Steel and Composite Structures

  • 제25권4호
  • /
  • Pages.427-442
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Damped frequencies of precast modular steel-concrete composite railway track slabs

  • Kaewunruen, Sakdirat (Birmingham Centre for Railway Research and Education, School of Engineering, University of Birmingham) ;
  • Kimani, Stephen Kimindiri (Department of Civil Engineering, School of Engineering, University of Birmingham)
  • 투고 : 2017.03.27
  • 심사 : 2017.08.04
  • 발행 : 2017.11.20
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents unprecedented damped oscillation behaviours of a precast steel-concrete composite slab panel for track support. The steel-concrete composite slab track is an innovative slab track, a form of ballastless track which is becoming increasingly attractive to asset owners as they seek to reduce lifecycle costs and deal with increasing rail traffic speeds. The slender nature of the slab panel due to its reduced depth of construction makes it susceptible to vibration problems. The aim of the study is driven by the need to address the limited research available to date on the dynamic behaviour of steel-concrete composite slab panels for track support. Free vibration analysis of the track slab has been carried out using ABAQUS. Both undamped and damped eigenfrequencies and eigenmodes have been extracted using the Lancsoz method. The fundamental natural frequencies of the slab panel have been identified together with corresponding mode shapes. To investigate the sensitivity of the natural frequencies and mode shapes, parametric studies have been established, considering concrete strength and mass and steel's modulus of elasticity. This study is the world first to observe crossover phenomena that result in the inversion of the natural orders without interaction. It also reveals that replacement of the steel with aluminium or carbon fibre sheeting can only marginally reduce the natural frequencies of the slab panel.

