DOI QR코드

DOI QR Code

성숙도 방법을 이용한 불포화 폴리에스터 수지 폴리머 콘크리트의 압축강도 예측

Prediction of Compressive Strength of Unsaturated Polyester Resin Based Polymer Concrete Using Maturity Method

  • Choi, Ki-Bong (Department of Architectural Engineering, Gachon University) ;
  • Jin, Nan Ji (Dongil Engineering Consultants Co., Ltd.) ;
  • Lee, Youn-Su (Department of National Defence Construction, Chungbuk Health & Science University) ;
  • Yeon, Kyu-Seok (Department of Regional Infrastructure Engineering, Kangwon National University)
  • 투고 : 2017.09.04
  • 심사 : 2017.09.20
  • 발행 : 2017.11.30

초록

This study investigated to predict the compressive strength of unsaturated polyester resin based polymer concrete using the maturity method. The test results show that the development of the compressive strength increased exponentially until an age of 24 hours. After 24 hours, the development of the compressive strength just increased gradually. This test result shows that the strength of unsaturated polyester resin based polymer concrete was developed mainly at the early age. Estimated datum temperature of unsaturated polyester resin based polymer concrete was $-20.67^{\circ}C$ which was much lower than of datum temperature ($-10^{\circ}C$) of Portland cement concrete. Also, this study result shows that the existing maturity index associated with Portland cement concrete was not applicable for polymer concrete because curing time of Portland cement concrete is different clearly with curing time of polymer concrete. The cause of different curing time was that there were different curing mechanisms between Portland cement concrete and polymer concrete. In order to best apply the experimental data to a model, CurveExpert Professional, the commercial software, was used to determine the predictive model regarding the compressive strength of unsaturated polyester resin based polymer concrete. As a result, Gompertz Relation or Weibull Model was an appropriate model as a predictive model. The proposed model can be used to predict the compressive strength, especially, it is more useful when the maturity is in the range between $40^{\circ}C{\cdot}h^{0.4}$ and $900^{\circ}C{\cdot}h^{0.4}$.

