Engineering and Management, 130(2), pp. 206-215. https://doi.org/10.1061/(ASCE)0733-9364(2004)130:2(206)
  20. Shin, D. W., Shin, Y. S., and Kim, G. H. (2015). "Analysis on Risk Factors of Reactor Containment Building Construction using analytic Hierarchy Process" Journal of the Korea Institute of Building Construction, 15(4), pp. 425-431. https://doi.org/10.5345/JKIBC.2015.15.4.425
  21. Shin, H. K., and Ahn, Y. H. (2016). "Modular Building Construction Process Development by Benchmarking International Best Practices" Korean Journal of Construction Engineering and Management, KICEM, 17(6), pp. 3-12. https://doi.org/10.6106/KJCEM.2016.17.6.003
  22. SKANSKA (2014). "Skanska Termination Letter Atlantic Yards B2 Project" (April. 22, 2016)
  23. Sorri, J., Kahkonen, K., and Rannisto, J. (2013). "Construction Business with Innovative Cellular Structures, Modules and Buildings" Proceeding of the 19th CIB World Building Congress 2013, Number : 245.
  24. Yoon, S. C., Jee, N. Y., and Choi, k. B. (2010). "Field Survey on the Construction Errors for the Members of Reinforced Concrete Structures" Korean Journal of Construction Engineering and Management, KICEM, 16(1), pp. 15-23.
  25. Yoon, Y. S., Suh, S. W., Park, M. S., and Jang, M. H. (2008). "Construction Process based Schedule Risk Management System" Korean Journal of Construction Engineering and Management, KICEM, 9(4), pp. 101-110.
  26. Zavadskas, E. K., Turskis, Z., and Tamositiene, J. (2010). "Risk Assessment of Construction Projects" Journal of Civil Engineering and Management, 16(1), pp. 33-46. https://doi.org/10.3846/jcem.2010.03