Steel and Composite Structures

  • 제25권4호
  • /
  • Pages.457-472
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behavior of concrete-filled round-ended steel tubes under bending

  • Ding, Fa-xing (School of Civil Engineering, Central South University) ;
  • Zhang, Tao (School of Civil Engineering, Central South University) ;
  • Wang, Liping (School of Civil Engineering, Central South University) ;
  • Fu, Lei (School of Civil Engineering, Central South University)
  • 투고 : 2017.04.06
  • 심사 : 2017.09.01
  • 발행 : 2017.11.20
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this paper is to investigate the flexural behavior of concrete-filled round-ended steel tubes (CFRTs) under bending. Beam specimens were tested to investigate the mechanical behavior of the CFRTs, including four CFTs with different concrete strengths and steel ratios, and three CFRTs with varied aspect ratios. The load vs. deflection relationships and the failure modes for CFRTs were analyzed in detail. The composite action between the core concrete and steel tube was also discussed and examined based on the experimental results. In addition, ABAQUS program was used to develop the full-scale finite element model and analyze the effect of different parameters on the moment vs. curvature curves of the CFRTs bending about the major and minor axis, respectively. Furthermore, design formulas were proposed to estimate the ultimate moment and the flexural stiffness of the CFRTs, and the simplified theoretical model of the moment vs. curvature curves was also developed. The predicted results showed satisfactory agreement with the experimental and FE results. Finally, the differences of the experimental, FE and predicted results using the existing codes were illustrated.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. AIJ (1997), Recommendations for Design and Construction of Concrete Filled Steel Tubular Structures, Architectural Institute of Japan, Tokoy.
  2. AISC (1999), Load and Resistance Factor Design Specification for Structural Steel Buildings (IL), American Institute of Steel Construction, Chicago.
  3. Aslani, F., Uy, B. and Tao, Z. (2015), "Predicting the axial load capacity of high-strength concrete filled steel tubular columns", Steel Compos. Struct., 19(4), 967-993. https://doi.org/10.12989/scs.2015.19.4.967
  4. BS5400 (2005), Part 5. Concrete and Composite Bridges, British Standards Institutions, London.
  5. CECS28 (2012), Technical Specification for Concrete-Filled Steel Tubular Structures, China Planning Press, Beijing, China.
  6. Chang, X., Luo, X.L., Zhu, C.X. and Tang, C.N. (2014), "Analysis of circular concrete-filled steel tube support in high ground stress conditions", Tunn. Undergr. Sp Tech., 43(6), 41-48. https://doi.org/10.1016/j.tust.2014.04.002
  7. Chang, X., Ru, Z.L., Zhou, W. and Zhang, Y.B. (2013), "Study on concrete-filled stainless steel carbon steel tubular (CFSCT) stub columns under compression", Thin Wall. Struct., 63(2), 125-133. https://doi.org/10.1016/j.tws.2012.10.002
  8. Chen, B.L. and Wang, L.G. (2015), "Experimental study on flexural behavior of splicing concrete-filled gfrp tubular composite members connected with steel bars", Steel Compos. Struct., 18(5), 1129-1144. https://doi.org/10.12989/scs.2015.18.5.1129
  9. Chen, J., Wang, J. and Xie, F. (2016), "Behavior of thin-walled dodecagonal section double skin concrete-filled steel tubes under bending", Thin Wall. Struct., 98(1), 293-300. https://doi.org/10.1016/j.tws.2015.10.002
  10. Chitawadagi, M.V. and Narasimhan, M.C. (2009), "Strength deformation behaviour of circular concrete filled steel tubes subjected to pure bending", J. Constr. Steel Res., 65(5), 1567-1591.
  11. DBJ13-51-2003 (2003), Technical Code for Concrete Filled Steel Tubular Structures, Housing and Urban-Rural Development of Fujian, Fuzhou, China.
  12. Ding, F.X., Fu, L. and Liu, X.M. (2016), "Mechanical performances of track-shaped rebar stiffened concrete-filled steel tubular (SCFRT) stub columns under axial compression", Thin Wall. Struct., 99(2), 168-181. https://doi.org/10.1016/j.tws.2015.11.022
  13. Ding, F.X., Fu, L. and Yu, Z.W. (2015), "Mechanical performance of concrete-filled steel tubular stub columns with round ends under axial loading", Thin Wall. Struct., 97(12), 22-34. https://doi.org/10.1016/j.tws.2015.07.021
  14. DL/T5085-1999 (1999), Code for Design of Steel-Concrete Composite Structure, China Electric Power Press, Beijing, China.