키워드

참고문헌

  1. Agavriloaie, L., S. Opreal, M. Barbuta, and F. Luca, 2012. Charaterisation of polymer concrete with epoxy polyurethane acryl matrix, Journal of Construction and Building Materials 37: 190-196. https://doi.org/10.1016/j.conbuildmat.2012.07.037
  2. Bergstorm, S. G., 1953. Curing temperature, age and strength of concrete, Magazine of Concrete Research 5(14): 61-66. https://doi.org/10.1680/macr.1953.5.14.61
  3. Carino, N. J., H. S. Lew, and C. K. Volz, 1983. Early age temperature effects on concrete strength prediction by the maturity method, ACI Journal 80(10): 93-101.
  4. Carino, N. J. and H. S. Lew, 2001. The maturity method : From theory to application, Reprinted from the Proceedings of the 2001 Structures Congress & Exposition.
  5. Chandra, S. and Y. Ohama, 1994. Polymers in concrete. CRC Press 81-102.
  6. Chengju, G., 1989. Maturity of concrete : Method for predicting early-stage strength, ACI Materials Journal 86(4): 341-353.
  7. Chin, F. K., 1971. Relation between strength and maturity of concrete, ACI Journal Proceedings 68(3): 196-203.
  8. El-Hawary, M. M., and H. Abdel-Fattah, 2000. Temperature effect on the mechanical behavior of resin concrete, Journal of Construction and Building Materials 14: 317-323. https://doi.org/10.1016/S0950-0618(00)00032-5
  9. Fowler, D. W., 1989. Future trends in polymer concrete. Polymers in Concrete: Advances and Applications, ACI SP- 116: 129-143.
  10. Freiesleben Hansen, P. and E. J. Pedersen, 1985. Curing of concrete structures", CEB Information Bulletin 166.
  11. Gorninski, J. P., D. C. Dal Molin, and C. S. Kazimerczac, 2004. Study of the modulus of elasticity of polymer concrete compounds and comparative assessment of polymer concrete and portland cement concrete, Journal of Cement and Concrete Research 34: 2091-2095. https://doi.org/10.1016/j.cemconres.2004.03.012
  12. Haddad, M. U., D. W. Fowler, and D. R. Paul, 1983. Factors affecting the curing and strength of polymer concrete. ACI Journal Proceedings 80(5): 396-402.
  13. Hulshizer, A. J., M. A. Edgar, R. E. Daniels, J. D. Suminsby, and G. E. Myers, 1984. Maturity concept proves effective in reducing form removal time and winter curing cost, ACI SP 82-18: 351-376.
  14. Hyun, S. H. and J. H. Yeon, 2012. Strength development characteristics of UP-MMA based polymer concrete with different curing temperature. Construction and Building Materials 387-397.
  15. Lew, H. S. and T. W. Reichard, 1978 Prediction of strength of concrete from maturity, ACI SP 56-14: 229-248.
  16. Li, Q., J. Guan, Z. Wu, W. Dong, and S. Zhou, 2016. Equivalent maturity for ambient temperature effect on fracture parameters of site-casting dam concrete, Construction and Building Materials 120: 293-308. https://doi.org/10.1016/j.conbuildmat.2016.05.111
  17. Ohama, Y., 1973. Mix proportions and properties of polyester resin concretes. Polymers in Concrete, ACI SP-40: 283-294.
  18. Ohama, Y. and O. Demura, 1981. Mix proportioning and mechanical properties of polymethyl methacrylate resin concrete, Transactions of the Japan Concrete Institute 3: 441-448.
  19. Ohama, Y. and M. Hamatsu, 1987. Incombustibility of polymer concretes made with wet aggregates, ACI SP-99: 151-164.
  20. Ohama, Y., K. Demura, Y. S. Lee, and K. S. Yeon, 2000. Compressive strength prediction of polyester mortars by the maturity method, Proc. Int. Symp. on Brittle Matrix Composites, Warsaw, Poland 439-448.
  21. Oluokun, F. A., E. G. Burdette, and J. H. Deatherage, 1990. Early-age concrete strength prediction by maturity, ACI Materials Journal 87(6): 565-572.
  22. Oussama, E., G. Elhem, M. Valerie, and B. O. Mongi, 2012. Mechanical and physical properties of epoxy polymer concrete after exposure to temperature up to $$250^{\circ}C$. Journal of Construction and Building Materials 27: 415-424. https://doi.org/10.1016/j.conbuildmat.2011.07.027
  23. Pinto, R. C. and K. C. Hover, 1999. Application of maturity approach to setting time, Journal of the American Concrete Institute 686-691.
  24. Plowman, J. M., 1956. Maturity and the strength of concrete, Magazine of Concrete Research 8(22): 13-22. https://doi.org/10.1680/macr.1956.8.22.13
  25. Saul, A. G. A., 1951. Principles underlying the steam curing of concrete at atmospheric pressure, Magazine of Concrete Research 2(6): 127-140. https://doi.org/10.1680/macr.1951.2.6.127
  26. Son, S. W. and J. H. Yeon, 2012. Mechanical properties of acrylic polymer concrete containing methacrylic acid as an additive, Journal of Construction and Building Materials 37: 669-679. https://doi.org/10.1016/j.conbuildmat.2012.07.093
  27. Topcu, I. B. and M. U. Toprak, 2005. Fine aggregate and curing temperature effect on concrete maturity, Journal of Cement and Concrete Research 35: 758-762. https://doi.org/10.1016/j.cemconres.2004.04.023
  28. Vipulanandan, C., N. Dharmarajan, and E. Ching, 1988. Mechanical behaviour of polymer concrete system. Journal of Materials and Structures 21: 268-277. https://doi.org/10.1007/BF02481825
  29. Yikici, T. A. and H. L. Chen, 2015. Use of maturity method to estimate compressive strength of mass concrete, Construction and Building Materials 95: 802-812. https://doi.org/10.1016/j.conbuildmat.2015.07.026