한국도로학회논문집 (International Journal of Highway Engineering)

  • 제19권4호
  • /
  • Pages.27-36
  • /
  • 2017
  • /
  • 1738-7159(pISSN)
  • /
  • 2287-3678(eISSN)
한국도로학회 (Korean Society of Road Engineers)
권호 표지
DOI QR코드

DOI QR Code

도로 부대시설 지주구조물 설계를 위한 풍하중조합의 신뢰도 분석

Reliability Analysis of Design Wind Load Combination for Support Structures of Subsidiary Road Facilities

  • 김근옥 (가천대학교 공과대학 토목환경공학과) ;
  • 안상섭 (한국도로공사 도로교통연구원) ;
  • 김호경 (서울대학교 공과대학 건설환경공학부) ;
  • 조경식 (DM 엔지니어링) ;
  • 백인열 (가천대학교 공과대학 토목환경공학과)
  • 투고 : 2017.05.23
  • 심사 : 2017.07.28
  • 발행 : 2017.08.16
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSES : The purpose of this study is to perform a reliability analysis of the proposed wind load combination which governs the design of support structures of subsidiary road facilities, and to evaluate whether the target reliability of the design is satisfied. METHODS : The statistical estimation method is applied and the design period of the support structure is used to obtain the statistical property of the wind load. In addition, the statistical properties of the strength of support structures are obtained from a literature review and simulation study. Actual support structures are designed by the proposed load combination and are used as the examples to examine if the target reliability is obtained. RESULTS : The result of the reliability analysis performed by using the statistical properties of load and resistance for the support structure in this study indicates that the proposed wind load combination satisfied the target reliability index of the design. Also, the convenience of the design is achieved by adopting the same design wind velocity given in the bridge design code by applying the wind velocity ratio defined for the design period of the support structure. CONCLUSIONS : It is presented that the design using the wind load combination proposed in this study achieved the target reliability index and the design wind load for different design periods can be conveniently defined by applying the velocity ratio proposed in this study.

키워드

참고문헌

  1. American Association of State Highway and Transportation Officials (AASHTO), 2013. AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals, 6th ed., Washington, D.C.
  2. American Association of State Highway and Transportation Officials (AASHTO), 2015. AASHTO LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals, 1st ed., Washington, D.C.
  3. Ang, A.H-S., and Tang, W.H., 1975. Probability Concepts in Engineering Planning and Design, Volume I - Basic Principles, Wiley & Sons, pp.172-179, 300-301.
  4. DM Engineering Co, Goryeo Software Co, 2015 Development of Design Criteria and Program for Improving Performance of Highway Support Structure, Korea Expressway and Transportation Research Institute.
  5. Farrow, C. B., 1992. Tensile Capacity of Anchors With Partial or Overlapping Failure Surfaces: Evaluation of Existing Formulas on An LRFD Basis, Master Thesis of Texas at Austin.
  6. Farrow, C. B., Frigui, I., Klingner, R. E., 1995. Tensile Capacity of Single Anchors In Concrete: Evaluation of Existing Formula on an LRFD Basis, American Concrete Institute Structural Journal.
  7. Ghosn, M., Mose, F., and Wang, J, 2003. NCHRP Report 489 : Design of Highway Bridges for Extreme Events, Transportation Research Board, National Cooperative Highway Research Program, Washington, D.C.
  8. Highways England, 1998. BD 51/98 Volume 2 Highway Structures: Design (Sub-Structures and Special Structures), and Materials Section 2 Special Structures, Design Manual of Road and Bridges (DMRB).
  9. Kim, I. H., Choi, D., Chun, S., Lee, D., Yang, M., 2004. Comparison of Domestic Anchor Experiment Strength and Design Strength, Korea Concrete Institute Research Association Technical Committee.
  10. Korea Concrete Institute (KCI), 2012. Concrete Structure Standard, Korea Concrete Institute.
  11. Korea Expressway Corporation (KEC), 2002. Review of Soundproof Wall Design Wind Load, Korea Expressway Corporation.
  12. Korea Expressway Corporation (KEC), 2004. Review of Sign for Design Wind Load, Korea Expressway Corporation.
  13. Lee, S. H., 2014. Calibration of the Load-Resistance Factors for the Reliability-based Design of Cable-supported Bridges, Seoul National University Doctorate thesis, pp.115-119.
  14. Ministry of Land, Transportation and Maritime Affairs (MLTM), 2010. Basic Standard for Soundproof wall, Korea Ministry of Land, Transportation and Maritime Affairs.
  15. Ministry of Land, Transportation and Maritime Affairs (MLTM), 2015a. Korea Highway Bridge Design Code (KHBDC) - Limit State Design Method, Korea Ministry of Land, Transportation and Maritime Affairs.
  16. Ministry of Land, Transportation and Maritime Affairs (MLTM), 2015b. Korea Highway Bridge Design Code (KHBDC) - Limit State Design Method for Cable Bridge, Korea Ministry of Land, Transportation and Maritime Affairs.
  17. Muratli, H., 1998. Behavior of Shear Anchors in Concrete: Statistical Analysis and Design Recommendations, Master Thesis of Texas at Austin.
  18. Muratli, H., Klingner, R. E., Herman, L., Graves, III, 2004. Breakout Capacity of Anchors in Concrete-Part 2: Shear, American Concrete Institute Structural Journal.
  19. Nowak, A. S., Collins, K. R., 2000. Reliability of Structures, McGraw-Hill, pp.181-184.
  20. Shin, D. G., 2005. R&D on Core Technology for Bridge Design, Second Year Report, Korea Ministry of Land, Transportation and Maritime Affairs.