DOI QR코드

DOI QR Code

Optimum Design of the Drone Single Arm Using Co-rotational Plane Beam-Dynamic Tip Load

Co-rotational Plane Beam-Dynamic Tip Load를 이용한 Drone Single Arm의 최적 설계

  • Park, SunHoo (Department of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Lee, SangGu (Department of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Shin, SangJoon (Department of Mechanical and Aerospace Engineering, Seoul National University)
  • Received : 2017.06.22
  • Accepted : 2017.09.11
  • Published : 2017.10.01

Abstract

This paper aims to build a drone platform based on an optimum design of its single arm. Its single arm is assumed as a cantilevered beam with a tip mass. Based on the numerical optimization theory, validation and optimization of a new design is conducted by comparing the results with the similar ones obtained by ANSYS. Finally, this design is reflected in the control simulation, and the requirement of an optimum structural design considering the resonance situation is satisfied.

본 논문에서는 단일 보의 최적 설계를 활용하여 드론 플랫폼을 구축하였다. 단일 보를 끝 단 질량을 가진 외팔보로 가정하였다. 수치 최적화 이론에 기초하여, ANSYS가 얻은 유사한 결과와 비교함으로써 새로운 설계의 검증 및 최적화를 수행 하였다. 마지막으로, 이 설계는 제어 시뮬레이션에 반영되며 공진 상황을 고려한 최적의 구조 설계 요구 사항을 만족함을 보였다.

Keywords

References

  1. Lee, A.U., Drone market and industry trend, KIST Fusion Research Policy Center, Weekly TIP, vol. 53, 2017, pp.1-13
  2. Jeong, J.H., Development history of drnoe and future market prospect, KISA Report, Power Review, vol. 5, 2015, pp.3-10
  3. Le, T.N., Battini, J.M., and Hjiaj, M., "Efficient Formulation for Dynamics of Corotational 2D Beams," Computational Mechanics, Vol. 48, No. 2, 2011, pp.153-161 https://doi.org/10.1007/s00466-011-0585-6
  4. Singiresu, S.R., Mechanical Vibrations, Edition, Pearson, pp. 721-739, 2011
  5. Kreysizg, E.W., Advanced Engineering Mathematics, Edition, WILEY, 2011, pp.950-969
  6. Hinnat, H., E.., "Nonlinear Analysis of a Cantilever Beam," AIAA Journal, Vol. 26, No. 2, 1988, pp.1521-1527 https://doi.org/10.2514/3.10072
  7. Mizui, M., "Resonance Analysis of the UAV Rotor-arm part," IOSR Journal of Engineering, Vol. 2, No. 8, 2012, pp.28-32
  8. Kim, M. S., Kim, J. N., Shiffraw, T.A., and Kang, B.S., "Vibration Characteristics Analysis of Quad-rotor Type Rotor-Arm," Proceeding of The Korean Society for Aeronautical and Space Sciences Fall Conference, November 2015, pp. 938-941
  9. Kim, S., Kim, Y., and Park, C., "Study on Vibration Characteristics in Terms of Airfoil Cross-Sectional Shape by using Co-Rotational Plane Beam Transient Analysis," Computational Structural Engineering Institute of Korea, Vol. 29 No. 5, 2016, pp.389-395 https://doi.org/10.7734/COSEIK.2016.29.5.389
  10. Behzad, A, Z., Furquan, A., and Lee, C, Y., "Structural Optimization of Cantilever Beam in Conjunction with Dynamic Analysis," Korea Institute of GAS, Vol. 15, No. 5, 2011, pp.31-36
  11. Sasidhar, G., and Deepak K., "Weight and deflection optimization of Cantilever Beam using a modified Non-Dominated sorting Genetic Algorithm," IOSR Journal of Engineering, Vol. 4, No. 3, 2014, pp.19-23
  12. Yang, X., "Curve fitting and fairing using conic splines," Computer-Aided Design, Vol. 36, No. 5 , 2004, pp.461-472 https://doi.org/10.1016/S0010-4485(03)00119-2
  13. Walling, D. D., "Numerical methods for non-linear least squares curve fitting," Retrospective Theses and Dissertations, Paper 2949 , Iowa State University, 1963
  14. Park, S., and Moon, G., "Simulation and Embedded System Research for Attitude Stabilization Performance of RC Quad-Copter", Bachelor's Thesis, Handong Global University , 2015
  15. T-MOTOR company motor, http://www.rctigermotor.com/html/2013/Power-Type_0928/93.html
  16. T-MOTOR company motor, http://www.rctigermotor.com/html/2014/Efficiency-Type_0314/198.html
  17. University of CAMBRIDGE TLP Library, http://doitpoms.admin.cam.ac.uk/tlplib/thermal-expansion/expt1.php