키워드

참고문헌

  1. ACP Composites (2016), High modulus carbon fibre. Available at:http://www.acpsales.com/home.html (Accessed on 1st July 2016).
  2. Benedettini, F., Zulli, D. and Allagio, R. (2009), "Frequencyveering and mode hybridization in arch bridges", Proceedings of the IMAC-XXVII, February 9-12 Orlando, Florida USA.
  3. Bezin, Y. and Farrington, D. (2010), "A structural study of an innovative steel-concrete track structure", Proc. Inst. Mech. Eng. Part F: J. Rail Rapid Transit., 224, 245-257. https://doi.org/10.1243/09544097JRRT340
  4. Bradford, M. and Uy, B. (2007), "Composite action of sructural steel beams and precast concrete slabs for the flexural strength limit state", Aust. J. Struct. Eng., 7(2), 123-133. https://doi.org/10.1080/13287982.2007.11464970
  5. Britpave (2016), Why slab track. Available at: http://www.britpave.org.uk/RailWhyBuild.ink (Accessed: 9th July 2016).
  6. British Standards Institution (2002), BS EN 1991-1-1:2002 Eurocode 1-Actions on structures - Part 1-1: general actions - densities, self-weight, imposed loads for buildings. London: BSI.
  7. British Standards Institution (2004), BS EN 1992-1-1:2004 Eurocode 2- Design of concrete structures - Part 1-1: general rules and rules for buildings. London: BSI.
  8. British Standards Institution (2005), BS EN 1993-1-1:2005 Eurocode 3 - Design of steel structures - Part 1-1: general rules and rules for buildings. London: BSI.
  9. British Standards Institution (2000), BS EN 206-1:2000 Concrete - Part 1: specification, performance, production and conformity. London: BSI.
  10. British Standards Institution (1994), BS 5950-4:1994 Structural use of steelwork in building - Part 4: code of practice for design of composite slabs with profiled sheeting. London: BSI.
  11. British Standards Institution (1995), BS 5950-6:1995 Structural use of steelwork in building Part 6: code of practice for design of light gauge profiled steel sheeting. London: BSI.
  12. Choi, J.Y., Park, Y.G., Choi, E.S. and Choi, J.H. (2010), "Applying precast slab panel track to replace timber track in an existing steel plate girder railway bridge", Proc. Inst. Mech. Eng. Part F: J. Rail Rapid Transit., 224.
  13. Chopra, A.K. (2011), "Dynamics of structures - theory and applications to earthquake engineering", 4th Ed., Upper Saddle River, NJ: Prentice Hall. Prentice-Hall International Series in Civil Engineering and Engineering.
  14. Dassault (2012), ABAQUS theory manual. Available at: https://things.maths.cam.ac.uk/computing/software/abaqus_docs/docs/v6.12/books/stm/default.htm (Accessed on 1st August 2016).
  15. De Silva, S. and Thambiratnam, D.P. (2011), "Vibration characteristics of concrete-steel composite floor structures", ACI Struct. J., 108(6), 1-9.
  16. El-Dardiry, E. and Ji, T. (2006), "Modelling of the dynamic behaviour of profiled composite floors", Eng. Struct., 28(4), 567-579. https://doi.org/10.1016/j.engstruct.2005.09.012
  17. Esveld, C. (1997), Low-maintenance ballastless track structures, Rail Engineering International Edition, No.3, 13-16.
  18. Feldmann, M., Heinemeyer, C., Butz, C., Caetano, E., Cunha, A., Galanti, F., Goldack, A., Hechler, O. Hicks, S., Keil, A., Lukic, M., Obiala, R., Shlaich, M., Sedlacek, G., Smith, A. and Waarts, P. (2009), Design of floor structures for human induced vibrations. Luxembourg: Office of the official publications of the European Communities.
  19. Freudenstein, S. (2010), "RHEDA 2000(R) : ballastless track systems forhigh-speed rail applications", Int. J. Pavement Eng., 11(4), 293-300. https://doi.org/10.1080/10298431003749774
  20. Griffin, D.W.P. (2013), Design of precast concrete steel-concrete panels for track support: for use on the Sydney Harbour Bridge, Honour Thesis, University of Western Sydney, Kingswood, Australia.
  21. Griffin, D.W.P., Mirza, O., Kwok, K. and Kaewunruen, S. (2014), "Composite slabs for railway construction and maintenance: a mechanistic review", IES J. Part A: Civil. Struct. Eng., 7(4), 243-262. doi: 10.1080/19373260.2014.947909
  22. Griffin, D.W.P., Mirza, O., Kwok, K. and Kaewunruen, S. (2015), "Finite element modelling of modular precast composites for railway track support structure: A battle to save Sydney Harbour Bridge", Aust. J. Struct. Eng., 16(2), 150-168. doi: 10.1080/13287982.2015.11465187
  23. Kaewunruen, S. (2014), "Monitoring in-service performance of fibre-reinforced foamed urethane material as timberreplacement sleepers/bearers in railway urban turnout systems", Struct. Monit. Maint., 1(1), 131-157 (invited). doi: 10.12989/smm.2014.1.1.131
  24. Kaewunruen, S. and Remennikov, A.M. (2007), "Field trials for dynamic characteristics of railway track and its components using impact excitation technique", NDT & E Int., 40(7), 510-519. doi: 10.1016/j.ndteint.2007.03.004
  25. Kaewunruen, S. and Remennikov, A.M. (2016), "Current state of practice in railway track vibration isolation: an Australian overview", Aust. J. Struct. Eng., 14(1), 63-71. doi: 10.1080/14488353.2015.1116364
  26. Kaewunruen, S., Remennikov, A.M. and Murray, M.H. (2014), "Introducing limit states design concept to concrete sleepers: an Australian experience", Front. Mat., 1(8), 1-3. doi: 10.3389/fmats.2014.00008
  27. Kaewunruen, S., Sussman, J.M. and Matsumoto, A. (2016), "Grand challenges in transportation and transit systems", Front. Built Environ., 2(4), doi: 10.3389/fbuil.2016.00004.