  15. Eurocode 4 (2004), Design of Steel and Concrete Structures. Part1. 1: General Rules and Rules for Building, European Committee for Standardization, Brussels (Belgium).
  16. GB/T228-2002, China Standard (2002), Metallic materials-tensile testing at ambient temperatures, Standards Press of China, Beijing, China.
  17. GB/T50081-2002, China Standard (2002), Standard for method of mechanical properties on ordinary concrete, China Building Industry Press, Beijing, China.
  18. GB50936-2014 (2014), Technical Code for Concrete Filled Steel Tubular Structures, China Building Industry Press, Beijing, China.
  19. Han, L.H., Lu, H. and Yao, G.H. (2006), "Further study on the flexural behavior of concrete-filled steel tubes", J. Constr. Steel Res., 62(6), 554-565. https://doi.org/10.1016/j.jcsr.2005.09.002
  20. Hassanein, M.F. and Kharoob, O.F. (2014), "Analysis of circular concrete-filled double skin tubular slender columns with external stainless steel tube", Thin Wall. Struct., 79(6), 23-37. https://doi.org/10.1016/j.tws.2014.01.008
  21. Hassanein, M.F., Kharoob, O.F. and Liang, Q.Q. (2013), "Circular concrete-filled double skin tubular short columns with external stainless steel tubes under axial compression", Thin Wall. Struct., 73(12), 252-263. https://doi.org/10.1016/j.tws.2013.08.017
  22. Hibbitt, Karlson & Sorensen Inc. (2003), ABAQUS/standard User's Manual, Version 6.4.1.,Pawtucket, RI, USA.
  23. Kim, J.K., Kwak, H.G. and Kwak, J.H. (2013), "Behavior of hybrid double skin concrete filled circular steel tube columns", Steel Compos. Struct., 14(14), 191-204. https://doi.org/10.12989/scs.2013.14.2.191
  24. Liu, J., Ding, F.X., Liu, X.M. and Yu, Z.W. (2016), "Study on flexural capacity of simply supported steel-concrete composite beam", Steel Compos. Struct., 21(4), 829-847. https://doi.org/10.12989/scs.2016.21.4.829
  25. Moon, J., Roeder, C.W. and Lehman, D.E. (2012), "Analytical modeling of bending of circular concrete filled steel tubes", Eng. Struct., 42(7), 58-66.
  26. Uenaka, K. and Tsunokake, H. (2016), "Concrete filled elliptical steel tubular members with large diameter-to-thickness ratio subjected to bending", Structures., 5(2), 58-66. https://doi.org/10.1016/j.istruc.2015.08.004
  27. Uenaka, K., Kitoh, H. and Sonoda, K. (2008), "Concrete filled double skin tubular members subjected to bending", Steel Compos. Struct., 8(4), 297-312. https://doi.org/10.12989/scs.2008.8.4.297
  28. Wan, C.Y. and Zha, X.X. (2016), "Nonlinear analysis and design of concrete-filled dual steel tubular columns under axial loading", Steel Compos. Struct., 20(3), 571-597. https://doi.org/10.12989/scs.2016.20.3.571
  29. Wang, Q.T. and Chang, X. (2013), "Analysis of concrete-filled steel tubular columns with "T" shaped cross section (CFTTS)", Steel Compos. Struct., 15(1), 41-45. https://doi.org/10.12989/scs.2013.15.1.41
  30. Wang, R., Han, L.H. and Nie, J.G. (2014), "Flexural performance of rectangular CFST members", Thin Wall. Struct., 79(6), 154-165. https://doi.org/10.1016/j.tws.2014.02.015
  31. Xie, J.X., Tang, P.Z. and Lu, A. (2011), "Modal analysis and experimental study on round-ended CFST coupled column cable stayed bridge, Mechanic Automation and Control Engineering (MACE)", Proceedings of the 2nd International Conference on. IEEE.