  28. Kim, H.Y. and Jeong, Y.J. (2006), "Experimental investigation on behaviour of steel-concrete composite bridge decks with perfobond ribs", J. Constr. Steel Res., 62, 463-471. https://doi.org/10.1016/j.jcsr.2005.08.010
  29. Kim, H.Y. and Jeong, Y.J. (2009), "Steel-concrete composite bridge deck slab with profiled sheeting", J. Constr. Steel Res., 65, 1751-1762. https://doi.org/10.1016/j.jcsr.2009.04.016
  30. Kim, H.Y. and Jeong, Y.J. (2010), "Ultimate strength of a steel concrete composite bridge deck slab with profiled sheeting", Eng. Struct., 32, 534-546. https://doi.org/10.1016/j.engstruct.2009.10.014
  31. Kimani, S.K. and Kaewunruen, S. (2017), "Free vibrations of precast modular steel-concrete composite railway track slabs", Steel Compos. Struct., 24(1), 113-128. doi: 10.12989/scs.2017.24.1.113
  32. Lam, D. and El-Lobody, E. (2001), "Finite element modelling of headed stud shear connectors in steel-concrete composite beam", (Ed., A. Zingoni), Struct. Eng. Mech. Compos., Elsevier Science, Oxford, 401-408.
  33. Lezgy-Nazargah, M. and Kafi, L. (2015), "Analysis of composite steel-concrete beams using a refined high-order beam theory", Steel Compos. Struct., 18(6), 1369-1389. https://doi.org/10.12989/scs.2015.18.6.1369
  34. Manalo, A., Aravinthan, T., Karunasena, W. and Ticoalu, A. (2010), "A review of alternative materials for replacing existing timber sleepers", Compos. Struct., 92, 603-611. https://doi.org/10.1016/j.compstruct.2009.08.046
  35. Matias, S. (2015), Numerical modelling and design of slab tracks - comparison with ballasted tracks, University of Lisbon.
  36. Max Bogl (2016), FFB slab track BOGL. Available at:https://maxboegl.de/en (Accessed on 1st July 2016)
  37. Mello, A.V.de A., da Silva, J.G.S., Vellasco, P.C.G.da S., de Andrade, S.A.L. and de Lima, L.R.O. (2008), "Modal analysis of orthotropic composite floors slabs with profiled steel decks", Lat. Am. J. Solids Struct., 5(1).
  38. Michas, G. (2012), Slab track systems for high-speed railways, Master Degree Project, Royal Institute of Technology, Sweden.
  39. Mirza, O., Kaewunruen, S., Kwok, K. and Giffins, D. (2016), "Design and modelling of pre-cast steel-concrete composites for resilient railway track slabs", Steel Compos. Struct., 22(3), 537-565. doi: 10.12989/scs.2016.22.3.537
  40. Peng, D., Wei, Z. and Liu, J. (2012), "The exploration and research of CRTS I slab ballastless track used in the freight lines", Appl. Mech. Mater., 253-255, 2031-2034. https://doi.org/10.4028/www.scientific.net/AMM.253-255.2031
  41. Perkins, N.C. and Mote, Jr. (1986), "Comments on curve veering in eigenvalue problems", J. Sound Vib., 106(3), 451-463. https://doi.org/10.1016/0022-460X(86)90191-4
  42. Remennikov, A.M. and Kaewunruen, S. (2008), "A review of loading conditions for railway track structures due to train and track vertical interaction", Struct. Control Health Monit., 15(2), 207-234. doi: 10.1002/stc.227
  43. Remennikov, A.M., Murray, M.H. and Kaewunruen, S. (2012), "Reliability based conversion of a structural design code for prestressed concrete sleepers", Proc. Inst. Mech. Eng. : Part F J. Rail. Rapid Transit, 226(2), 155-173. doi: 10.1177/0954409711418754
  44. Remennikov, A.M. and Kaewunruen, S. (2014), "Experimental load rating of aged railway concrete sleepers", Eng. Struct., 76(10), 147-162. doi: 10.1016/j.engstruct.2014.06.032
  45. Robertson, I., Masson, C., Sedran, T., Barresi, F., Caillau, J., Keseljevic, C. and Vanzenberg, J.M. (2015), "Advantages of a new ballastless track form", Constr. Build. Mater., 92, 16-22. https://doi.org/10.1016/j.conbuildmat.2014.06.099
  46. Setsobhonkul, S., Kaewunruen, S. and Sussman, J.M. (2017), "Lifecycle assessments of railway bridge transitions exposed to extreme climate events", Front. Built Environ., 3(35), doi: 10.3389/fbuil.2017.00035.
  47. Shim, C.S., Lee, P.G. and Chang, S.P. (2001), "Design of shear connection in composite steel and concrete bridges with precast decks", J. Constr. Steel Res., 57, 203-219. https://doi.org/10.1016/S0143-974X(00)00018-3
  48. Smith, A.L., Hicks, S.J. and Devine, P.J. (2009), "Design of floors for vibration: a new approach", Ascot: The Steel Construction Institute.
  49. Sugimoto, I., Yoshida, Y. and Tanikaga, A. (2013), "Development of composite steel girder and concrete slab method for renovations of existing steel railway bridges", QR of RTRI, 54(1), 1-11. https://doi.org/10.2219/rtriqr.54.1
  50. Tindall, P. (2008), "Aluminium in bridges", (Eds., Parke, G. and Hewson, N.) ICE manual of bridge engineering, 2nd Ed., London: Thomas Telford, 345-355.
  51. Tuler, M.V. and Kaewunruen S. (2017), "Life cycle analysis of mitigation methodologies for railway rolling noise and groundbourne vibration", J. Environ. Management, 191, 75-82. doi: 10.1016/j.jenvman.2016.12.075
  52. Venghiac, V.M. and D'Mello, C. (2010), The influence of the thickness of the slab and concrete grade on composite floors, Buletinul Institutului Politehnic Din Iasi.

피인용 문헌

  1. Resilience and Robustness of Composite Steel and Precast Concrete Track Slabs Exposed to Train Derailments vol.4, pp.None, 2018, https://doi.org/10.3389/fbuil.2018.00060
  2. Briefing: Dynamic mode couplings of railway composite track slabs vol.173, pp.2, 2017, https://doi.org/10.1680/jstbu.17.00193